How to Pay Off Your Laser (engraving tumblers with the xTool D1)
Рет қаралды 219,960
2 жыл бұрынHow to pay off your laser (using the xTool D1). How to Laser Engrave Tumblers. Now that you’ve got the laser. What are you going to do with the laser? This is a simple way to make money with your laser by engraving tumblers. It’s a hot market. The materials are cheap and it can be done in the background to pay off your laser.
xTool:
store.xtool.com/?ref=RyzFeVwU...
Use Promo Code: BDBXTOOL for 8% off
*Affiliate Link
Check out the NEW WEBSITE: www.builddadbuild.com/
MERCH!! (help the channel out by picking something up for yourself!): build-dad-build.creator-sprin...
DISCORD: / discord
PATREON: / builddadbuild
DISCLAIMER:
Working with Fire, lasers, Electricity and Power Tools is extremely dangerous. Please use caution if you are attempting anything in these videos.
Also, please drink responsibly.
_____________________________________________________
USED IN THIS VIDEO (affiliate links):
xTool:
store.xtool.com/?ref=RyzFeVwU...
Use Promo Code: BDBXTOOL for 8% off
TUMBLERS:
amzn.to/3pQpmDJ
Melamine Sponges:
amzn.to/3q5HFFc
Link to all my tools:
www.builddadbuild.com/toolshome
_____________________________________________________
Don’t forget to Like, Comment & Subscribe:
/ builddadbuild
_____________________________________________________
ADD ME ON:
Subscribe: / builddadbuild
Patreon - / builddadbuild
Discord: / discord
Instagram: / builddadbuild
Facebook: builditburnit
Twitter: / builddadbuild
Pinterest: / builddadbuild
TikTok: / builddadbuild
_____________________________________________________
MUSIC:
Love on Fire
#builddadbuild #xtool #diodelaser #tumblers #engravingtumblers
@brittanyanderson3777 6 ай бұрын
Okay I love that you show your failed attempts too. That's so real of you. Came across your page to learn while I wait for my D1 to get here. You're great!
@dreamkiss4u 2 жыл бұрын
just a tip, you can just use tumbler or anything you will try new that you have not experienced with and make a diagram with lots of squares each one with a different setting so that in one tumbler you have all the settings on it so which ever you like the best with the most detail on that setting you just use that setting for all the rest so you wont have to waste lots of tumblers for no reason....learned that from an actual laser engraver guy on his youtube page ;-)
@BuildDadBuild 2 жыл бұрын
Thanks for the tip! Cheers
@buzmil Жыл бұрын
Figured this out on my own after wrecking a few of em lol
@josephKEOarthur Жыл бұрын
Blue tape and low burn settings are your friend for prototyping.
@dreamkiss4u Жыл бұрын
@josephKEOarthur problem with blue tape is that you will never get a real sense of what it will really look like if you trying to burn something on a different material because other materials don't burn the same so it's best to do a sample of every power setting in the can't type of material your going to be doing it on.
@karenriley8529 2 жыл бұрын
Awesome was the final results. Now talk us through step by step how you got there. I want you to know, we also Appreciate the screw-ups. It helps us greet the fears/challenges. Thanks a trillion 💜💗
@brandondixon4457 Жыл бұрын
YA WHAT SETTING GOT TO THAT RESULT?
@scottchalmers3033 Жыл бұрын
Love your channel and found a lot of good tips. I’m just having a heck of a time with tumblers. Can’t get one to stay shine or be detailed without visible lines…have changed a ton of sittings and tried gradient grid but no luck.
@Jimc4007 2 жыл бұрын
Looking good 👍 there Nick! Can't wait to see what you come up with next.
@BuildDadBuild 2 жыл бұрын
Cheers, Jim. Hope you had a great NYE
@icoblue 2 жыл бұрын
A much easier method of alignment (assuming you move that laser from time to time) would be to measure distances from that convenient targeting dot on your stepper motor to the center of the rotary axis and end of the tumbler and either creating a fixture in your software (if software supports fixturing) or simply aligning the base of the rotary with a square to the laser frame and moving the known distance from the targeting dot to engraving zero. The machine is capable of both measuring and setting exact distances. There is no reason to eyeball it. My two cents. :)
@SkionMars 2 жыл бұрын
Great content. Love that you showed the failure followed by success.... so many questions since I want to get one....
@jerkythebeef8653 2 жыл бұрын
HAPPY NEW YEAR!! Keep them coming.
@BuildDadBuild 2 жыл бұрын
Sure thing, brother! Cheers
@mariewood8267 2 жыл бұрын
I absolutely love your videos and your sense of humor is so awesome! Keep it coming!
