Building A Nativity Manger Stable Christmas Outdoor Display Recycled Fence Lumber "Awesome Results"

Рет қаралды 18,510

2 жыл бұрын

I'm building a stable for a wooden Nativity set. This little project has been on my list for a while. I finally found the correct lumber to get the result I wanted. It turns out old wooden privacy fencing is a good material for a rustic stable.

Пікірлер: 32

@hildy7336 7 ай бұрын

The rebar at the joints was genius . So was the roof in sections . Thank you for this video.

@Yellowdogsworld 7 ай бұрын

Thanks, my goal was to make it easy to move and store away😀

@michaelryan4825 7 ай бұрын

Great job man. Very impressed. Happy holidays

@Yellowdogsworld 7 ай бұрын

Thanks, you too!

@noemiosorio5694 Жыл бұрын

Fabulous work, love it. Great memories and joyful gatherings are awaiting. You inspired me to build one. Thank you

@Yellowdogsworld Жыл бұрын

Thank you, I'm glad you liked it. :)

@DavidGeddings 2 жыл бұрын

Wow that is really impressive! I love the modularity with the rebar! The lighting at night is amazing!

@Yellowdogsworld 2 жыл бұрын

Thanks, making it easy to take down and set back up was a must for this little project👍

@joemags8596 2 жыл бұрын

This really came out great. Looks fantastic at night with the lights. Merry Christmas to you and your family.

@Yellowdogsworld 2 жыл бұрын

Thanks Joe 👍

@barbaradarcy3821 Жыл бұрын

I love this! Well-made and does have the perfect worn look

@Yellowdogsworld Жыл бұрын

Thanks 😊

@mrtk2169 8 ай бұрын

😂😂❤

@tomdrost1222 7 ай бұрын

could you please send a few pictures of the under-side of the roofing sections? How many sections for each side?

@alanpitts798 2 жыл бұрын

Awesome job as always bro! Merry Christmas 🎄

@Yellowdogsworld 2 жыл бұрын

Thanks Bro!, 😎

@rtrobinson88321 2 жыл бұрын

Nice job, very cool

@Yellowdogsworld 2 жыл бұрын

Thank you 😊

@tomdrost1222 7 ай бұрын

I have built the three walls and assembled them but now have to build the roof. Please tell me how the ends of each roof section is installed so the other roof sections lay down without sliding off.

@Yellowdogsworld 7 ай бұрын

each side is in 3 pieces, the first piece has 2 planks with a gap between them large enough for the wall to extend up into the gap, this locks the lower part of the roof panels in place, the second and third one lay in place and rest on the lower ones. @ 2.51 you can see me trimming the wall, I measured it to extend through the first set of roof panels. the panels are tied together with small slates that will fit between the wall panels. " I hope this helps"

@imnosey9737 7 ай бұрын

Love it did u also make the people as well

@Yellowdogsworld 7 ай бұрын

I wish I had the artistic inspiration to make them, but they were acquired by my folks a few years ago. I built the barn to compliment them.

@skout1796 Жыл бұрын

I built one of these for my Church and 8 more miniatures. I felt like I got more out of it than the people who bought them from our church ladies.

@Yellowdogsworld Жыл бұрын

Cool, I get what you mean. I take a lot of pride in my projects, its not always about the end product but more the work it takes to get there.

@dtcrum 9 ай бұрын

Do you think if I didn't have fencing.....but some pallets, can I split each pallete down each end to make 2 squares of "fencing" if turned so the boards are up and down?

@Yellowdogsworld 9 ай бұрын

That's a pretty neat idea, i don't see why not.

@jamesmartin4524 7 ай бұрын

I used 1X6 fence Pickets

@deanday5007 8 ай бұрын

Cut list please

@ModestGamer84 Жыл бұрын

Thanks for the video. I’m thinking of building a nativity scene for my church next year. Do you have a video of the characters being built? That’s what Going to be a bit difficult for me to construct. I wanna make this a project for me and my father-in-law. My three sons can help a little too but they’re pretty young I have a one-year-old two-year-old and three-year-old by this time next year they will be a year older.

@Yellowdogsworld Жыл бұрын

My mother bought these from an artist who built them out of old lumber and sheet metal, they’re really neat. She asked if I could build her a stable, I had a friend who was tearing down their old privacy fence, so that’s what inspired this project.

@charlescannoy3660 2 жыл бұрын

Do you have a blueprint for this with cut sizes for the boards and such?

@Yellowdogsworld 2 жыл бұрын

Unfortunately no, I was sorta winging it. I had basic dimensions I was shooting for, each panel was 5 feet x 5 I think. I Laid out a jig of sorts on the floor to make sure my frames were going to line up. I’m more of a build it in my head first and go for it kinda of guy😁