I feel like the phrase "I got this for free from my last job" needs its own jingle to accompany it.

16:18 RIP Electrical outlet, you died trying to save your best friend, the shelf.

I have never identified with a person on KZfaq more thoroughly than I did with you when you got to the "opposing taper" thing.

0:20 as many a teacher has told me: Nothing's more permanent than a temporary solution.

YT is only now--TWO YEARS after the fact--suggesting this video to me??? I have been cheated! Great videos, great content. Subscribed!

To be absolutely honest …. Your editing skills are way above the norm …. Great stuff!

Most likable guy on KZfaq.

As with any of your video creations, you are an excellent entertainer, but also a pretty darn good craftsman. Not only that though, to be honest and to see the humor in your mistakes adds to the entertainment. Thank you, I'm truly looking forward to your upcoming shenanigans.

The cuts to the bon fire and homeless drill press were perfect. You are rapidly becoming my favorite channel.

“Temporary solutions last the longest” is the greatest T-Shirt slogan I’ve heard in the last…bit of time.

I do not know where you've been my entire youtube-viewing career, but you have restored my faith in humanity. I even skipped a new oxtoolco to watch this... Yowza! Love your stuff.

Lost it at “ my drill press is homeless “ and it’s just lying on the floor sideways.

18:50 "....faffing around" nice i use that word and everyone looks at me weird, glad someone else uses it

Ill be honest, I think the stop blocks actually look really cool.

I honestly only stayed for the humor. Wonderful video.

Best Name Ever for a radial arm saw!!!

Glad that I'm not the only dork with time on my hands!

"The temporary setups last the longest" I feel this in my bones.

Why you don't have hundreds and hundreds of thousands of subscribers is a mystery to me. Your vids are informative, entertaining, humorous and actually contain a fair amount of technical savviness. I enjoy both of your channels and always look forward to their posting. Keep up the good work.

I had to set up a huge woodshop a couple decades ago.. and warehouse floors are never level.. I used a cabinetry trick I built a base on the floor that was about 6 inches high, I started by placing 4x4's flat on the floor every 2 foot.. I painstakingly beveled and trimmed each each one till they were all level to each other & front to back. it took me 3 days my highest point was 2 inches.. when finished I placed plywood over it and built my 30 foot long table on top, I actually had the same setup you are using and for the same reason.. I only used the radial for dado's.. The shop has had more modern tools to replace the older during the years, but the table is still there and never had to be altered.. I love your channel.. Be Blessed and keep up the good work...

17:08 That´s a big Roomba

17:00 What the hell is that glorious beast?! EDIT: Found it! Thank you for the link. This would've been SO helpful when my kids were in their Lego phase.

The smiley face on the dust collector bag, brilliant!!!!!!!!

Great Job I Believe You The Only One With A Mitter Box And Radio Arm Saw...

The quick-shot montages you do would make great backing tracks for a garage workshop band.

The project is amazingly shown. The humor, it's great, too. Laughing

I love your comic timing on the assembly edits!

please ...never change - always look forward and enjoy your posts

1:47 "well it's impossible bc I don't have enough space" Sir, you have 4 cars in your shop

Aw those tiny cars are so cute. Think i could fit one in the bed of my truck. Lol

I am glad you were on, "Technology Connections." From there I discovered your other channel, "Aging Wheels." I was watching one of the bus episodes and my wife was laying beside me. I begin to say, "You know what would." Before I could even finish my sentence she said, "There is no way we are getting a damn bus!" In my defence, I didn't want a bus. I was imagining a fresh food truck that delivers food and other supplies to campsites would be dope. Keep up the great work and please do more stuff with Alec from TC.

Save the drill press!

My God!. It is so refreshing to see other woodworkers like myself assembling things incorrectly occasionally like I do lol. Mistakes are part of any crafts and I do enjoy your humor with everything!

“The temporary setups last the longest!” Rarely have truer words ever been said b

and here I was wondering to myself "why is he taking so long to put up videos on his main channel" then I discovered *this* This is a gold mine, I am so glad I went to your second channel, I absolutely adore it! Thank you Robert!

Really appreciate an honest build video with all the "fixes". The difference between a craftsman and a noob is that everyone makes mistakes ,,, a craftsman know how to "fix it" and the noob has no idea.

So watching full build videos is almost therapeutic. I just put them on and go to work at my desk . NOT YOUR VIDEOS!! Its full on entertainment. Its like Fat Albert fun and educational "dude you kill me" Subscriber for life!!

I call dibs on "Voracious Midnight Hammering" for my next album.

Ah, the classic arm chopper and disemboweler combo. Any proper shop should have one.

I love your style. We share the same sense of humor, but you have a much better delivery. “Cut a hole in the wall” to keep miter saw cord from rubbing. I was literally thinking that 2 seconds before you said it. :)

new favourite funny woodwork channel.

Funny, makes viewers entertained as we get ideas for our projects

Ahhh... What am I old? 😄 Classic! Yep, we're all getting there. Good video.

I appreciate that you show mistakes were made along the way. Great job using reclaimed materials. I think you’re cross cut station is going to look outstanding when it’s all complete! Thank you for sharing your trials and tribulations along the way.

