Building a LINE ARRAY Column Speaker- by SoundBlab

Рет қаралды 667,487

2 жыл бұрын

- The first 1,000 people to use this link will get a 1 month free trial of Skillshare: skl.sh/soundblab10211
Let me explain what a line array speaker is. It is essentially an array of drivers closely arranged in a vertical row. My design is probably more of a mini-line array, since I only have 5 small 2 inch drivers in the array, but it is an array none the less. The aim is to have something that will still have a reasonable footprint and can fit into the average lounge. The array column also has a rear firing tweeter mounted in the back. This allows us to fill in the typical high frequency drop of the array, but also gives us some ambient presence. Of course five 2 inch drivers will not produce much bass under 200Hz, and thus the array is supported by a subwoofer as part of the overall design. In this case the subwoofer is a project I featured in a previous project video: • Building a Small Passi... . The woofer is a 6.5 inch driver by Tang Band, and two 8 inch passive radiators.
►BUILD PLANS: soundblab.net/product/line-ar...
Join this channel to get access to perks:
- / @soundblab
OR
- Become a Patron - / soundblab
Support SoundBlab:
- Subscribe to my channel - goo.gl/EWMSXV
- SoundBlab Website and Build Plans - www.soundblab.net
Follow me:
- Instagram: / soundblab
- Pinterest: / soundblab
- Twitter: / soundblabs
►PARTS:
- 6m (20 foot) of speaker wire (14 AWG) - (US) parts-express.sjv.io/e4yRJz , (EU) bit.ly/39erRI4
- Dayton Audio ND20FB-4 Rear-Mount 3/4" Soft Dome Neodymium Tweeter - (US) parts-express.sjv.io/JreqX2 , (EU) bit.ly/3D8zHib
- Dayton Audio DMA58-8 2” Dual Magnet Aluminum Cone Full-Range Driver 8 Ohm - (US) parts-express.sjv.io/e4yRG6 , (EU) bit.ly/3DfoMmC
- Tang Band W6-1139SIF 6.5 inch Subwoofer Driver - (US) parts-express.sjv.io/LPADrM , (EU) bit.ly/3xcx4bI
- Dayton Audio DSA215-PR 8" Designer Series Aluminum Cone Passive Radiator - (US) parts-express.sjv.io/Xx01jG , (EU) bit.ly/2UVva2b
- Self-adhesive Felt or Rubber Feet - (Amazon) amzn.to/2XVQaXw , (EU) bit.ly/3kB56SL
- 1m (4 foot) 25mm (or 1 inch) Aluminium Round Tube - (US) bit.ly/3mqrTSc , bit.ly/2Yf1VIP , (UK) amzn.to/3l7sI2G
- Terminal Cups - (US) parts-express.sjv.io/n1rn3R , (EU) bit.ly/2ZWcXDM
OTHER CHANNELS:
- Mixtape // Music for everyone and every occasion - bit.ly/3Cg3pUA
Recommended Gear, Tools, Amplifier Modules, Speaker Drivers, and more...
www.amazon.com/shop/soundblab
Audio Components & Solutions:
- Parts Express (US) - parts-express.sjv.io/yRNVk2
- Soundimports (EU) - bit.ly/3B0xWEn
- Axiomedia (EU) - bit.ly/3TUQUoA
Music: www.epidemicsound.com/referra...

Пікірлер: 398

@SoundBlab 2 жыл бұрын

The first 1,000 people to use this link will get a 1 month free trial of Skillshare: skl.sh/soundblab10211 ►NOTE: BUILD PLANS for this project is available on my website at soundblab.net/product/line-array-speaker-build-plan/

@r-ratedstudios3847 2 ай бұрын

line array ? where are the waveguides ? lil player.

@mitchellcampleman8236 2 жыл бұрын

Why so much hate in the comments? This guy is expressing his passion. Sound is extremely subjective. Keep up the great work mate. Love from Australia

@SoundBlab 2 жыл бұрын

Thanks appreciate it! Everyone seems to be an expert, but have nothing to show for it. I don’t claim to be one at all, I just love what I do. The principle of a line source such as that of a line or column array is the same.