@BuildDadBuild 2 жыл бұрын
Thank you!
@papasworkshop2165 2 жыл бұрын
New subscriber here! Just got mine working, needed a new motherboard. Thanks for the awesome videos. Keep'em coming!
@BuildDadBuild 2 жыл бұрын
Will do! Cheers
@goodloffg 2 жыл бұрын
Foaming citrus cleaner and a rag works amazing getting the soot off. The magic erasers can remove parts of the remaining powder coat depending on the quality.
@BuildDadBuild 2 жыл бұрын
Good to know!
@goodloffg 2 жыл бұрын
@@BuildDadBuild I fought forever with cleaning the residue off lasered metal, and this worked the best
@a.s.9918 Жыл бұрын
Beautiful job. Thanks for the info
@brianrichards6303 2 жыл бұрын
Hey thanks for all the help. I'm pretty new to all this and I have a question. I got the skinnier tumblers but the cylinders slide down on the rotary tool. Is there a way to keep this from happening besides bracing? Probably an easy answer, just wondering what others do. Tia
@BuildDadBuild 2 жыл бұрын
Sure is. You need to put a little weight inside the tumbler. Like a beanbag or a ziplock bag full of rice. Cheers
@JORGINHODONASCIMENTO Жыл бұрын
great video, i am looking for an awesome feel and look to my tumblers, therefore i want depth in the actual laser engraved materials, not just etching or marking. Would you give me some advice regarding settings so i can achieve my goal. I don't want my products to look as if someone used a sharp object to draw on them but actual layers of both areas. thank you
@flowroll777 Жыл бұрын
Found your channel after buying my xTool D1, I haven't even fired it up yet, but I'm watching a lot of your content now. Thanks man!
@BuildDadBuild Жыл бұрын
Welcome aboard!
@patrickkemp8047 2 жыл бұрын
Great video! I ham getting so many ideas.Thanks so much.
@BuildDadBuild 2 жыл бұрын
That's awesome Patrick! Cheers
@timmoore7258 Жыл бұрын
New to this and just ordered my P2 laser. Thanks
@millionmilerclub Жыл бұрын
That came out beautiful.
@geauxracerx 2 жыл бұрын
You could have inverted the black and the white and gotten the results you were looking for with the original dragon. Though it would require you to do more work in photoshop/illustrator to frame up/outline it, since it would be removing the background. Just like the second design did.
@junedorning1711 2 жыл бұрын
I really enjoy watching this video as I am considering getting a laser I am learning all I can before purchasing one
@BuildDadBuild 2 жыл бұрын
Cheers! Let me know if you have any questions.
@stuartellington5215 2 жыл бұрын
I'm very interested in starting a side hustle with engraving and learning how to do it. I'm guessing painting with rattle can black and retesting would be out because it is a different coating and would produce different results?
@BuildDadBuild 2 жыл бұрын
Correct
@MyBigThing2010 2 жыл бұрын
Tip: go to your local salvation army or goodwill (also yard sales) and buy all the used ones you can find for testing purposes. Also you don't need to test the entire image...a 10mm sliver of the image will be enough for you to tell what's happening..... meaning you can easily use one used tumbler for 15-20+++ test prints!
@Hobbist-Fishing-Gardening 2 жыл бұрын
Hello, I like to know with the 10w D1 xtool can it cut aluminum, Stainless steel, and wood? Thank you, looking to make key chains. Thank you Dean
@BuildDadBuild 2 жыл бұрын
Nothing short of a powerful fiber laser can CUT metal. Cheers!
@ziadabololo9894 Жыл бұрын
Are you hsve more video for coumputer instraction how we work at xtool d1 i have but didnt know how to work it on computer and the speed all for begining on the machine
@kandiecandelaria3134 Жыл бұрын
Just got the D1 am excited don’t know what I want to make first! Thanks for sharing!
@KimandGarrettmakeit 2 жыл бұрын
Great Video! Awesome Final Tumbler, TomorrowNick!
@BuildDadBuild 2 жыл бұрын
Thanks guys! And great to meet you! Cheers
@minisinscale1944 2 жыл бұрын
Just a thought, to make alignment of the rotary table easier could you engrave a 3-5 inch straight line on the base/board to align/square the rotary table and not have to eye-ball it?
@BuildDadBuild 2 жыл бұрын
I have since burned a grid into a spoil board. Just hadn't done it yet! LOL Cheers
@aidasglitzglamz4559 2 жыл бұрын
Watching your videos, I ended up getting the D1 with your discount by the way so thank you! Now I keep messing up tumblers. The engraving is too dark against the coated steel color. What settings do you use?