Cool Cars - best is the Trabant - i learned driving with one of this, 30 year ago - i like it this plastic cars and your Videos too. Greetings from Germany

nice to see someone beside me see the value of a RAS

Finally someone else that did the same thing and set up a miter saw and radial arm saw on the same bench WITH THE BENCH OVER THE RADIAL ARM SAW.

First video of yours that I've watched. I'd come back just for the humor alone! LOL! Love it!

“The temporary setups last the longest.” Amen, brother!

The editing of the fire was gold. As gold as the hammer.

Not too many woodworkers have an extensive Renault collection! Even the famed "Robin"!

I love the honest humor

I love your sense of humor and editing, great job 👍🏻

The sounds of the stop motion (jump motion?) are almost musical in an #asmr sort of way. Especially the segment when you were using the hand saw.

My favourite new woodworker ,it was like watching my self . " I may just cut a hole in the wall later " LOL

I love your videos and your personality.

Dude,I'm loving your vids. The screw ups and self deprecation is refreshing with so many "master woodworkers" on KZfaq pretending they never mess up.

Love the registration plate on the Robin..... happy 90k

I like your sense of humour, several smiles in the video for me. I also like that you bugg3r things up too and keep them in. Looking forward to the next one, thanks.

Just come across this and immediately I am in stitches. A Reliant 3 wheeler with the number plate BOLLOCKS....brilliant

This is the first Under Dunn video I've seen. UD: "Ow! What am I, Old?" Me: "I identify with this guy." SUBSCRIBED

Love the editing and the humor!

16:48 is still one of the best Dunn comedic moments of all time.

I love the fact that you don't hide or edit out your mistakes. I can really relate to that. I have a lot of "Doh!" moments as well. Keep up the good work.

I love how you keep your mistakes in your video. No matter how many years we do this we all still make mistakes sometimes and it makes it more real to keep them in and make a joke of it.

Excellent video… Very humorous and very informative. This could be one of my favorite videos… Ever. Great job

You kept me on my toes! Very funny and entertaining. Thanks.

I always hesitate to watch your woodworking videos but I never regret it afterwards, keep up the good work

The humor .... 😍 Made my day!

I love your delivery. " this would be a lot easier if I had the thing I'm building"

My favorite (among many really good ones) was "...that's a dog bed..." I built a box (frame?) for my table saw so thanks for that video too; now I'm going to build my miter saw station. Great production values, pacing, and wry comments....you really set yourself apart from the rest!

I really enjoy your presentation style. You're a very funny and charming dude. All the best!

Nothing is more permanent than a temporary fix that works.

I like your wing it as you go design method!

Gotta say, I love the way you show EVERY nail. You make me laugh.

Love your sense of humor !!

trusted that single clamp to save you from some wicked frisbee kickback

I don’t do woodworking, but love your approach to problem solving. I am a small run apparel manufacturer and as soon as you put the legs up to show us, I knew what you’d done. Having cut out four pairs of pants with 8 left legs once, I can say this error usually only happens once every ten years or so.

Frank would be proud!

Great intuitive video, thankyou, the humor was very witty and enjoyable, regards Louie UK

I can't be the only person who rewound 'That's a dog bed'? I howled 🤣

Your stop motion time lapse things are extremely satisfying to me.

Facebook marketplace can be an amazing place to find tools. Got my 10 inch craftsman radial arm saw and stand for $40.

Hilarious. It's nice to see a craftsman who not only makes mistakes (we're all human!), but also acknowledges them and can laugh about them. Keep up the great work! P.S. I love the way you edit the video with the rapid-fire cutting/nailing/drilling montages!

"I got this free from my last job, because I stole it". That comment alone earned you a sub.

If you don't slow down with all of these projects, you'll run out of things to improve. Procrastinate now so you have something to do for later!

Just discovered your channel. Excellent work sir. Really appreciate the sarcastic humor!

The nail gun montage was satisfying.

bang bang bang bang bang bang, You're very quick with that nailer

The most entertaining style, ever. Superb 😉😉🤣🤣

I almost spit my drink out on the screen when you made the emergency apendectomy comment. 🤣🤣

I haven't even watched this yet, but my day is better knowing you dropped some new content. Thanks!

Like your sense of humour

This channel is one of youtube`s gems!

I've used other (10" saws) previously and was pretty surprised with the speed and cutting ability of this Dewalt saw.I have bolted mine to a table to minimize movement which I highly recommend.This is a Great saw kzfaq.infoUgkxPeGkHOMe05FySypTOvYumxMn-xi39oRe with a light to see your cutting line (not a laser line).I'd recommend this saw fro anyone looking to upgrade from a 10" miter saw.

I love that you leave in your mistakes. Keeping it real.

Hi. Very fun to see the way you edit. Have not seen anything like this before. Except on your channel. Very good! AND you are very skilled!

Like your editing humor, good presentation

Love your content. Especially where you admit that there were woopsies and its not perfect everytime. Just like a more normal person. You are a great entertainer, thanks

Nice reg plate on the blue car. 😉 Great videos, both informative and entertaining. Thanks, keep going.