@awardfoto1 2 жыл бұрын

Im always excited, impressed and proud when I find creative South African makers on KZfaq. A diaspora of some of the smartest people in the world.

@SoundBlab 2 жыл бұрын

Thanks

@crave8687 2 жыл бұрын

Oh my gosh that sound crystal clear through my earbuds. Great job 👏🏽 I enjoy listing to the different tracks, but the Jazz was my favorite 🤩.

@SoundBlab 2 жыл бұрын

Awesome! Thank you!

@sofaking1180 2 жыл бұрын

Absolutely stunning work. I can only dream of not just owning those beautiful speakers, but also being able to build them. Thank you for sharing your brilliant work!

@SoundBlab 2 жыл бұрын

Many thanks!

@dale116dot7 2 жыл бұрын

I built something very similar for my PA system, but I used Faital Pro 3FE22 drivers, 16 per side for the power handling, and a Faital Pro 12FH520 on each side for the bottoms, running a QSC GX7 to feed them. Although it’s slightly lumpy at the high end because of the separation of the drivers, just over three inches) the dispersion and sound is similar to how you describe. It takes a bit of EQ above 5k to even it out and to get a flat plot like yours, also a bit more like 97dB at 1W, 1m with the 16 drivers. I’m glad others are resurrecting the column arrangement, it can work well.

@SoundBlab 2 жыл бұрын

Nice!

@BLOVECU 2 жыл бұрын

thanks for taking us along for the build. i tried to speed it up to save a little time, however i felt a seizure coming on and decided against it. the quality of your work and the materials used looked marvelous. quite a craftsman. i'm sure the outcome sounds as good as the test results imply. new subscriber here and looking forward to your past videos and future constructs. cheers from an old speaker builder in california.

@SoundBlab 2 жыл бұрын

Thank you!

@jameshobbs1460 2 жыл бұрын

Nice work.. I have built many a box and speaker cabinet.. glad to see someone who does mechanical fasteners instead of just glue.. speakers sound amazing.. thank you for investing in a good mic and recording.. big fan of Dipoles.. listening to this on my Def Tech 8060's.. sounds open. and full.. and unexpected depth.. A Well Done to you Sir!

@SoundBlab 2 жыл бұрын

Thank you very much!

@KingCookingASMR2053 2 жыл бұрын

I don't normally watch the ENTIRE video that people post of builds, but, this. Wow. Absolutely beautiful.

@SoundBlab 2 жыл бұрын

Thanks!

@stiffmeister0hYeah Жыл бұрын

Same hear, but my computer is connected to Klipsch The Sixes and their 15" sub.

@frankcoffey 2 жыл бұрын

I designed a similar system back in the 80s I called the "Periscope". I didn't get a chance to build them but it's nice to see and hear these. There are much better drivers available today so there is no way my old design would have sounded this good.

@SoundBlab 2 жыл бұрын

Thanks for sharing

@mitchellzuro207 2 жыл бұрын

I envy your know-how when it comes to sound/audio. I can build nearly anything, and could make the most aesthetically pleasing speakers - but - I wouldn’t have a clue when it comes to how to tune speakers, or how to pick correct speakers and different internal components, in order for my build to sound as beautiful as they looked.. amazing job, mate!

@SoundBlab 2 жыл бұрын

Thanks!

@plameniliev4137 2 жыл бұрын

I just wanna build EVERY single project of yours ! Its so great looking !

@SoundBlab 2 жыл бұрын

Thanks 😊

@Burythelie 2 жыл бұрын

Great Video! One of these days i'll make a line array, very cool speakers. You make me want to become a better woodworker

@SoundBlab 2 жыл бұрын

Cool 😎

@gordiefrench5342 2 жыл бұрын

as always beautiful craftsmanship love the design

@SoundBlab 2 жыл бұрын

Thanks 😊

@northdakotabeast1547 2 жыл бұрын

Literally like How It's Made, but with great music as well. Wonderful build, and video!

@SoundBlab 2 жыл бұрын

Thanks!

@alexw890 2 жыл бұрын

Very cool. Never seen off axis response like that!