@BuildDadBuild 2 жыл бұрын
I use the coated metal settings. Make sure you're cleaning with a magic eraser after the engrave. Cheers
@austen9988 Жыл бұрын
mine always ends up very gray in the engraved part... im at 100% power70mm/s. what am i doing wrong
@Chris-qz1nw Жыл бұрын
i got a xtool d1 pro i got a laptop but it did not work what do you use
@American.Divergent 6 ай бұрын
What speeds,dpi,and power did you cut that at and how long did it take?
@lisascreationsla Жыл бұрын
Great video! I'm learning so much from you as a newbie. How could you make the silver park under the black coating gold or a different color?
@BuildDadBuild Жыл бұрын
Mask the whole thing. Run your engrave and then spray it a different color.
@robertaigner3644 2 жыл бұрын
Hi quick question if you might have an answer I noticed on your cups you chose “cylinder working” on laser box basic but it’s not coming up on mine. Any idea why mines different? Thank you 🙏🏻
@BuildDadBuild 2 жыл бұрын
The latest update changed that setting (is my understanding). I haven't had a chance to do the update yet. Cheers
@courtneylussier726 2 жыл бұрын
I've been having issues with burning of the stainless steel on the cup as well as striations on the cup from the laser. My guess is I'm struggling to find the ideal settings, do you have any suggestions?
@BuildDadBuild 2 жыл бұрын
Run a power and speed grid on one of the "mistake" tumblers and pull your settings from that. Cheers
@colwebbsfmc 2 жыл бұрын
So, will this laser cut the nametag acrylic material? Like, the material with a surface color that is black or white underneath that you'd slap a magnet on the back of and make a nametag?
@BuildDadBuild 2 жыл бұрын
You can cut acrylic with this laser. I don't do it much. And there are some things to look out for. Check out this article for more info: www.weetect.com/laser-cutting-acrylic/ Cheers
@jhammer929 2 жыл бұрын
Hey man!! I just found your channel...Great Video! I've been thinking about adding something like this to my business. What was the runtime from start to finish on the final tumbler? That one is badass! Keep up the great work! I'm a new subscriber for sure!
@BuildDadBuild 2 жыл бұрын
Hey Jack! Welcome. It took about 30-40 minutes for that one. Cheers
@dakodajbraswell 2 жыл бұрын
I got one of these and have paid this off so easily by doing things for nurses, friends, and family. A great way of passive income that I can do whenever.
@BuildDadBuild 2 жыл бұрын
Exactly! And congrats on paying it off!!
@MegaDwsmith 2 жыл бұрын
That last one came out Mint!! I've had the same thing doing slate black and white always comes out better than an image. I got some cheap mirror from Lowes I'm gonna try burning this week you should do a video on burning mirrors
@BuildDadBuild 2 жыл бұрын
I'll get there eventually, I'm sure. LOL Cheers
@Thenimrodswitarod 2 жыл бұрын
how long does it typically take to do I have it set up and its taking almost an hour. speed is 70mm/sec and power 100% and its not shiny after its almost burnt looking
@BuildDadBuild 2 жыл бұрын
That one took about 30-40 minutes. Cheers
@bradirvin3932 2 жыл бұрын
Great videos. Have you used the rotary tool to engrave a tapered tumbler or glass and if so how to keep them from wobbling in rotary tool.
@BuildDadBuild 2 жыл бұрын
Just did a video on that! LOL kzfaq.info/get/bejne/gaqVY9aInKnYd3U.html Cheers
@bradirvin3932 2 жыл бұрын
@@BuildDadBuild thanks for the video.
@daimyo2k 2 жыл бұрын
Hi BDB! Thanks for the vid... great stuff! Question, can the xTool D1 engrave on a convex surface? If not, do you know what laser does?
@BuildDadBuild 2 жыл бұрын
Depends on how convex. Slight curvature you can split the difference with the focus (like on a flask). But without a jig of some sort for more convex surfaces I think you'd run into a focusing problem. Cheers
@daimyo2k 2 жыл бұрын
@@BuildDadBuild Hey BDB, thanks for the reply! There is about .25" difference on the diam., so .125 of the rad., split would be .0625. Do you think that would be safe from any distortion??
@derricksteele2379 Жыл бұрын
Love your videos. Just bought DI Pro with RA2 Pro Rotary and Air Assist and can't wait to get it in the mail and start rocking. Where did you get the dragon file black and white for the tumbler? It is dope.
