Peak youtube engineering. Next you should make a flight sim.

this is peak engineering.

The 40 bucks for a used non force feedback wheel sounds real worth it compared to the mental suffering the building would cause

Budget racing sim on midnight racing tokyo is funny asf

“Tako_balls™ made this in a cave…. With a shit load of cardboard!”

If hell had an accurate representation it would be playing iracing on this setup.

bro casually built a functioning racing setup , awesome dude !

Absolute Cinema

Aa a fellow bootlegger, I approve. I have actual equipment lol. But, I use my wheel as a throttle in flightsim, and I bought a 5$ broken stick back in 2019 and cut the spring, replaced the sensor with an idential one I found in another broken flightsim thing I had (it literally just plugged in), and to this day, I just use rubber bands for the return to center action. For the longest time too, I had been using a bottlecap and a hair tie to keep the wire in my PS4 controller. Over the years I can remember tinkering around with all sorts of crap for gaming, but I can't even remember half of what I did. Being poor, actually gives you a surprising amount to do, as it turns out.

i’ve done this before, i have a theoretical solution for the misalignment of the wheel, instead of using an optical mouse you could use a trackball mouse because it makes physical contact with the pipe. Or you could go a more expensive and complicated route and get a rotary encoder or potentiometer and connect it to an arduino board. For the Caster return u can connect a spring to the pipe. so when u turn it either way it’s gonna recenter, the stiffer the spring the faster it returns. keep it up

Back when I started sim racing, I used to try and build my own steering wheel and it worked for a while until I got fed up with the wheel not recalibrating to the centre. What you did with the programming honestly would've made me happy back then. The pedals were quite cool to see since you added springs while I just placed my keyboard on the floor and just the keys with my bare foot. I tried making a shifter but I couldn't find a way to implement it smoothly and abandoned the idea. After a while, I finally got myself a T300RS and the quality is definitely better and it was definitely worth it. Low budget sim racing builds will always have a place in my heart

The comedy, editing, creativity, the determination to create something out of nothing and have it work is quite impressive. SUBSCRIBED!

Bro I just have to say that you have finally found the words none of us have been able to put together. The age old question all of us get "why do you do this? why don't you do it for real?" Your answer was fucking mint xD

the editing is actually crazy good nice video bro

Why is bro underrated like bro I didn't even know you could do this also u got w drifting skill

How the fuck does this video not have more views, this is peak KZfaq engineering and very educated and intelligent humour. Awesome video

lmao That jerma jumpscare made me spill water all over.

incredible depth, your research really shows in your videos!

This is peak level content editing, loved the entire video!

i actually love this video so much the comedy is peak, and i wonder why this doesnt have millions of views

bruh this guy is on another league sorry for breathing the same air as you u will be famous soon man keep up :)

i love that ur playing mrt one of my fav roblox games lol ( because i spent too much time on it)

Peak KZfaq entertainment haha! Great work :)

idk if its because i'm watching this at 2am or what, but this was freaking hilarious

"I can't explain it, I'm driving better while drunk." Is the realest quote ever.

Gonna make a flight sim rig using Lego Technic now, thanks for the idea!

Bro you got me dying 💀

Great video! A while back I made my own handbrake from a micro switch from an old microwave and a pcb board from an old keyboard. I soldered it together and mapped the button to a key on the keyboard and assembled it on a handbrake i bought from online for 15. It worked great for a few months but proved un reliable as i had to re-solder it multiple times. I recently bought a used usb handbrake. Im planning on making a sequential shifter with the same switches and my old handbrake. Im using an arcade usb encoder this time instead of a pcb board and its proving to be much better. If you plan on making a 3rd DIY sim setup I would highly recommend doing this way. If anyone wants to get into sim racing I would really recommend used. I bought my sim setup which included a Thrusmaster T300RS, T8HA shifter, T3PA pedals and a sim cockpit for 350. Also I got a triple monitor setup for free just because someone was going to throw it out anyways. So you can get some good deals if you look. Loved the video Asian Micheal Reeves. I would post the links i used to build the handbrake and shifter but youtube isn't letting me post the link or title.

this is incredible bro😭😭😭 pls keep ts up

my new favorite sim rig out there

Keep it up bro this is peak content 🙏🙏 ngl I'd do this if I had a smidge of intelligence but imma just buy a g29 lmao

i thought ur gonna rack and pinion the mouse, but seeing what you did youre clearly universes ahead of my puny 5minutecraft brain, hats off to you

Bro your editing is so cursed, it’s incredibly good.

I throught you had atleast 1mil, you underated all love man.

Peak editing, commentary, and everything else 😂

yeah dude. your channel is gonna be huge. first time watching. this was great!!

this got in my reccomended, peak simracing rig right there.

I will never complain about my setup again after seeing this

I just finished completing my aluminum profile rig and simucube wheel base, should’ve built something like this honestly.

Anything hand-made is love-made. It's beautiful.