@macdellsaludario8185 Жыл бұрын

Wow the quality is like a megaphone.. im so impressed 👍👍👍

@ntekaactive6843 2 жыл бұрын

Absolutely loved every minute of this video and build!!! Outstanding

@SoundBlab 2 жыл бұрын

Glad you enjoyed it!

@copetimusmaximus3363 2 жыл бұрын

Thank you for the videos, and for including the measurements.

@SoundBlab 2 жыл бұрын

You are so welcome!

@luckyrashes 2 жыл бұрын

Amazing work, as always. Those measurements were amazing

@SoundBlab 2 жыл бұрын

Thanks! The measurements are smoothed, but just for the sake of comparing more easily visually. Even with lower smoothing it still looks very good.

@olobiksnagol2178 2 жыл бұрын

@@Clobercow1 The results are heavily smoothed, at least 1/24 or Var smoothing would have provided more accurate graphs. To be honest, even Psychoacoustic would have been better.

@fonque 2 жыл бұрын

woodwinds really shine on these speakers!!

@viktornedelin9671 2 жыл бұрын

Man, you do unique things! Respect! I can only dream of such systems...👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@SoundBlab 2 жыл бұрын

Thanks 😊

@howie419 Жыл бұрын

Thank you for sharing this very interesting build. Never seen any like them. Lovely sound. Wish I could build them now.😞 Last ones I built were 4ft tall folded transmission line, in the late '70s 🙂

@SoundBlab Жыл бұрын

Thanks!

@chris197761 2 жыл бұрын

Wow it sound so clear and natural well balance to my hearing.

@SoundBlab 2 жыл бұрын

Glad to hear that!

@prashanthb6521 2 жыл бұрын

Beautifully done.

@SoundBlab 2 жыл бұрын

Thank you very much!

@warriordrum 2 жыл бұрын

Very very clear. Line array is a great way to clearcoat your ears.

@SoundBlab 2 жыл бұрын

👊

@ec6843 Жыл бұрын

Really cool speaker design. I wish I had the space, tools, and skills to do that level of woodworking.

@SoundBlab Жыл бұрын

Thanks

@mronepaper4098 2 жыл бұрын

sounds amazing through my studio monitors. very nice.

@SoundBlab 2 жыл бұрын

Cool, thanks 😊

@surround1969 2 жыл бұрын

Very professional job ... love it ... thank you

@SoundBlab 2 жыл бұрын

Thank you very much!

@creatiflight7324 Ай бұрын

🎉🎉🎉 LUAR BIASA...🎉 I'm from Indonesia I will follow you

@keatonjones6115 2 жыл бұрын

dang dudee! such a cool project, amazing build =)

@SoundBlab 2 жыл бұрын

Thanks

@nomadxl6827 2 жыл бұрын

The best built so far!

@SoundBlab 2 жыл бұрын

Thanks 😊

@daveeckblad 2 жыл бұрын

This is a really well done build. TY for sharing your design processes and build techniques! I do wonder, if this would be better described as a "Column" speaker instead of "Line Array" as it does not have vertically steerable elements. A very pendantic clarification on my part. But, one that may help others find similar designs to compare. Cheers!

@SoundBlab 2 жыл бұрын

Thanks. I think essentially a column speaker is a line array, that is if the column comsists of an array of same drivers in a vertical line. You could call it a ‘column line array’ perhaps.

@daveeckblad 2 жыл бұрын

@@SoundBlab TY. Yeah I think it's kind of "a column is an array and an array can be a column" sort of definition. Obv what you have here is well designed for it's application and that's what matters. Thanks again!

@unknownregions5014 2 жыл бұрын

Id agree this is a column array rather than a line array, typical line arrays also have 10-15 degree vertical dispersion between boxes to stop comb filtering. High frequency drivers are usually set within a horn to control the dispersion of the driver to get that 10-15 degrees. With lower frequency drivers, of course it means the dispersion is more omnidirectional due to the length of the waves, however using phase cancellation using the different degree of phase from the sound coming out the back of the driver, can be used to control the dispersion out of the front of the box, using a ported horn, and creating a better phase response from the indivual box to group of boxes. As the dispersion of your column array is set by the conical dispersion of each driver and the amount of drivers in a line, their is overall less control of phase, as the drivers get further apart, for example the top and bottom driver in the array, it will cause comb filtering depending on where you stand or sit, this is the inherent flaw of using full range or high mid drivers as the main speakers and and just having them next to each other open with no horn or wave guide.