@BuildDadBuild Жыл бұрын
I just googled “tribal dragon” LOL but email me and I’ll see if I still have the file. Nick@builddadbuild.com
@tylermoore6667 2 жыл бұрын
new to the XTool D1 and Also the Build Dad Build channel. I have a 5W version just purchased and learning on. Do you happen to have any good settings you would run for what seems some more thick powder coat? I have some mugs I am working on and the results vary between not able to remove the black residue or by over powering it distorts the image.
@BuildDadBuild 2 жыл бұрын
If the coated metal setting isn't working slow it down for better results. Are you cleaning the tumbler afterwards? Mine always look a little smokey before I clean them up. And check out this video to help with distortion. kzfaq.info/get/bejne/jNCcqJtlx6uphqM.html Cheers!
@marvincarpenter9463 Жыл бұрын
I have the D1 Pro, i'm having problems with it not burning through the covering on the tumblers, I have to have it on the highest setting and slowest speed to get a ok finish. Are you using the blue diode laser head or the IR head? Thanks for any help!!
@BuildDadBuild Жыл бұрын
Blue diode.
@RRGreiner 2 жыл бұрын
Your enthusiasm has caused me to purchase this product XD. I also subscribed, awesome content!
@BuildDadBuild 2 жыл бұрын
Thanks Homie! Welcome Cheers
@reubenrosofsky4791 2 жыл бұрын
excellent video just found your channel looking to get into laser engraving. i see you have two laser machines which one do you like best and why?
@BuildDadBuild 2 жыл бұрын
XTool D1 10w. Modular design, easy set up. 10w power. User friendly. Cheers
@dianabostany914 2 жыл бұрын
"guns blazing ...may work in the bedroom ..." 😂😂😂 Awesome video, thanks!
@xXEvilReaperXx 2 жыл бұрын
I'm not sure if you've tried this, but I have the same phone case that you have and lasered some pretty cool designs in the back. I was selling them with custom designs and made a killing.
@The_Dirt_Merchant 2 жыл бұрын
how long did it take for the laser to etch the final result? I am looking at buying one and this is a great help, but I am curious as to time/tumbler ratio
@BuildDadBuild 2 жыл бұрын
About 35-45 minutes. In my testing the 20watt unit can engrave faster. But I haven’t tried it with the rotary yet.
@The_Dirt_Merchant 2 жыл бұрын
@@BuildDadBuild that's not bad at all! I know the dialogue lasers especially a 10w, isn't everybody's dream per se, but I'm really liking this machine. Of course I wanted to go with something like a gloforge, but who can afford something like that as an entry level?! I appreciate your response, as well as your videos. I'm going to get to ordering and start designing!
@mexidep 2 жыл бұрын
You mentioned that the 5W would handle this project, but I also want to personalize wood, i.e. cutting boards and such...would the 5W still be ok? I don't plan on cutting through any materials as you did in a previous video, so I wonder if the 10W is even necessary....thanks for your time and keep it up (that's what she said!)
@BuildDadBuild 2 жыл бұрын
Absolutely. The 5 watt is plenty powerful to engrave wood. I would only recommend the 10 watt if you want the option to cut thicker material. Cheers, Oscar!
@mexidep 2 жыл бұрын
@@BuildDadBuild Thank you, brother, and "clinkies" to you!
@chrisr3545 Жыл бұрын
Great channel, have learned alot. Newbie here…is it possible to “curve” texts in laserbox basic and/or xtool creative space? Thank you in advance
@BuildDadBuild Жыл бұрын
I don’t think so.
@gandikha 2 жыл бұрын
My friend thank you for this video, is that engraver 10w or 5W o want to buy it only for tumblers Again thank you
@BuildDadBuild 2 жыл бұрын
That unit is a 10w. Cheers!
@pacoesquivel43 2 жыл бұрын
One question, what laser is it? I bought the xtool d1 5w but it doesn't graver the tumblers correctly. I have to pass a sponge with which the dishes are washed to clean where the laser passes. The problem is that the tumbler is scraped all over that part.
@BuildDadBuild 2 жыл бұрын
Its the 10w D1
@pacoesquivel43 2 жыл бұрын
@@BuildDadBuild I already bought the tumblers from your link and they work perfectly with the 5w laser I guess the others don't work because of the slightly thicker material
@ComgrowOfficial 2 жыл бұрын
Thanks so much for your sharing👍👍👍
@BuildDadBuild 2 жыл бұрын
Sure thing!
@DadsRCHangar Жыл бұрын
Guess I have to get me a roller now as well. 🤔. Great research.
@meaganvilar7784 2 жыл бұрын
Thank you for your video. I am new to this and trying to make a tumbler. The right hand of my screen does not have all those options. Any idea on how to get them? I only have power, speed and number of passes.
