Some information. Trusses, metal, screws, ridge cap came from Jackson Metal Roofing Supply in Forsyth, Ga. About 40 miles from building site. Howard has worked for me for 15+ years. He is like family. He starts chemo AND radiation late next week, so pray for him. When Howard knew he was going to be out some, he recommended Larry, who has turned out to be another good’un. Richard works for my brother on his cattle farm and we borrowed him for a few days. Howard started helping Wes on off days a few years back. A little background: Wes’s grandmother taught me in high school 60 years ago. Our families have interacted for at least that many years. I believe this is the 4th video Wes has done on our place. Two on Felling and Milling Pines, building a Homestead Shelter, and this one. Yes, the metal screws had washers. Yes, we are going to put diagonal bracing on the building next week. Wes can pin this if he sees fit.

Neighbors helping neighbors. Good way to build community.

Really enjoyed the video. Sure was good to see Howard again and nice to meet Larry and Richard. Looks like Howard knew what this job was going to entail so he brought reinforcements. He figured he was going to need all the help he could get to keep you in line 😂🤣😂🤣😂🤣😂🤣😂🤣. Stay safe, GOD BLESS and see ya on the next one.

Nice job. Good to see Howard again. Getting the trusses up in place looked like a challenge. Will be a nice shed when he gets it complete. Thanks for bringing us along.

It looks great!! Back in 2014 my husband was building a Gazebo in my back yard. Our daughter wanted to be married under it. In the middle of it all he had to have surgery on his left thumb joint to stabilize the joint thanks to R.A. The next day he was back to building that gazebo, hand in cast and all. You remind me of him. He always built anything needed around here, was willing to do anything for our friends. Just rarely asked for help. Don't do that please, ask for it when you need it.

A tip from a boy scout. In building several outdoor shelters,, think roof, trusses, shingles supported by 6X6s,,, Not unlike your structure at all. I just build them with no walls. Ya wanna make them extremely stable? Spread the legs. If the exact truss length is 24',, and the exact building top plate length is 50 feet Then position the base of your 6X6 columns each one or two inches wider in both length and width. An inch in increase will have the column bases exactly 24'2" X 50' 2" A two inch out of plumb will increase the spread of the bottom to 24' 4" X 50' 4" The increase in stability in a wind is startling. A one inch out of plumb is undetectable. A two inch out of plumb can only be seen by a well trained eye in a 9 or 10 foot to top of plate tall structure.

Hat's off to Howard, Larry, and Richard again, tell 'em Ron says, "Hi." They're handier than a 2-pocket shirt. That was an incredible video. Thanks so much for creating it. Hope your finger heals quickly.

When you are pulling the sheets of steel up onto the roof, clamp a pair of vise grips to the end. That gives you a good grip and is safer.

Excellent work 👍👍👍 . Thank you for sharing. Take care of yourselves 🇨🇦

The shed project looks good. Definitely like to see it finished. I be praying for Howard.

Greetings and blessings to Howard...always great to see him!

Great job my friend. You and your helpers did an awesome job. I agree with you as far as bracing the structure more.

Few KZfaqrs are conscientious enough to show respect for the sound track and music that (usually) enhances their channel. I checked out Gabriel Lewis' music thanks to your calling attention to this fine artist. Methodical melody leading up to a great conclusion. And a great shed too!

Sir, hands down, you are one hard working man. As I watch your videos I begin to wonder if there is something you can’t do! Wish you the best that life can offer. Be safe!

13:07 😳🤣 Pretty sketchy build there Wes. But like you said, no one got hurt. 😁 Love watching friends getting together to help each other out. God bless you all. Said a prayer for Howard. Great video. Thank you Wes. 👍

Great build Wes. Thanks for sharing.

The perfect neighborhood helping neighborhood. Looking forward to the next videos. Keep it up.

Neighbors helping neighbors. That is one of the things that makes American great

"If there's anything I can say to help, just let me know." gold, love it

It’s awesome to see Howard back he brightens up the videos that’s for sure

"If there's anything I can 'say' to help..." 😅😅🤣 I'm stealing that one!

Great neighborly help. You all have some really red clay/dirt there.

What a nice-looking shelter. You got some good-looking, hard-working men putting it up!

Nice job! Turned out real nice! Congratulations

Awesome collaboration you guys smashed it

Good job, good video and nice to see Howard again.

Looking forward to living in my dream house! Thank you, Ryan's, for not only the initial support with your special but ongoing support through my build! kzfaq.infoUgkxe81Bz076USDt6sYU1rDcNa2LwCIKADgB Experience has been amazing so far! Made the process easy.

I smiled at the gauze wrap. Great video

Nice job. You guys work well together. Workin high is stressfull. You handle it well.

Good crew makes work fun and safe. Nicely done.

Great video. The shed looks great.

Good job. Praying your finger gets better. Blessings.❤

Always good to see Howard showing everyone how it’s done

Good looking shade and shed. Wish I had one for my sawmill.

Outstanding job!!!

That's why this channel is growing like a weed - great content, well presented and love the music. Plus it turned out to be a fantastic shed ... even if some of the techniques wasn't OSHA approved. Thanks Wes and stay safe.