@nathanjames4242 2 жыл бұрын

@@SoundBlab I agree that you would be hard pressed to call this a real line array. Line array is a very specific thing. Certain measurements between drivers and air spaces need to meet very specific requirements to be classified as line array.

@TrinhLe-cz2xj 2 жыл бұрын

@@SoundBlab q

@joshuasterling2144 2 жыл бұрын

Looking at your stuff on the console I realized that I either have it our considered buying it at one point or another...lol Cheers.

@marcellus-br3981 2 жыл бұрын

Parabéns, excelente trabalho.....

@SoundBlab 2 жыл бұрын

Thanks

@bolamick3278 2 жыл бұрын

Parabéns ficou show de bola 👏👏 👏

@SoundBlab 2 жыл бұрын

Thanks

@richh650 Жыл бұрын

Excellent build sir!

@SoundBlab Жыл бұрын

Glad you like it!

@jairorinconesperales 2 жыл бұрын

Espectacular!!👍

@SoundBlab 2 жыл бұрын

Thanks

@eballacharles0302 2 жыл бұрын

thanks sir i like your project always support your channel 👍👊

@SoundBlab 2 жыл бұрын

Thanks so much!

@parlanmoothoosawmy5456 2 жыл бұрын

Wow, I'm already a fan

@SoundBlab 2 жыл бұрын

Thanks 😊

@jeffkalina7727 2 жыл бұрын

I imagine the sound was excellent. How about the sound stage? Once the insulation dried out I bet it was even better.

@bryansu Жыл бұрын

awesome design

@SoundBlab Жыл бұрын

Thanks a lot

@luisfermin8344 2 жыл бұрын

Awesome video, I would like to see this same design but with bigger speakers 4 inch drivers and the subwoofer 12 inch

@SoundBlab 2 жыл бұрын

Thanks

@robinprivat3024 2 жыл бұрын

The fullrange drivers are available in a 4 inch version (Dayton Audio DMA 105)

@mrpositive8664 2 жыл бұрын

Really nice!

@SoundBlab 2 жыл бұрын

Thanks!

@afprojektcz 2 жыл бұрын

As always nice work!😉👍👌🔊

@SoundBlab 2 жыл бұрын

Thanks

@afprojektcz 2 жыл бұрын

@@SoundBlab 👍

@jalechavez6042 2 жыл бұрын

Fantastic..!!...Debe Sonar Fantástico...ji ji ji... Saludossss

@SoundBlab 2 жыл бұрын

Thanks

@user-hx4ri4cs4x Жыл бұрын

Классная работа👍

@SoundBlab Жыл бұрын

Thanks

@davidwatchesyoutube247 2 жыл бұрын

Outstanding

@SoundBlab 2 жыл бұрын

Thanks

@DonnieMulligan 2 жыл бұрын

Very Nice Job!

@SoundBlab 2 жыл бұрын

Thanks

@joshuasterling2144 2 жыл бұрын

Sounds pretty darn good....

@SoundBlab 2 жыл бұрын

Thanks!

@anandshah71 2 жыл бұрын

Is this the best sounding spesker of all the projects that you have done till date

@SoundBlab 2 жыл бұрын

I think each project sets different goals, and each one has unique characteristics, so I can’t say one is better than the other, but it does sound very good and I enjoy listening to these. Definitely one of my top choices.

@iceman45ification1 2 жыл бұрын

Sounds amazing!! Well done sir. 🔥🏆🥇

@SoundBlab 2 жыл бұрын

Thanks

@user-cd9rm8vt6r 2 жыл бұрын

it is a masterpiece!!!

@SoundBlab 2 жыл бұрын

Thanks

@uus_baedarus 2 жыл бұрын

Awesome😍

@SoundBlab 2 жыл бұрын

Thanks

@erikkroll2154 2 жыл бұрын

I am listening to this with the same tweeter and woofer. My mids are the RS100 paper cone Dayton driver crossed over at 250 hz and 4khz. Very cool project. Great wood working skills. Love this channel.