@BuildDadBuild 2 жыл бұрын
Click on your image to get the additional menu items
@meaganvilar7784 2 жыл бұрын
@@BuildDadBuild Thank you. I am specifically looking for image mode and even when I click on the image I am not getting that option.
@courtneylussier726 2 жыл бұрын
When I engrave tumblers (Polar Camel, Yeti, Etc.) my 'charring' from the laser does just wipe off like yours does in the video. I have to scrub the cup for about 5-8 minutes to get all of it off. If it is a colored cup it takes even longer as I have to work to get all of the black out of the corners of the engraving. I'm using water and a magic eraser. I've also tried acetone which worked like a dream but it took the finish off the cup... Any suggestions?
@BuildDadBuild 2 жыл бұрын
Just gotta tweak your settings. Yeti's, etc have a thicker powder coating on them. Cheers
@courtneylussier726 2 жыл бұрын
@@BuildDadBuild I've run a power/speed test and I'm using the setting that look the best. I increased my lines per cm today and that helped with the gridding I was experiencing but makes wiping off even more difficult. What settings do you typically use for a Yeti? I'm using 60 speed, 80 power 100% sharpness
@victorgreen9123 2 жыл бұрын
What power and speed did you have the final burn on? Loving your content as well
@BuildDadBuild 2 жыл бұрын
Thanks Victor! 50% Power 30 mm/s Cheers
@garthlemere3245 Жыл бұрын
I am using the D1 to engrave tumblers and the engrave time says, for example, 35 minutes at 50 speed setting. But the actual time is almost 4-5 hours! I don't know what I am doing wrong. Please help! I'm new to this and I'm guessing it's a simple fix. I've also worked in Lightburn but the dimensions don't come out right, (big sigh with frustration). Thanks in advance.
@BuildDadBuild Жыл бұрын
Not sure. It might be the type of file. If you have a bunch of white space around your image the laser tracks that ...
@DelaneyFarmer 2 жыл бұрын
Loving your videos. New at this. For your tumbler, what were your settings? Speed/Power. Were they the stock settings or did you alter them any?
@BuildDadBuild 2 жыл бұрын
I just use the factory settings for coated metal. They seem to work just fine. Cheers
@bixik77 2 жыл бұрын
@@BuildDadBuild How many passes?
@BuildDadBuild 2 жыл бұрын
@@bixik77 1 pass
@JakeDold 2 жыл бұрын
Thanks for the video! I've been trying to engrave a powder coated Yeti tumbler and I keep getting a tone of residue. When I try to clean it off I have to scrub so hard that I'm damaging the rest of the powder coating. Would you be up for trying a yeti tumbler and showing us if you can get better results?
@BuildDadBuild 2 жыл бұрын
I tend to steer clear of Yeti tumblers, because they're so expensive to begin with there's not a whole lot of value to trying to sell them... Cheers
@DaveIngle1 2 жыл бұрын
Quick question and not a poke the bear comment but, the last image is definitely not the first image. So, was it more of a poor image selection and not a settings issue? Really want to know how critical image selection is. Thanks!!
@BuildDadBuild 2 жыл бұрын
Poor image selection. I thought I could get better grey tones, but with the coated tumblers it seems like black and white are much easier to reproduce. Cheers
@mlarsen77 2 жыл бұрын
ive watched several of your xtool D1 videos and im trying to find the one where you made a change to rapid movements to slow them down a little because it was causing your tumbler to slide past the position. Im unable to find it. Where was that setting? and was it lightburn? still searching. love your content. keep it up!
@BuildDadBuild 2 жыл бұрын
Thanks brother. That setting was in Laserbox Basic.
@skebo413 5 ай бұрын
Dig your videos! I am very new to engraving and your videos have been a great help. I have been trying all day trying to engrave tumblers and failed. I use all the settings suggested and get that shiny stainless steel to come through. Always dark. Just bought the Xtool D1 Pro with the RA2 Pro. Any words of wisdom for this sub-noob. Thanks.
@BuildDadBuild 5 ай бұрын
Run a speed and power grid for best settings.
@axeldejesus2060 Жыл бұрын
Hello NIck. Thanks for your videos, I really enjoy them and find them very informative and of course funny. I have a question for you please. Which machine (s) do you recommend for cutting puzzles? Thanks
@axeldejesus2060 Жыл бұрын
I also sent you an email. Thanks
@ervacowden6034 2 жыл бұрын
I ordered my D1 waiting for it to come in can you recommend videos of where to start and how to start ? I purchased my D1 to do tumblers and leather patches mostly is what I wanna do
@BuildDadBuild 2 жыл бұрын
Sure thing. Check out this playlist! kzfaq.info/sun/PL0W-uMVelvoOq-0Q_jKNhqKASrfD85Eo_ Cheers
@jwar2163 2 жыл бұрын
Thanks for the information. I want to purchase a laser engraver, but there is so much information out there it is making that decision difficult to make. Like do I purchase a CNC that is laser capable? Or do I just purchase a laser engraver. Then there is software I like Lightburn and some of these machines don't work with it. Then there is the different wattage lasers. I want a Rotary unit, a laser unit that Lightburn works with and can be upgraded.
