No video
Building A Custom Though-neck 7 String (Part 3)
Рет қаралды 2,505
Күн бұрынFollow me on facebook and Instagram
Facebook: Shuttlewood Guitars
Instagram: @shuttlewood_guitars
specs:
27" scale length
5 piece maple and mahogany through-neck construction,
black limba wings,
flamed maple top,
ebony fretboard,
evo gold medium jumbo fret wire,
spoke wheel truss rod with 2 graphite stiffening rods,
Seymour Duncan Pegasus pickup,
gotoh locking tuners,
recessed tune'o'matic bridge with though-body stringing,
graphite nut,
Winspear Instrumental Company 13-80 strings,
stained with Crimson Guitars stunning stain.
@Murf_Workshop 2 жыл бұрын
Dude! clean work! I'm getting ready to build and paint a superstrat body and this video series is pretty inspiring! Makes me want to made a laminated 5 piece like yours after my next project.
@r7bishop421 3 ай бұрын
Hi man, beautiful work! I'm working on a similar shape for the arm and belly chamfer and I don't know how thick the part in between needs to be, how thick was it on this project ?
@shuttlewoodguitars966 3 ай бұрын
it all depends on the look you want. i wanted it quite thin so i think its about 10-15mm
@veedubbayou 8 ай бұрын
Clean work! What are you using to dye the top?
@shuttlewoodguitars966 7 ай бұрын
crimson guitars stunning stain
@Ray_Getard42069 Жыл бұрын
How do you make sure that the bridge is at the same height/angle as the run of the neck?
@shuttlewoodguitars966 Жыл бұрын
i draw all my builds out by hand at a 1:1 scale to work out every angle
@longhuang5613 7 ай бұрын
The Through neck+body can make the line on a horizontal line,The height of the bridge is Fingerboard thickness+Height of the fret+2mm(max).
Friendeez
Рет қаралды 20 МЛН
Фани Хани
Рет қаралды 1,8 МЛН
NOT A LUTHIER
Рет қаралды 4,7 М.
Diesel Creek
Рет қаралды 517 М.
Richard Raffan
Рет қаралды 311
Friendeez
Рет қаралды 20 МЛН