Wow, I can’t even lie, I’ve seen every single table saw/workbench on KZfaq. This one is by far, the absolute best one by far. The attention to detail does my OCD so good and just the craftsmanship alone deserves a subscribe, like, and an extensive comment. Well done my friend. I’m looking forward to building one of my own soon, and I will be using a lot of the same ideas as this table. You are an artist and a craftsman of almost unparalleled skill. 110% grade score in my book. Can’t wait to binge watch the rest of your channel. Thank you for the amazing content. As I was watching, my wife asked what I was going and I simply replied “watching the absolute best video there is on KZfaq, I’ll be here for a few more minutes” hahaha 🤣 😆

Beautiful… I was a bit confused when you pulled out the wood flooring, but then quickly became impressed with your idea…

Watched in amazement. The part showing the clearance for the power cord blew my mind, I would not have thought of that.

I've never seen someone use the wood flooring for the top, but this is gorgeous!

This is a trabl that you build and not work off because it looks great. It's the type your buddies come over and drink beer and talk about how you built it. Great job.

This... is truly a masterpiece! This has given me ideas for my desk backboard I'm currently working on. Wasn't quite sure what I wanted to do with the backboard, was thinking using some sort of kitchen type tiles, but floor laminate was something I didn't think of.

Wow, of the ones I’ve seen this one is built of easy to source, affordable materials and still looks great. Really amazing build, thanks!

The hardwood flooring top is a great idea. Gives it a beautiful look and adds tickness/weight at a price cheaper than finished plywood. I’m going to make a very similar table and but later add a router section with some t tracks and perhaps a 2nd flip station for planar/sanding down the line.

Beautiful, practical, and very inspiring! That hardwood flooring idea was really creative. I like everyone else here…. I’m looking for a space saving , mobile/practical workstation for my miter and table saw’s. You should sell the plans for this 👍

Fabulous build, impeccable detail, well designed, I could go on with superlatives but that would be slowing me down from starting my own table. Exactly what I have been looking for to have easy access to my miter saw. Never bought a set of plans in 40+ years of woodworking. This just might be the first. THANK YOU for such an informative video!

Using the slats blew my mind away, I have built a work bench for my mother with a mitresaw using this technique! Thank you for the inspiration!

Man you are a perfectionist and this is some luxurious and practical work. . I hope I reach this level in one year, today I bought my first tools and few weeks back start watching carpenter woorks

This Is not just woodwork, this a a serious engineering masterpiece. Well done. It gave me a few ideas but it will be a less ambitious project.

Absolutely beautiful. I am inspired! I thought I'd seen every possible iteration of this type of workbench, but you've set the bar higher than ever, and now I need to get to work!

Wow, that’s all I got. Like the idea with the flooring on top. This is a showcase piece.

Looking forward to seeing more of your content and builds. You have an excellent eye for details!

You should do a second video of what the table looks like now and if you’ve added anything else to it. I’d say dust collection, drawers, power management. The table is too big for my space but thanks for the ideas. Will have to see if I can mock up a smaller version.

This thing is like a friggin piece of furniture! Beautiful.

This was a really nice job. I built a smaller rolling table for belt sanders and grinder. I recommend using a long vertical board on a hinge that moves out of the way for rotating the top and back under to transfer load all the way down to the base of the frame. Over time the latch you used may creep and with the board you can actually pound on the top with no worries

Impressive, just the way I would like to do, but don't have the space. Thumbs up and a great job.

Looks just AWESOME ! Lots of attention to detail.

I am very rarely speechless. This is one of those times where I am. In my mind I keep saying, "Thou shalt not covet, Thou shalt not covet" while I am wiping away the drool!

That is fantastic! I've looked online and seen other designs that are much simpler but involve sliding the entire saw out to manually flip it over. I thought it could be done the way you've done it but couldn't work out the depth dimensions to have the open surface level. I admire your attention to detail too even with "common" lumber.

I absolutely love this workbench. You did such an awesome job Kenny!

This one is so nice and outstanding detail. It’s also way above my skill level. I found a novice one that will work but maybe one day I could build this too.

Incredible, have been looking at different workbench builds over the last few weeks and this is far superior to any of them. I aspire to be able to build a bench to this quality. Thank you for sharing.

Nice work I have a fair bit of old flooring pieces I was going to throw out. I never thought to repurpose them like your build. I hope all is still well with your bench after 12 months of use. Agree with one of the comments here its one of the best I have seen so far

Beautiful work of art!

Gorgeous. And the design of an experienced problem encouterer.

Wow, what an awesome job creating your worktable. It will last a lifetime and then some.

Wow! I thought I had seen the best in bench saw tables combined with drop saw tables until I came across this video. Beautiful workmanship. Well done. I've subscribed...

Mycket snyggt! Bra att du även visar missarna du gör! Även vi lär oss av dom.

I just watched someone who merely had the miter saw drop down and you drop a board in the place. I thought if I did it I would make it flip over. But I felt was out of my abilities I noticed a craftsman's skill with wood has a direct correlation with their tools. The skill comes from learning how to use them.

Over the top. Exactly what I need!!!

Fantastic build. Thanks for sharing!

Holy Schnikie !! SERIOUS craftsmanship.. Thank You

Best I have seen, with basic tools well done, German engineering

Great table! Way beyond my skillset to build lol. When I do decide to build my table, I will certainly use some of the brilliant ideas from this video to incorporate.

So well build and your attention to details are top notch. I always want a miter saw with flip top and build in table saw like yours but with limited space in my garage. I will try something similar with a smaller scale. Thank you for sharing your work.