@BuildDadBuild 2 жыл бұрын
Glad it was helpful!
@markhaynes7976 Жыл бұрын
Hey sir, do you have any trouble with designs on conical / tapered objects? Drinking glasses and tumblers? I am going to upgrade to the D1 but my laser is stationary and I think that may be why it distorts the image. Thanks in advance!
@BuildDadBuild Жыл бұрын
It’s probably slipping on the rollers.
@markhaynes7976 Жыл бұрын
@@BuildDadBuild Thank you! I thought that too, so I used rubber bands but it still did it. There is a math equation that seems to help with the tapered stuff but I watched your videos and you never had any problem. If I do straight walled tumblers its fine. I thought it may be because my laser head doesn't move like the D1 does. Again, thanks for the help!
@Xsoffroading Жыл бұрын
Thanks for the video you inspired me to use a laser to do a business question I’m looking for a laser to do tumblers and. Imputed any ideas.
@BuildDadBuild Жыл бұрын
The xTool has one of the best rotaries for a diode laser. The RA2 www.xtool.com/products/xtool-ra2-pro-for-d1-with-risers?ref=RyzFeVwU5QGEQ& Cheers!
@saiyankingproductions2649 2 жыл бұрын
Could you tape off the tumbler and paint fill after you clean up?
@BuildDadBuild 2 жыл бұрын
I don't see why not. You'd need to seal it with something afterwards. Cheers
@nativejay7483 2 жыл бұрын
Hello. I saw a color tiles video. W 3 colors. But, you just did a tumbler. Could you do it on a tumbler then clear coat it?
@BuildDadBuild 2 жыл бұрын
Sure! Cheers
@mikekrajnak 2 жыл бұрын
1st off love your videos . Was wondering If you've done any on cutting and engraving thin cork board with the xtool d1 10 watt ?
@BuildDadBuild 2 жыл бұрын
I haven't really worked with cork at all. However, I've heard it sells well. Cheers
@robertholt5163 2 жыл бұрын
Would you send me the link to your propane torch gun please. Do you have a CNC? Or a combo with a laser? I need your torch first though.
@BuildDadBuild 2 жыл бұрын
Grill Blazer (torch): Use Promo Code: builddadbuild for 10% off grillblazer.com/discount/builddadbuild I have a CNC and I have several lasers. Cheers
@Daemonforce-Gaming Жыл бұрын
awsum videos very intuitive your the man :)
@franklopez406 2 жыл бұрын
Great video, very informative, quick question maybe I missed on the video but what were the settings for the final awesome graphic... Great job. New follower
@BuildDadBuild 2 жыл бұрын
The settings were the Laserbox's preset for coated metal. Cheers!
@franklopez406 2 жыл бұрын
@@BuildDadBuild thanks for the response
@elmknights1 Жыл бұрын
Will this 5 or 10 watt penetrate a Yeti Tumbler Other videos are recommending the 75 Watt
@BuildDadBuild Жыл бұрын
You can do it with the 10W. Not sure about the 5.
@laserphoenix6822 2 жыл бұрын
make a jig to set your rotary in so its always lined up, also use LA's totally awesome to get the soot off the cups its cheap at dollar tree and works great then i spray with alcohol for quick clean up or wash
@richardstokes7508 2 жыл бұрын
First time watching your channel, love it! If I can make a suggestion, next time you make a mistake on a tumble, don’t waste another one, just spray paint it, and run your test again.
@BuildDadBuild 2 жыл бұрын
Thanks for the tip! Cheers
@goodloffg 2 жыл бұрын
But burning off spray paint is not the same as removing powder coat. What may look promising may not be. If these lasers are like the CO2 overshooting the power won't matter because it will not harm the metal on the cup. You would need a fiber laser for that
@bhutch216 2 жыл бұрын
@@goodloffg not true. If you run it too slow, you end up marking the bare metal as well and you get a dark result and see the lines.
@aidasglitzglamz4559 2 жыл бұрын
@@bhutch216 I think that has been my downfall. What setting is just right?
@bhutch216 2 жыл бұрын
@@aidasglitzglamz4559 70% at 100mm/s but do 600 dpi and set the focus probe about 1/4” off center so it’s a little lower. Clean with LA Awesome and a magic sponge. If there’s any char, film or tint left, rub gently with some acetone.
