Build your own DMR Hot SPOT
Рет қаралды 4,333
2 жыл бұрынAmazon support link amzn.to/33HhsOH
Power Tools and Oven Mitts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
Music: www.bensound.com/royalty-free...
Videos are for Entertainment only, Use these at your own risk.
@trollhummer Жыл бұрын
Very helpful!
@2TrailHikers 5 ай бұрын
👍
@RYVENANT Жыл бұрын
How hot are you running the iron? I mainly solder components onto drones and run at like 410C, but it looks like you're running a low temp and holding on the board long in this one. Pin holes are tiny, just want to make sure I don't fry anything
@2TrailHikers 5 ай бұрын
I needed a better iron when I built this got one now run 750f to do most of my projects like this now.
@mrhutchinsonmn 2 жыл бұрын
Will the newer Raspberry Pi Zero 2 W board work? The Zero W boards are out of stock on Adafruit, but I am seeing plenty of the 2 Ws at other retailers.
@2TrailHikers 2 жыл бұрын
I honestly don't know I haven't had tge opportunity to try one.
@trollhummer Жыл бұрын
I use a 2W. It works.
@lostbranchranch8646 11 ай бұрын
Cannot get the board to be found on my computer, tried installing driver, opened BlueDV and device not found, cannot even use device manager (on three different computers) to find the device... help, please?
@2TrailHikers 11 ай бұрын
It's been a while since I built this. Do you have an os on the micro sd card? If I remember right you access the pi via wifi after the os is loaded to the SD card and installed.
Radio Rev - G5REV
Рет қаралды 6 М.
Bekmobil shorts
Рет қаралды 2,6 МЛН
notebook-31
Рет қаралды 69 М.