@SoundBlab 2 жыл бұрын

Thanks 😊

@aurelioislas5152 6 ай бұрын

Buen trabajo y bastante elaborado ...los tewters estan conectados en paralelo?ya que eso bajaria mucho la impedancia casi a cero..saludos...

@PartsExpressOfficial 2 жыл бұрын

Awesome Video!

@SoundBlab 2 жыл бұрын

Thanks so much!

@prashantk3269 2 жыл бұрын

Looks very Superb quality speaker, crisp and clear explanation.great video for audio lover Would like to learn how to construct 3 way cross over for my diy projects for 3 way speakers, please guide, thanks in advance

@SoundBlab 2 жыл бұрын

Thanks

@Xtreme-k9k 2 жыл бұрын

I have become your fan Bro you are very intelligent You deserve 10M subscribers and 3M like on this video

@SoundBlab 2 жыл бұрын

Thanks man 👊

@adenaya332 2 жыл бұрын

Hade si eta nyieun na euyyy... Perpecto

@robertadler5453 Жыл бұрын

Looks terrific, I just bought one of your designs which I'm looking forward to getting on to. Just a thought though: for gluing the veneer I usually lightly coat both the support and the veneer with white glue and after it dries a bit, maybe 15 minutes or so, I just iron it on. Speeds things up, no clamps and works great. Try it

@SoundBlab Жыл бұрын

Thanks for the support! I have not tried this method before. Lately I have just used spray-on contact adhesive, which also works very well. I will try this sometime. Thanks!

@robertadler5453 Жыл бұрын

@@SoundBlab So I just finished making the slimline 3 way design. Looks almost exactly like yours since I had some walnut veneer left over from a job. Sounds terrific. Thanks so much.

@SoundBlab Жыл бұрын

Awesome!

@alcidescortez8936 2 жыл бұрын

Wao... que increíble proyecto... Se siente la calidez de la música. Mis felicitaciones.

@SoundBlab 2 жыл бұрын

Thanks

@saniarrahman 2 жыл бұрын

nice build

@SoundBlab 2 жыл бұрын

Thanks

@alxdava2004 2 жыл бұрын

I wish to see more more slim enclosures, similar to soundbars because they can be put on the wall, furniture, horizontally, vertical and don't need a lot of space. If you can go to 40-50Hz will be more than enough for 99% of people.

@anandshah71 2 жыл бұрын

Anything’s that in your radar I am keen to do a slim project

@xx1simon1xx 5 ай бұрын

If you rotate this design to the side (horizontal) it will loose evetything that makes it great. It will suck at imaging, the dispursion will be very narrow and riddled with colmfiltering nuls, in short, dont do it.

@kwonpae-corr4300 2 жыл бұрын

very clean and beautiful speaker build. never knew that the passive radiators needed to have weight like that on the back of the cone, how do u know how much weight to add based off the sub you are using?

@christopherjolly Жыл бұрын

You can tune them by ear. Start by mounting the passive radiator inside out so that you can easily access the back of the cone to add or remove weights to your liking. Once the tuning is to you liking mount the passive radiator the normal way with the back of the cone inside the box.

@geoffreymills9932 6 ай бұрын

Id love to hear a replay with the aray being centered in the corner between the sub and the radiator, subs pointing out and the radiators pointing in at a 45 degree

@liroso 2 жыл бұрын

Wonderful build. My only, admittedly subjective, opinion is that I would have preferred to have the entire cabinetry in black with rounded edges all over, perhaps encased in black acoustically transparent fabric. The aluminum post for the array unfinished. Overall great job!

@SoundBlab 2 жыл бұрын

Thanks. I like the idea of the rounded corners.

@MyOwntuahur 2 жыл бұрын

Veri nice info.. awesome produk

@SoundBlab 2 жыл бұрын

Thanks 😊

@MyOwntuahur 2 жыл бұрын

@@SoundBlab welcome

@kenr4540 2 жыл бұрын

Nice Video! I am curious what is the name and artist of the Jazz background music in the beginning of the video played in the 1st 6 mins?