@michellefreeman4771 2 жыл бұрын
How do I eliminate banding?? My image may be perfect and then I have 3 lines of banding on the side of it
@BuildDadBuild 2 жыл бұрын
There are several issues that cause banding. 1 - loose belts 2 - the cup is slipping on the rotary 3 - poor image quality 4 - bad g-code
@steveh3690 2 жыл бұрын
Ive got an ATOMSTACK S10 pro, using LaserGRBL and getting poor results on painted tumblers and glass.. Any tips? Going to try Lightburn.
@BuildDadBuild 2 жыл бұрын
Email me pix of your issues. nick@builddadbuild.com
@steveh3690 2 жыл бұрын
Still learning, but figured out my problem, thanks anyway. Had the speed too high haha. Found that I'm not a fan of Lightburn too.
@joshjohnson4858 Жыл бұрын
I'm currently looking into getting a xtool d1 pro what kinda of computer would be good for running light burn and other software for the laser ? Thanks in advance
@BuildDadBuild Жыл бұрын
You don’t really need big stats on a computer. I bought a refurbished lappy from new egg. Just don’t get a Chromebook
@joshjohnson4858 Жыл бұрын
@@BuildDadBuild thanks for the reply 👍
@escambiamartialarts2349 2 жыл бұрын
Cool cup, the first video I look at and you do my school logo. Awesome job.
@BuildDadBuild 2 жыл бұрын
Thanks!
@jendavis78 Жыл бұрын
That is amazing ❤
@JKeenam 2 жыл бұрын
love your channel!
@BuildDadBuild 2 жыл бұрын
Thank you! Cheers
@raymascia8498 2 жыл бұрын
what are you using for exhausting the fumes out of the work space ?
@BuildDadBuild 2 жыл бұрын
Right now the bench is right up against a garage door. So I open that and have a large exhaust fan blowing out. Probably should build an enclosure...LOL Cheers
@APD6847 2 жыл бұрын
Great video! I'm about to buy one to start a little side business!!
@BuildDadBuild 2 жыл бұрын
Nice! It'll definitely pay for itself. Cheers
@brenthoughton5737 2 жыл бұрын
Hey brother I’m getting lines after my engraving of the tumbler and IdK why!! Do you know why?? It’s vertical lines past the image!
@BuildDadBuild 2 жыл бұрын
Usually means you need to update the firmware.
@rpace6821 2 жыл бұрын
What were your settings for the last engrave before you changed image to blk n white?
@BuildDadBuild 2 жыл бұрын
I'm really not certain. There were too many "variations" when I was messing around with it. Sorry Cheers
@rpace6821 2 жыл бұрын
Also their latest KZfaq on Parameters was helpful!! BTW Love the Videos, Keep em comin!!
@jf6720 2 жыл бұрын
Very cool! What if you have a tapered tumbler that get larger towards the top?
@BuildDadBuild 2 жыл бұрын
I haven't done them yet, but I've seen folks put a wedge under one end of the rotary tool to level the engraving surface. Cheers
@luisecar1 2 жыл бұрын
you could use a roll of blue tape
@MrChamz99 2 жыл бұрын
Any idea why I keep very light lines of the paint left over. With bigger designs I can hit it with some fine fine steel wool.
@BuildDadBuild 2 жыл бұрын
Sounds like you may have a loose belt, or the rotary is either not set to the right width or is slipping for some reason. If you lower your speed, does it go away?
@MrChamz99 2 жыл бұрын
@Build Dad Build I will dou le check the belts and I will lower the speed to see what is the results. I will get back you. Thanks for responding.
@MrChamz99 2 жыл бұрын
@Build Dad Build I went through everything and it seems like your recommendation of the speed really helped. I appreciate your help.
@justinmunoz3572 2 жыл бұрын
Hey. Awesome video. Been wanting to get into the laser business but I’m just having a hard time find the right one. Which one do you have ?
@BuildDadBuild 2 жыл бұрын
I have several. LOL. The one in this video is the xTool D1 (I'm pretty sure the link is in the bio). But if you have more specific questions, don't hesitate to email me. nick@builddadbuild.com Cheers
@marktilley3248 Жыл бұрын
What type and brand of laser are you using?
@mpcaz 2 жыл бұрын
I just bought a D1 with the Tumbler attachement and the Air Assist. Now I need to Justify the purchase!
@BuildDadBuild 2 жыл бұрын
Get to work, brother! Cheers
@GaryPetty 2 жыл бұрын
When you do the Tumblers do you seal them with anything and if so could I have the link
@BuildDadBuild 2 жыл бұрын
I do not seal them.