Great design & excellent craftsmanship! I’ve been wanting to build something similar for several years and finally found the design I want to duplicate. Thank you so much for sharing your plans

Bravo! Very clear presentation. As a beginning woodworker this is a confidence-building vid. Watched it twice and will refer to it again as I progress. Thanks

I never would have thought of putting wooden flooring on top, it makes it look so much better than just plywood.

Amazing portable work bench build video!!!

Absolute Precision.

This isn’t for a novice carpenter. This man has skills and the tools to do this. Recognize master craftsman. Great job. How long did it take to build this masterpiece?

Great build. Really amazing. This is a project worth paying for the blueprint. I mean a PDF blueprint. Thanks for sharing

Bravo! This is a beautiful build! Your attention to detail is very evident. Thank you for sharing.

Great build!!!! One of the best I have seen. I build a cheap one years ago and had a hell of a time getting the top and the fence to line up perfect!

Just 4 minutes into this video, I must say I admire your talent and attention to detail, Well done. That fancy alignment tool you used while attaching legs, (your foot) , nice touch

Simply incredible. God level patience.

This is the best working bench I’ve seen

Fantastic bench, I love it Colin 🏴󠁧󠁢󠁳󠁣󠁴󠁿

Kul att se fler svenska makers! Det blev en riktigt grym arbetsbänk! Kul att se!

very nice job, i really liked the way you use stop blocks and clamps to make sure you had proper alignment when matching up 2x4 joints.

Phenomenal build! Love the precise measuring/cutting and custom built pieces! Very, very nice work bench!!!

Very beautiful! Too much for me, but I love the idea of flipping the miter saw!

Damn. You guys out there in the world are so inventive.

This is definitely one of the best workbench ideas I've seen, id be paranoid about the finish just in case I scratch it lol

Absolutely beautiful table. I've purchased the plans and was hoping that you created them in SketchUp and wouldn't mind sharing the plans. I want to add my router table to the end opposite the table saw and make minor changes in a few dimensions. Thank you in advance!

Fantastic design, great details. Thanks for sharing this. Going to copy a lot of this build for my own table.

1 thing i have to say WOW 😮 AMAZING 👏🏼

A masterpiece! I like the hardwood flooring idea, I think I'll borrow it except, I won't put spruce trim around it......and I'll miter the flooring edges so it drapes over the sides.

work of art! Thanks for some great ideas that I can use myself.

Awesome table. Need a built plan for it

The best workmanship I've seen on KZfaq. Im unsubscribing from everone else. This table will outlive us all.

Beautifully Done! I wish I had the time, energy and skill to make such an amazing table - Thanks for sharing

For a work bench wow. Just wow

Excellent work. I'm inspired and will aim to build a replica for my shop. Thank you.

丁寧、奇麗、機能的な作業台ができましたね。使うのが楽しくなるでしょう。 素晴らしいです。

Magnifique travail, BRAVO!!!

That is a thing of beauty great skill

It's an incredible project. Way over my head.

This is a great bench. Congratulations on the best design I have seen. Cheers Singoau

Very interested in the flip top. Very well done with details. Love the fine adjustments.

I love your work ! You have the patience of a saint. Thanks for the great video :)

Phenomenal. 👏👏👏👏 Sadly it would be too heavy for my shed floor and would crash through it, what with all that lumber AND the tools.

"LIKE A GLOVE!" 👍🏼👍🏼 Haha Those Craig jigs are dope right. Makes things waaay easier.

Good-looking build, as always.

Yeah it's alright I suppose, it'll do the job. As long as you're happy 😀 I bet you never got could do better in your woodwork school report Awesome job and great camera work as well 👏👍👏👍👏👍

Amazing build. Plans purchased. I only have a tiny workshop, 7ft x 7ft, so will scale to fit. Wish me luck!! 😀

Amazing craftsmanship 🤗

WOW!! You're skill level is amazing. I would never attempt a build like that.......... even with the plans. Absolutely the best I've ever seen on You Tube. (I just clicked on Subscribe)

It’s beautiful but god it’s big! 😳 I’m trying to figure out a way to reclaim some floor space. Thanks for the vid brother!

Veel werk maar perfect. Klasse!

That is amazing and beautiful my friend! I am building my shop right now, the shop needs a bench like this so I'll be doing something very similar to yours. Absolutely incredible! Thank you for sharing your talent and dedication to the art of woodworking!

Mil felicitaciones, queda uno sin palabras para describir tan hermoso trabajo realizado. EXCELENTE

Absolutely incredible!

Well done

Geniale Idee und super Umsetzung. Kudos!

Man, thats a beautiful design, and nice to see you taking care of details.. It'll be nice to see your channel growing a lot..! 🙏🏽

A very nice design and build. I want one. I’ll have to download the cad file.

That was a lot of fun to watch! Thanks for the upload!

Geweldig mooie werkbank,dit is precies wat ik wil,ik ga hem proberen na te maken,mooie duidelijke filmpjes,top.

great job brother. Very nice!!!

Magnificent work, marvel at the quality and the finality of your assembly, I will try to do the same workbench. thank you for this wonderful video very instructive despite that I do not speak English and that I do not understand all the words. a delighted Frenchman 😉

But it’s too good to use! Lovely. Good job.

Awesome man I wish I had your shop keep going don't stop

I don't know what country you're in, but that construction lumber looks perfect! All our wood in America is crap!

I would love a set of blue prints to make this my self

Outstanding!