Building 3D Patterned Cutting Boards Part 2

Рет қаралды 16,259

2 жыл бұрын

This is the last half of my build process for 3D patterned cutting boards. Part 1 documented the first half and you can watch that here: y2u.be/1eg9t-XpGvI
I used maple, walnut & cherry and finished everything with mineral oil before sealing with beeswax.
Originally, I wasn't planning on filming this entire build. Just a clip here and there to post on the other platforms (Instagram/Tiktok). After a little ways into it, I realized I had been filming almost everything anyways and figured I'd go all in. I decided it was too late to switch to the horizontal 16:9 ratio that's ideal for KZfaq and and chose to stick with capturing everything in the 16:9 vertical ratio.
Enjoy the show!
Ryan
**This pattern is not my original creation. It belongs to @mtmwood who has plans available for purchase through his website.
▶️ Watch Part 1: y2u.be/1eg9t-XpGvI
▶️ Further support this channel
SHOP BOARDS: www.westcoastboards.ca/shop-1
PAYPAL: bit.ly/3NOhbBO
CRYPTO: bit.ly/3u6Zx4s
▶️ Follow
Instagram: / westcoastboards
TikTok: / westcoastboards
▶️ More Unique Builds
3D Patterned Coffee Table
y2u.be/npjxCYLcuFs
From Barrel to Butcher Block
y2u.be/uiu0Hkd6mb0
3D Patterned Cutting Board
y2u.be/Jrh_g79Rzh0
Links to items used in this video:
Freud Glue Line Rip Blade: amzn.to/3iW1gE5
GRR-RIPPER 3D Push Block: amzn.to/3xVopuF
Gravity Heel Kit For GRR-RIPPER: amzn.to/3D08oHI
3M BlueTooth Hearing Protection: amzn.to/2VVVB8v
Silicone Glue Brush Rockler: amzn.to/3yZumrH
Framing Square: amzn.to/3iXIFrn
Metric Tape Measure Stanley: amzn.to/2XvzKox
Juice Groove Router Bit: amzn.to/3zlfhkz
Pipe Clamp ¾” Bessey: amzn.to/3iV9KLL
F-Style clamps Bessey: amzn.to/3k2KhPL
Titebond III Glue: amzn.to/37OE44p
Camera Tripod: amzn.to/2XCxT1q
Sony A6400 4K Camera: amzn.to/3hRPR78
Iphone Tripod Mounting Bracket: amzn.to/3m8pptb
Planer 13” Dewalt: amzn.to/3xVNe9N
Planer Knives: amzn.to/3g7fD6L

Пікірлер: 63

@jbaltz77 2 жыл бұрын

Wow, I admire your patience and persistence getting through all those steps! The boards are amazing!!

@ryanhawkins 2 жыл бұрын

Thank you!

@danafosburgh2775 2 жыл бұрын

Yet another beauty. Based on the length of the videos, and your ability to edit, you could probably get dozens of entertaining shorts, using every keyword known to mankind related to cutting boards. Keep on truckin" !!

@ryanhawkins 2 жыл бұрын

Totally! I‘ve been exploring the “shorts” territory more these days

@danafosburgh2775 2 жыл бұрын

@@ryanhawkins I think the pouring on of the finish, and seeing the grain & pattern come to life is particularly satisfying!!

@ryanhawkins 2 жыл бұрын

@@danafosburgh2775 I was pretty lucky to have some great natural light pouring in that day

@robinfulton9057 2 жыл бұрын

There's a lot of work in those boards, they look great. MTM is the king.

@roberth4190 2 жыл бұрын

Wow, I know what it takes for me to make one board. Can't imagine doing that many all at once. Amazing work!!

@ryanhawkins 2 жыл бұрын

This was a beast of a project for sure.

@Leipieo 2 жыл бұрын

Wow! So many steps, so much dedication and what a great result. Thanks for sharing and keep it up.

@ryanhawkins 2 жыл бұрын

Thank you.🙂

@TheJkaeser 2 жыл бұрын

Amazing video. Amazing cutting boards. Couldn't believe the number of steps involved.

@ryanhawkins 2 жыл бұрын

Lots of work, thanks for watching!

@tknyte 2 жыл бұрын

Was looking forward to part 2. You didn't disappoint. Beautiful boards. :)

@ryanhawkins 2 жыл бұрын

Glad you enjoyed it!

@oneshotme 2 жыл бұрын

They look great and again you did an excellent job making them! Enjoyed your video and I gave it a Thumbs Up

@ryanhawkins 2 жыл бұрын

Thanks so much!