@sherryminton4505 8 ай бұрын
Can this laser be used in a side room in the house? Interested for expanding my business. I use a side bedroom/craft room for all my projects.
@BuildDadBuild 8 ай бұрын
I’d look into something enclosed like the xTool S1
@jeffguindon3035 Жыл бұрын
Just wanted to say I love your work and you make these video's interesting and informative. I have a laser master 3 and was wondering I am engraving a name brand tumbler and the black residue is hard to come off. I have tried your method but still leaves lots of soot! It almost feels like the powder coating is burned into the stainless. Should I be slowing down the laser or reducing the power. I run it at 1000 mmm @100%. when I do the Amazon cheaper brands I use 2000 mmm @ 85% power and works great! Just wanted your input to see what you think! Thanks in advance! Love the channel!
@BuildDadBuild Жыл бұрын
You’d have to run a power and speed grid to be sure. It could be possible you’re not burning Al the way through the powder coat.
@jeffguindon3035 Жыл бұрын
@@BuildDadBuild Do you know where I can find a burn grid? Thanks again for the quick reply! I slowed down by half and I got better results for sure! Do you think that cold could be a factor as well? I am using the laser in my garage and it can get a bit chilly, I do run a heater in there when it gets really cold in these northern winters! Again much appreciated I always look forward to your new vids they really do help!
@larryh.4629 2 жыл бұрын
Happy and productive new year Nick to you and yours.9
@BuildDadBuild 2 жыл бұрын
Thanks, Larry! Cheers
@SixTHSUN63 Жыл бұрын
Love your channel, been super inspirational, and I'm looking to make an XTOOL purchase now. However, BEFORE I BUY, can I ask you if there is anything done in these videos, with a 10W machine, that could not be accomplished with a 5W Pro? I know you say tumblers wouldn't be a problem inthis video, but I'm wondering if there is anything else that may be?
@BuildDadBuild Жыл бұрын
You're sacrificing speed and cutting power
@SixTHSUN63 Жыл бұрын
@@BuildDadBuild First off, thank you for getting back so fast. I’ve asked questions of gaming youtubers, movie youtubers and more, and if anyone answered, they’ve never gotten back so fast. I REALLY appreciate it! As for your answer, I just wanted to know if that was all. I think I’ve done good research, I’ve seen that speed and cutting power will be affected, but considering how good the XTOOL seems to be, I was wondering if that would be all, and whether the 5W would still “pretty much” accomplish what a 10W could, albeit a bit slower. I recently had a job where I laser engraved weapons parts for the military. I never used a laser before that gig, but in my spare time, I learned how to use the machine on my own for a few personal projects (metal business cards, tumblers, etc). So I figure it’s a skill I can learn to do at home, and I was looking for a good starter machine to do it. The machine I used at work was 100k+, but for what I’m trying to do, I feel like your videos have proved, the XTOOL can do it on a smaller scale. So again, thank you for getting back and the information! I will be looking into your patreon🙏
@natashaorta9861 2 жыл бұрын
Hi good afternoon I purchased a Xtool D1 machine but when I engrave cups the picture never comes out. It only engraves a line. I save the pictures under jpeg, png or take a screenshot but they still come out like this. I set up my machine correctly because I can engrave on a flat surface it’s just when I try to do cups it comes out like that
@BuildDadBuild 2 жыл бұрын
Are you switching to rotary on your preview screen? Cheers
@natashaorta9861 2 жыл бұрын
@@BuildDadBuild My rotary was vertical and I didn’t turn it horizontally. Thank you for the reply!
@nigeljukes9824 Жыл бұрын
Great video...just got the m1 10 w and mark 1 rotary...will this method work with my machine? Keep up the good work
@BuildDadBuild Жыл бұрын
It should, yes.
@surgev9951 Жыл бұрын
Great video dude! Showing mistakes and trail and error is where it is at. Kuddos
@BuildDadBuild Жыл бұрын
Cheers, Homie!
Eater Straw Hat
Рет қаралды 23 МЛН
Build Dad Build
Рет қаралды 14 М.
HOW TO ENGRAVE STAINLESS STEEL TUMBLERS | ENGRAVING YETI MUGS | LASER ENGRAVING MUGS | LASER MARKING
Maker Experiment
Рет қаралды 137 М.
JT Makes It
Рет қаралды 12 М.
ПОТОК AI
Рет қаралды 4,6 МЛН
MotoRaido
Рет қаралды 9 МЛН
Настя, это где?
Рет қаралды 4,3 МЛН
Slavka Ivanov
Рет қаралды 11 МЛН