The right tool for the job.. makes work easier and fast. VERY obvious that this isn't the first building you've put up... tractor bucket to stand up the posts.. Good looking building!

Good job. It's always a proud moment seeing real men at work.

It was so nice to see Mr. Howard again. 😊 "Hiya Mr. Richard", and "Howdy Mr. Larry!" 🙋🏽‍♀️

Great job, and nice to meet your team.

Great looking shelter.

Great video and channel Wes! I think those fellas liked it when you introduced them and told them to wave! You all made a good team! Take care.

Very nice! I love building things, this is very cool!

I love seeing all those ‘Young’ men (My age) out there helping you. I wish I could have been there.

Great Job , the music is awesome. keep up the great work.

Good crew, good job 👍🏻 👏🏻

Love your videos! Each and every one of them. This prefab steel trusses makes life easier it seems.

Good to see Howard 😁

What a nice structure 😊

Wow, great work 😊

Another great build. From the opening shot of the trusty ol Craftsman toolbox to the great music. Thanks for sharing with us.

Great video! That's what I need.

Looks great. Hard work.

Nice to see Howard again. Especially since he's runnin' the machine.

Real nice job 👏👏 looks real nice 🙂

At 12:28, I knew that was you! My man, Mr. "If there's anything I can say to help". You made my day again, thank you brother!

Great job..well done

Well done!

These engineered trusses are just flat awesomeness minimal waste huge time saver. Am thinking I want concrete piers just to make it easy on me. Great build guys

Nice looking shed, I was wondering about your finger. Thanks for the explanation. Some great drone shots.

This was a fantastic video!! From the build to the satire, music and editing!! Great content; I hope you reach over a million views on this! Great stuff! 👍🏻

Great video and full of detail someone might need for tackling the project. Only comment (corrective in nature) would be the screw placement. The screws should not be out in the middle of each 12" section but about an inch left of each rib. This way the last screw on each panel is very close to the seam and helps prevent it from lifting in high winds. Also the top and bottom edges should have double screws as that is where the lift starts.... Just a little more durable in high winds and the way you see it commercially. Thanks for the great video...

good video and job i may get shed like that. i used to be able work walk beams when i was young. really nice job. take care, be safe and well.

High class shed with all new parts! I am going to assume that this was a gratis job for someone at church... Bless all yalls'

I built a 24x24 out of steel and I learned that you should put the side pannels up first because that roof gets very shakey. I am glad you had friends and a tractor I did not.

HARD WORKING CREW .HOPE YOU FED THEM WELL

Nice work mate!

I had wondered about Howard. Good to see he is healthy and active.

Nice building. I enjoyed watching all the hard work. I was concerned about safety in the work area. Glad no one was hurt. The other thing I noticed was the location of screws holding the sheet metal down. Screws should be put on top of the ridge not on the flat area. I hope the roof does not leak, lots of hard work.

I liked the hoist you was using to raise the trusses. Not sketchy at all if well secured to the trailer. Roofs do get hot cause it's closer to the sun. Maybe it's God's reminder of what can happen if you don't act right!

(That Boom) was the OSHA guy’s head exploding‼️😂😂😂 Hey, what happens on the farm, stays on the farm‼️🤣🤣🤣 🙋‍♀️🇨🇱

Great content 😁

Living in a place where there's a lot of glacial till I'm envious of how easy that auguring looked.

Wow the tune is awesome

Sure makes putting on a roof so much easier with those trusses and beams!!!!

Que interesante como trabajan , felicitaciones desde argentina.

Love the sound track

Very cool> Glad you didn't slice your flinger on that sheathing. It would be a long time healing. Stay safe.

A step latter attached with baling wire to the pallets greatly increases your height range. Healing fast means the blood is down to just oozing when its bent LOL . Good video you would bee a great neighbor.

Next time take a propane torch and burn the lower part of the post it will prevent rotting !!!💪💪💪💪💪💪

Hey....."If there is anything I can say to help....just let me know". Just Love it! 🤣🤣🤣

Excited to see the house fully remodeled!

My kind of guy. Reminds me of my youth.

this why i want a country man. hard working and 🤩

gostei bastante desse vídeo,amo assistir.. um abraço daqui do Brasil 🇧🇷

Real nice shed

Wow love the iron trused

very good jod. congratulations.

That is a nice truss system

Job well done

Son, that looked like a good old fashioned midwest barn raising with more than a little Southern flair. But, when you got up on top without a safety harness you worried me a bit because that's a looooooong way down if you slip, and slips happen to the best of us from time to time. Looks really good at the end of the day.

very good job

Even if it was red soil, I wish you had put water in it and compressed the poles with small stones or used quick-hardening mortar, but the background music explains everything :) Will Harrison was Baptized and Buried...regards. ..

@ 3:07 Did you hear that loud boom? lol I was gonna comment that this would make a good OSHA video... I'm glad I found this I got some answers as to how I was going to set my trusses on my bark kit

Vary good job

hello fall line ridge its is randy and i like and i like yours video is cool thanks friends randy

Congratulations to the team on a job well done. I have a small question, why don't you guys fix it higher than the ground, to avoid moisture damage to the base..cast a block of concrete?

Nice!

Nice video

Thanks for the information. How was the cost when compared to wood trusses? I like the steel trusses but sure the are more expensive.