No video
Building A Bass Neck - Damas Bass Build Part 1 of 3
Рет қаралды 1,337
Күн бұрынPlease don't forget to subscribe and follow me on social media :
Instagram: / baradaguitars
Tiktok: / baradaguitars
Facebook: / baradaguitars
Twitter: / baradaguitars
Angle Grinder and Spindle Are fromAMB-Elektrik:
www.amb-elektr...
Opti D23 Pro Drill Press: shorturl.at/hAEK3
Barada ®
Handcrafted Guitars
#baradaguitars #handcrafted #guitar #woodworking #wood #handmade #woodwork #woodworker #diy #woodart #design #interiordesign #art #furniture #homedecor #carpentry #wooddesign #woodcraft #woodshop #woodcarving #handcrafted #carpenter #maker #furnituredesign #woodturning #interior #custom #makersgonnamake #workshop #home #woodworkersofinstagram #decor #bhfyp
@sonidofree5476 18 күн бұрын
Master
@BaradaGuitars 18 күн бұрын
Thank you!
@johnstitt2615 7 ай бұрын
You again......torturing us with dead sexy basses or guitars. Do continue. 🤣👌🎸✌️😎
@MixingGBP 7 ай бұрын
I always worry about the truss rod rattling inside the neck after gluing the fretboard on and before tightening the truss rod. How do you make sure yours do not rattle. I guess it can probably be silenced by tightening it and putting on the strings, but still.
@aether_antares7761 7 ай бұрын
By putting a dap of silicone coulk on the trussrods end.
@MixingGBP 7 ай бұрын
@@aether_antares7761 On my first one, I did put a few dabs (probably not enough), but it still rattles without string tension. I cut the slot width perfectly, but I think I was just a hair too deep due to the end blocks not being flush. On the next build, I'll put more and also a thin strip of hardwood over the truss rod before gluing.
@antonincolomb 7 ай бұрын
Very nice job, thank you for sharing your work. Do you think all the process is optimized or could it be improved ? For example, machining the fretboard after having it glued on the neck ?
@MixingGBP 7 ай бұрын
I was wondering about that too. Some builders can do this because they have experience and know what needs precision attention and what does not. I used toothpicks to align my fret slots to the neck centerline precisely and then routed the outside of the board like you said.
Danny Lewis
Рет қаралды 642 М.