@himanshudj 2 жыл бұрын

This ka what I am waiting for

@SoundBlab 2 жыл бұрын

🤙🏻

@JoshM7 2 жыл бұрын

Very cool clean build. Though the graphs look odd. Like there's some comb filtering or standing waves or something causing it to rise and fall at a steady rate across the range of the Frequency Response. Though I'd imagine that could be fixed easily with DSP and a few low Q filters.

@hualieno4119 2 жыл бұрын

You can’t fix comb filtering with DSP, nor EQ. The only way to fix it is to move way back. And the graphics are misleading. Stand up above the line and the highs completely go. That’s the vertical dispersion limited only to the height within the line.

@JoshM7 2 жыл бұрын

@@hualieno4119 Maybe "fix" wasn't the right term. Like a null you can't fix with DSP I poorly worded what I said and Instead I meant you can somewhat tame it based on the graph I saw. It won't fix it. But might make it less noticeable. At least a little. Placement would be the main focus to get where they play best then DSP after that. Though I wouldn't want to have to deal with that comb filtering at all if that's what it is. I'm not sure what that is but It just looked kinda like it.

@jeffp7038 2 жыл бұрын

@@JoshM7 Trouble with comb filtering is that when you move just to a different seat on the couch, it is a completely different tonal picture. Sit in the center, and there will be a gap at, let's say 6kHz. Move a bit on the couch, and your gap is now a peak at 6kHz.That's the comb filtering in action. So, if you EQ the center position trying to raise that null in the center (bad idea), then the person sitting next to you will have the peak even more intensified. Same goes if you go the other way. If you try to tame a peak at the center position, the others will have a chasm. And you can't do multiple measurements because they will average each other. Really, the only way to deal with comb filtering is keeping the drivers small, the C-to-C as small as possible, and putting some distance between you and the speakers. Line arrays are wonderful, I built a couple myself, but they do need certain care, and yes, they do need DSP, even after you took care of the comb filtering.

@JoshM7 2 жыл бұрын

@@jeffp7038 Ohhh ok. I typically only have one seating position and rarely anyone else in the room. So I'm only really tuning for my position. But that makes sense as it's just like other audio related problems. Just a different way to tackle the problem. When I had a single sub it was extremely positional and hard to get a smooth response across the range. But was doable after lots of trial and error with different positions in my room. Switching to dual subs helped a lot and sounds more full almost everywhere in the room compared to a single sub. Even though I only have the one listening position it's nice having that smooth response in other areas of my room. So I guess now the question is. Would time alignment fix the comb filtering? Might need each driver to have their own channel though... that's not always easy.

@jeffp7038 2 жыл бұрын

@@JoshM7 multiple subs is the way to go indeed. You can also play with phase between them to equalize the nodes around the room. The smallest line array I built was 9 drivers. I wouldn't do it again. I like being seated at the listening position, but I also want to have good sound around the room when I do other things. Small LA have tiny perfect listening spot, sometimes a few cms only! The smallest I would do is 16 drivers, and 25 would be better yet. And going through all the trouble of wiring all these drivers to get a very limited listening space is way too much hassle! If the room is too small to have LA in it, then, one should consider other designs. Trying to beat something into a shape it doesn't want to do is a lost cause, and will introduce way more problems than solutions. Time aligning them all with single powered channels is possible, but again... the amount of work involved is overwhelming! Wiring and assembling 16 or 25 drivers per line is quite the exercise in patience!

@venternico1 2 жыл бұрын

Love your work. Its a great inspiration to make my own speakers. Where do you get your veneer from? Would like to give that a go as well.

@SoundBlab 2 жыл бұрын

Thanks, thats good to hear! I get the veneer form VeneerCraft in Cape Town.

2 жыл бұрын

It's still a long way from the line array, but nice work, the processor is missing, which is the loop, the separately controlled speakers, and one important thing, the speakers are far apart, even in this case, which is the hardest solution for line array systems !! Thanks for the video.

@SoundBlab 2 жыл бұрын

Thanks

@l2ngr846 2 жыл бұрын

Keren banget 👍👍

@SoundBlab 2 жыл бұрын

Thanks

@xxxYYZxxx Жыл бұрын

A small 90x45 wave guide tweeter or tall ribbon tweeter could be mounted in a nested configuration, just inside and half-way up the line array.