Props to someone actually using MR:T as footage.

in 48 second you made me die of laughter. Just for that here is my sub

found this randomly, great content and big props cuz those wheels set ups are stupid expensive for a good one

Damn bro this genius, instead of buying a cheap wheel I'll just buy 15 keyboards and destroy everything in my house, thanks for the tips!

This is perfection. Next is "building a fully working porsche 911 that runs on hopes and dreams"

10/10 video, passion, fun, creativity, you have a new follower sir

7:57 blud just leaving the clutch was insane 💀

how it only has a thousand views? I watched the whole video and had a great time, keep it up and you will go far!

no way its the funny roblox racing game by the devs of the gem!!111!!! (seriously great video, keep it up. im sure youll pop off in the future with your unique editing style)

Mom can we buy a sim racing setup? Mom: we already have a setup The setup at home:

will be using this method to make my very own handbrake

Bro's rocking a triple monitor setup but can't afford a simple Sim wheel and pedals for 50 bucks? Huh?😂

Dude, I'm not joking, but my first sim racing rig was actually from an old xbox controller and lego technic pieces, and I used a gear rack piece to connect to the joystick and connected it to a shaft and gear to make the steering wheel shaft, and it actually worked really well, and it had pedals by connecting string from the buttons on the controller

Its a funky looking yeeyee ahh setup but this is nasa engineering😂

This guy deserves more subs, this is a great video

best set up ive seen

This is impressive and I’m not trying to discredit you but you can get a really good used entry level for like 70 bucks. That’s definitely worth it in my opinion

the jschlatt guy budget racing on a ROBLOX GAME is WILD

ngl this is very creative

Honestly, like no shit. I think these DIY racing setups are much much more impressive than those 1000$+ setups. It requires more skill to do something like that than building a 1000$ setup.

Heh, i made one 2 years ago. Everything was made out of lego and wheel used a mouse, pedals used a controller and shifter + handbrake used a keyboard. Surprisingly it was not as flimsy a tou might think, it didn't even brake when i let my friend drive with it.

i love that you are watching isaccwhy (im assuming) while making a driving sim that looks like a IED

Very Well done!!!🎉

Somebody get this man a case of beers and car keys!

most entertaining video I've watched in a while you deserve way more attention

I just found your channel and your editing is lowkey hilarious I can tell a lot of effort got put into this video. keep it up

bro you're gonna grow hell if you keep up the memes and quality

THANK YOU SO MUCH BRO THE ONLY ISSUE I FACED WAS THE MOUSE OVERSTEER THANK YOU SO MUCH MAN'

MRT is wild, I loved racing the r-34 with the foxbody. It's ashame that they nerfed it again 😢

Yo the plarail set stering wheal is crazy man

As a MRT player, this video is literally the banter we get up to.

HOPES AND DREAMS MENTIONED 🗣️🗣️🗣️

Great video and funny too! I also have a sim driving setup mostly made out of cardboard. But i suggest you use cardboard for the steering wheel, it might be a little harder to make but it will feel better and more durable

This is one of the videos of all time

Midnight racing Tokyo mentioned🗣️🔥🔥🔥

The funny thing is, with about this much effort and about 400 bucks you could buy a used wheel, pedal, and shifter setup off eBay, buy a car seat from a junkyard, and you build a wood frame for it, you have a really good budget setup for fairly cheap.

Good Job my guy, you are fucking underrated.

U could use the wooting keyboard that has like these pressure sensitive switches

Now what you need is budget vr. Using your phone and vrbox to play pcvr games.

This was an amazing video im surprised by your creativity

u shd use ur clutch, overall amazing video

maybe try messing with a controller so u can get some type of variability on the pedals and a spring effect from the joystick to bring the steering wheel back to place for that tiny amount forcefeedback

This gives old michael reeves vibes, love it.

who let this man cook?

Hilarious bro 😭😭😭😭

Is this what they call, engineer gaming?

I remember doing the steering wheel with cardboard and one of those wheel covers I got from like autozone. Also a fellow MR:T enjoyer I see.

Bro made a Nintendo Labo wheel on his own 💀

Now you gotta make a 3d printed version with a controller. For real, this was amazing level of crackhead engineering.

Any marketplace steals go crazy though I got my sim settup for 110 with a thrustmaster 7 speed and there like low mid yit pedal and wheel setup

you should try incorperating an old cheap controller into the design if you make a v3, that way you can use pressure and not always full send it

i was expecting controllers triggers for analog control but still, amazing dedication

PLEASE do this again but with 2 cheap controllers so you can make a better throttle and brake that gradually goes from 0 to 100

he looks like tim henson if tim henson decided he didnt want tattoos

bro is gonna steal all the girls with this setup, leave some for the rest man T^T

in fact there are some analog keyboards (that have more than two states) but they probably cost a liver and a lung

Bro cant afford steering wheel for 2k but he has apple keyboard for same price. XD But this is porsche level engineering.

bro is underrated

U earned a sub

underated youtuber frfr