@oneshotme 2 жыл бұрын

@@ryanhawkins You're very welcome!!

@PapaFlammy69 2 жыл бұрын

I've never seen someone cut from behind the table saw before! :D

@ryanhawkins 2 жыл бұрын

It’s a little trick someone recommended to me to square up larger panels using the INCRA miter gauge.

@jonathanhadden8199 2 жыл бұрын

Beautiful work!!

@ryanhawkins 2 жыл бұрын

Thank you very much!

@Powerinvisible Жыл бұрын

Perfect 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏

@jeremiahsmith6103 2 жыл бұрын

Shut up and take my money! Excellent work.

@ryanhawkins 2 жыл бұрын

Appreciate it🙏

@MANJITSINGH-ko2oi 2 жыл бұрын

BEAUTIFUL BEAUTIFUL AND BEAUTIFUL no other words can say anymore. weldone.

@ryanhawkins 2 жыл бұрын

Thank you so much!🙏

@mariushegli 2 жыл бұрын

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

@ryanhawkins 2 жыл бұрын

Thank you 🙂

@cabman86 2 жыл бұрын

After 100 gallons of glue and 10,000 clamps, it came out beautiful!

@ryanhawkins 2 жыл бұрын

Thanks!

@anthonytilly5558 2 жыл бұрын

Those boards are absolutely beautiful... and you do it all with basics which makes it even better... Great work . 👌👌👌Do you sell the plans for that design??

@ryanhawkins 2 жыл бұрын

Thanks so much! I don’t have plans for this one, sorry

@carlosaugustosoutopimentel6779 2 жыл бұрын

Parabéns ficou show de bola 👏👏👏👏 trabalho muito bom mesmo 👏👏👏

@ryanhawkins 2 жыл бұрын

🙏🙏

@danfofi2388 3 ай бұрын

Can I ask what the different wood types are that went into this board? Looks amazing

@nologification 2 жыл бұрын

A-M-A-Z-I-N-G ! ! ! !

@ryanhawkins 2 жыл бұрын

Thanks!

@stormkhan4250 2 жыл бұрын

Love the boards and all the effort into making each one. Looks like you could really really use a drum sander! Save you a load of time sanding all that instead of using that belt sander.

@ryanhawkins 2 жыл бұрын

100% I could use a drum sander!

@mass112594 Жыл бұрын

Dude, those boards are incredible man. I’ve been building boards for almost a year now and want to do some 3D end grain ones. Most definitely going to make a few of these. Do you sell your boards and what do you charge based on size and type (end grain/edge grain)? I can imagine one of those larger ones being north of $500-$600 maybe more. And by the way, I as well would LOVE to have a DRUM SANDER! Must have it. :) does your planer have the regular cutter head or the Shelix? I follow Kris Devo who has a similar finishing process as you do.

@ryanhawkins Жыл бұрын

Just seeing this now Mark! I do sell the boards I make based on size and pattern. I only build end grain. The 16x20 is just over $600. I have the regular cutter head, not the shelix. I also follow Kris, very envious of his set up. All the best to you!

@jojones9194 2 жыл бұрын

The boards look great. Roughly how many hours do you have into these boards?

@ryanhawkins 2 жыл бұрын

The boards themselves probably took a total of 45-50ish hours to do.

@jojones9194 2 жыл бұрын

@@ryanhawkins From rough cut to finish? If so thats great.

@ryanhawkins 2 жыл бұрын

@@jojones9194 That's correct. I've built a lot of these and have the process pretty dialed in.

@michaeldorling49 2 жыл бұрын

Loved the video. Are you a Michel Gondry fan by any chance?

@ryanhawkins 2 жыл бұрын

Thanks, I’m not too familiar with his work other then “Eternal Sunshine…” which I really enjoyed.

@tomnieman6459 2 жыл бұрын

You know there are tons more hobbiest than professionals you could add to your income selling compete cut lists and plans. Think about it.

@marcosaslan1802 2 жыл бұрын

Me imagino que precio tendrán ? Aquí unas tablas de esas de 30cm×35cm normales con diseños menos complicados bordean hasta los $ 50 , 60 dolares , solo porque la madera es media buena , aunque casi aquí no se ve mucho ese tipo de trabajos , Saludos

@jorgemuia3463 Жыл бұрын

Hola estoy facinado con tus cosas , son 4 colores verdad, ayudame a crecer te felicito por tu empeño y gracias por compartirlo con nosotros , saludos desde argentina