@SoundBlab Жыл бұрын

Yeah, I like the idea. Definitely something to try for a future build. Thanks for the suggestion!

@SamsulArifin-ot6zf 2 жыл бұрын

Nice and kreatif

@SoundBlab 2 жыл бұрын

Thanks

@thepnimit...7043 2 жыл бұрын

Thank you sir 😊😊☺️

@SoundBlab 2 жыл бұрын

Most welcome

@fishingseang168 Жыл бұрын

It's really beautiful, I want to follow you, but do not know how inside? Can you tell me about the internal connection?

@ntinosbalentinopoulos3936 2 жыл бұрын

the best 👍👍👌👌

@SoundBlab 2 жыл бұрын

Thanks

@peterdionisio520 2 жыл бұрын

Please make vertical array that is angled 🙏🏻🙏🏻

@hatimjawra2949 2 жыл бұрын

How wattage is calculated in centre tap transformer?.... Like 12 0 12 5amps is 24v *5 = 120watts or 12v* 5 =60watts.

@user-lu2sy8qi5w 2 жыл бұрын

Очень круто!

@SoundBlab 2 жыл бұрын

Thanks

@NBC_NCO 2 жыл бұрын

I like your build . I've worked with veneers before but how about bending around corners such as a quarter inch bullnose ? Without using something like a vacuum bag.

@SoundBlab 2 жыл бұрын

Thanks. Never tried it before, but it will be tricky I would imagine if going against the grain. I am sure there are some tips and tricks involved. Something to explore then...

@nabilzahran712 2 жыл бұрын

very good bro from Indonesia

@SoundBlab 2 жыл бұрын

Thanks!

@wandersonuhuu5902 2 жыл бұрын

Estou fazendo uma projeto com um Woffer de 6,5 polegadas e duas domos de seda,qual é o projeto melhor?Uma caixa de 18 litros com dois radiadores de 16cm ou uma caixa de 14 litros com apenas um radiador passivo?

@BojanBojovic 4 ай бұрын

Great build, thanks. My question is about the tweeter position, I understand it reflects from the room walls, but this is not perfect. Would it be better to place two tweeters angled from each other 60 degrees for eeample? This is the only thing I do not like with my column array, it produces 120 degrees coverage, however the high frequencies are there for 40 degrees, no more unfortunately.

@arfaaudiochannel5285 Жыл бұрын

Mantap

@SoundBlab Жыл бұрын

Thanks

@richardwilkes2990 5 ай бұрын

wish I could buy these speakers after he builds them.

@wandersonuhuu5902 2 жыл бұрын

Amigo,quantos litros tem essa caixa?

@neomancr 2 жыл бұрын

It sounds like boom sibilance and harshness... I think there's good reason why people angle them. I've always wondered why even still they're not too popular.

@bryanlopezsilva9538 2 жыл бұрын

Soy mexicano pero todo lo que está diciendo o explicando con imágenes es correcto y muy sierto

@SoundBlab 2 жыл бұрын

Thanks

@classix2132 2 жыл бұрын

This is design is nice i like linearray is the mid hi connection is serries?

@SoundBlab 2 жыл бұрын

Thanks. No they are in parallel.

@timonarthur 2 жыл бұрын

cute but powerful 🔥

@SoundBlab 2 жыл бұрын

Thanks

@MrCbayboyz Жыл бұрын

hey awesome videos, can you share the link on where to get the router circle cutting jig

@SoundBlab Жыл бұрын

Thanks. It's a jig that came with my Triton router. I don't think it fits other routers or can be purchased separately.

@bennettshapiro7711 2 жыл бұрын

Thanks for doing this. Very very cool but so you know that’s not a line array. You mean a column array. A line array has a minimum length that it needs to meet in order to begin the line array effect. Anyway, thank you for this. Also so you know, it’s not the column array that gives an array it’s wide throw. It’s the fact that you were using small drivers. As a rule, smaller drivers throw wider than larger drivers. That’s true for point source speakers as well as arrays.