Building a $500 Avenger 85 Bike that can go 40mph+! (TY FOR 1K!)

Рет қаралды 2,707

2 ай бұрын

So, I bought the A85 kit from CaliforniaMotorbikes.com. Let's give it a try. Subscribe & Bell for more content like this!
Support: ko-fi.com/breezetix (APPRECIATED!)
Discord: / discord
Motorized Bikes parts: www.amazon.com/hz/wishlist/ls...
Links to parts:
Avenger 85 kit can be bought on californiamotorbikes, or eBay etc.
15x27x5 = www.veryseal.com/product/15x2...
15x27x7 = www.veryseal.com/product/15x2...
I think Ali is cheaper, just may have to wait 2+ weeks
www.aliexpress.us/item/325680...
10 Pack 6202 PGN Bearings: www.amazon.com/gp/product/B08...
If I forgot to link other stuff, let me know
motorized bike, yd100, zeda 100, smolik performance, la hover bikes, fastest motorized bike, fastest motor bike, fast motorized bike, minarelli bicycle, felt faker, felt faker bike, felt faker motorized bike, athena sport, 70cc athena, motorized bike 60mph, motorized bike 50mph
#motorizedbike #moto #motorizedbicycle

Пікірлер: 40

@dustinh4175 Ай бұрын

Who ever decided to make the avenger kit 200 bucks is very smart as they will sell way more and its just a nice thing to do.

@breezetixmoto Ай бұрын

yep

@Roadscore Ай бұрын

I agree. I never really wanted a Phantom 85.But this avenger eighty five kit looks pretty good especially for 2 hundred dollars

@dustinh4175 Ай бұрын

@@Roadscore the poor guys that built the phantom probably went bankrupt over that motor. Using a bushing for the piston was idiotic and I don't know if they figured out the ring problem. These sweet new motors keep coming with stupid exhaust tho.

@breezetixmoto Ай бұрын

@@dustinh4175 the "poor guys" would the china factories, I believe, wanting to squeeze out more money. it took them 3 versions to finally use a proper needle bearing. three versions. They don't bother testing all chinadolls, as well as actually balancing the cranks etc. That's why they're so cheap. That's just my speculation though.

@justanothermotorizedbikech5138 Ай бұрын

Nice bro!! The second smaller spring for the clutch wire is so it keep pressure on the arm so your bucking bar, ball and pin that holds the arm locked in lasting a lot longer

@R_Kyllonen Ай бұрын

Great video bud. Keep em’ coming

@sasquatch_886 Ай бұрын

Want to get one of those bad boys soon lol. Quick tip with spray painting the frame, I recommend in the future to sand down the frame say use 120 grit. Gives texture for the paint to bite, but use primer first. Paint multiple light coats take your time and just finish what you miss in the next coat so you don't drip. Use a clear coat last, any sheen doesn't matter. Just to give it a nice long lasting and pretty paint job

@breezetixmoto Ай бұрын

gotcha

@Littleevil9975 Ай бұрын

Good video bro great motor

@SuperTrikeBicycle. Ай бұрын

Cool video bro

@ExpediteTravels Ай бұрын

I just got my felt faker and Avenger build put together I'm waiting on one of those engine mounted chain tensioners to show up because I keep popping chains off either. The chain is too tight or it's too loose and I did take 6 lengths out of it. I believe I'm running a 36 tooth sprocket on the back.

@breezetixmoto Ай бұрын

Adjust the wheel axle position as well as motor. A little loose is fine like an inch up and down of slack

@sebas5688654 Ай бұрын

I wanna to see how you will travel on the moped!

@keeganhache6667 Ай бұрын

Let’s goooooo also here’s a tip use a rubber mallet on the clutch shaft and put the nut back on the shaft before tapping it out hood video

@leonardarola Ай бұрын

Loved it. Teck Talk. To the point. Thanks for sharing.

@mikemiller3303 Ай бұрын

Cool beans brother I know you liked the power lol I have a phantom 85 version 2 none of them issues you described but I changed a lot of the parts to sthil 52mm 044ms440 big bore piston and rings and 10mm pin bearing 1085 miles so far so good be safe brother I like the avenger 85 as well

@breezetixmoto Ай бұрын

nah, it was actually weak tbh. Boring. It does have a nice pull that's all I gotta say, from dead stop ish. I'm on 36T btw. It only topped out like 6500-7000 rpm ish. (up to 36mph) (Still breaking in). I'll be doing upgrades and mods to it then it should scream

@RustyShakleford1 Ай бұрын

@@breezetixmotois it better than a minarelli?

@breezetixmoto Ай бұрын

@@RustyShakleford1 No. Minarellis are more powerful unported than stock a85

@jasonburque Ай бұрын

Just got the LD head

@alrums Ай бұрын

About time

@JulianJaimez-eb2jo Ай бұрын

So i ordered the avenger 85cc from go max industries i also ordered a olyin cnc head and a dio reed valve im thinking of ordering a pwk 24 and a nitrous bottle 🍼 just for the boost im a big boy 240 pounds

@breezetixmoto Ай бұрын

pwk24 seems too excessive. A nibbi 19 or pwk21 will do

@lauraiss1027 Ай бұрын

15:34 hehe

@makzy69 Ай бұрын

nice video bro

@dustinh4175 Ай бұрын

I ordered a 110 iron sleeve before I found out they suck and the company sent my a yd100 with the 12mm piston pin and refunded me 60 bucks so I got the whole kit for 60. I think an avenger top end will work with the yd bottom end so I'm gonna try it

@breezetixmoto Ай бұрын

the 110 bottomend will be perfect for hybrids. Like, larger saw cylinders, big iron minarellis/jogs, etc. That's all. The transfer ports on the case are perfect. Just that the 110 cylinder is awful from what I've read/heard.

@justincase4339 Ай бұрын

Sorry but I don't know where you buying your p85 from because they only run $230 lol good one though

@breezetixmoto Ай бұрын

wdym? I never bought p85 in my life. Bicycle engines sell it for $300 on sale.

@4514rooster Ай бұрын

👍

@mello3799 Ай бұрын

hey when installing the stator/magneto, do you put the top part of it closer to the magnet? im having alot of problems with mine

@DirectCurrent4u 14 күн бұрын

@mello3799 Put 3 pieces of paper around the magnet and tighten it down to keep it centered and your good to go.

@davidzelik6579 Ай бұрын

Very nice videos, keep it coming. What power mods woud you recommend for my 80cc engine? I have hikone 216 exhaust, pwk 21 carburetor, g2 reeds, ported cylinder ( exhaust, intake trench). I am 17 from Czech republic. If there are any good cheap cylinders, what you'd you recommend? Thanks from Central Europe😉

@breezetixmoto Ай бұрын

If you want more power and all your upgrades/mods aren't cutting it, I'd get an iron minarelli (a whole motor kit for $200 on cmb) or just swap the cylinder with an athena sport for $170 on amazon (look up athena 070100), needs to be 45mm stud spacing and the stud holes need to be drilled wide to fit 8mm studs (unless yours is 6mm)