It's a joy to watch your videos Benni..You make everything look so easy, thank you again.

What a wonderfully inspiring video!!first let me tell you your video editing is excellent!.in have watched this video several times now! The footprint is very elegant and strong!I am a gardener and land owner. When I saw this video I said what a great thing!so today after after 5 hours today and 5 hours yesterday i made a jig .ripped 1x4s 12 feet long in half on the table saw.then spent those ten hours building these beautiful curved gothic beams!!!thanks very much for posting this video. I do have 10 full beams at 12 foot beams.!!!i am.making another 20 this weekend. Making them is addictive. Lol.thanks very much from one grateful gardener to another:)

Nice work. I am told those are a lot stronger than bending steel hoops. Been wanting to put one up for a while now. ThX for posting.

that greenhouse came out great. You did a great job. The video was very helpful. Thank you for posting.

Terrific and imaginative design. Well done!

Looks incredible, thanks for sharing this!

Hahaha! Faster Benni, Faster! Thank's for producing a fun and informative video.

IT´S A FANTASTIC PROYECT, CONGRATULATIONS.....

well done benni, looks great!

Hey Benni, great project. I am very interested to read more about your experiences after two years. Are you still happy with your construction?

Lot of smart ideas in this build, thanks a lot for sharing.

I have one made of strappings spruce - as long as its covered by plastic and doesnt get wet - its fine. you can also paint it to seal or varnish the arches before setup. its gone thru 4 ice storms and still standing. using the strings to go over the plastic are a must - but I wouldnt advice to add screws onto the middle sections of the plastic as water will eventually leak onto the structure.

Nice one .great bit of ingenuity

Hi Benni! Loved the speed! Looks like me when my blood sugar is out of whack. I was wondering: Would it be possible to do one side and attach to soffit area of my roof as a permanent sunroom? If so, any ideas on what burglar proof clear material to skin it with? Also, can you do a vid on how to make the jig for bending the boards while you work on them?

enjoyable a GREAT build. Thanks

Really nice job !

Good Job Benni!

A couple of points I'd like to make CONSTRUCTIVELY : If your arches had a longer fixing point onto the wooden base beam, you could then after putting on the plastic, LIFT up the arches with a jack or a lever, and fix them at the higher setting thereby stretching the plastic tight. The plastic could also be either wrapped round a piece of wood and the whole thing fixed to the base beam, OR you could dig a trench along the outside and bury the plastic, using the weight of the soil to hold the plastic tight . Tim Jones' comment on pressure treated wood does have a point. I would AT ALL COSTS avoid penetrating the plastic membrane. When you have a stretched membrane and then pierce it, what happens? Lastly, I must congratulate you in your video making skills. No language barrier, No nonsense, no repetition, and logical sequence. keep up the good work!

Nice like the shape

Looking great my friend! I look forward to seeing more from this greenhouse. I love all of mine! I subbed! Chuck

Great video! I would like to build such a greenhouse, too. What kind of wood did you use? Did you prepare it anyhow in advance? Thanks and kind regards!

Wow that's impressive 😀

This looks like a nice project. How did hold up after many years? Also do you regret not using treated wood?

Hola, te saludo desde Bogota colombia, te agradezco por está idea tan brillante, trabajaré en un proyecto así, bueno algo más pequeño pero sin dudas pensaré en tu resultado para inspirarme!

Awesome!

Hi,I would love to see the plans for the gothic arch greenhouse?

Could you maybe show a short update on how it looks now?

Good job bro..

i'm pretty clueless re growing things (and thus greenhouses) - is the point of the rubber to protect the wood / to stop pests getting in / to keep moisture in / all of the above?

Waw. So skilled.

Nice!!

Excellent!

I have shrink wrapping equipment. I want to build one of these buildings, cover it with the shrink wrap and then put the heat to it. I covered a carport with the wrap and it has lasted 5 years to date. That stuff is very strong.

ship ribs system^^

OTTIMO lavoro e OTTIMO canale 👍👍👍 👋👋👋👋👋👋👋

Richtig tolles Gewächshaus. Super Edel. Aber eigentlich schade das du es dann mit Folie verkleidet hast.

Hi, I watched your video. I would like to know how much wood you used and how many pieces of wood you cu

So, how has it held up?

That’s a stunning build 👏👍

It is important to buy UV resistant plastic, greenhouse supply.

На месте не сидишь, молодец.

I'm surprised you did not double the plastic sheet, one outside, one inside for insulation.

what was the length and width of your green house? nice job.

Good Bon travail

Seems like it's one time use green house. But a nice one.

What are the advantages/disadvantages of an arch over a the polytunnel type?

👍

Do you have plans / drawings for the structure?

Люди, надо парню скинуться на степлер и на древесную пропитку!😉

How does this greenhouse look today? is it holding up? Chuck

hello . How is the wood work after all these years ?

Has anyone tried this for a round house? It seems like a good fit.

Very nice video, but it left me with some questions. What are the dimensions at the base and how high is it in the center? How long were your side strips and how far apart were your forms. I have been thinking of building a greenhouse and have spent a lot of time looking at different plans. Do you by chance have more detailed drawings or plans? Out of all that I have looked at yours appears to be more size that I want.

What kind of circular saw is that!!! I want I need!

Not sure how you did the ridge?

Do you happen to have the cost of what you spent to build this?

Perfeito

Нижний пояс можно было бы обжечь, тогда не будет гнить...

塑料薄膜固定螺丝容易松脱

Да сделано аккуратно. Но зачем закапывать доску в землю без обработки?

По низу теплицы лучше полосы профлиста вкопать. Доска быстро сгниет.

Nice greenhouse. Should be well on its way to rot in these three years.

Where is part 3

the base of the greenhouse had to be smeared with used engine oil

Для того чтобы не гнили доски, которые в земле, растапливается парафин и пропитывается им доска.

Without being pressure treated it won't last 3 years

no lo hiciste como yo espera y tengo la certeza de que mi metodo es el correctooooooooooooooooooooo pd:

Stepler

Lovely production and form but... so many weak details and so much unnecessary work: The edges of plastic sheets are weak and need to be held down continuously so they don't flap - point fixings like those will tear in no time. I'll be surprised if the tiny 'tab' you left at the bottom of the rafters and used to fix rafters to the rails will do it's job in a strong wind. You could easily have left the tab longer and got a really good attachment. Why on earth set the concrete bases so high? - if you'd set them lower you'd have been finished after fixing the the rails and saved having to infill with all those pieces - if you deliberately raised the rails to prevent rot and used the lower pieces as sacrificial 'blocking' that you know will rot and get replaced, why not just overlap rails and save yourself a bunch of metal work and fitting between. Ya, lovely to watch but...

A lot of questions to author ...... And no answers.

!!!!!!!!

Ничем не защищаешь доски и стоять этой теплице 3 года. Потом новую строить будешь

Есть тут русскоязычный народ?

Привет Бенни. А ты сделал пропитку антисептиком деревянных конструкций от гнили и плесени?

Низ сгниет