Building a Robot Hand from Scratch

Рет қаралды 346,059

Жыл бұрын

This was difficult.
Design inspiration from Mahdi Designs:
• Bionic Hand Grip Testi...
Music by:
Joakim Karud - / @joakimkarud
Ouse - / @ouseofficial
LAKEY INSPIRED - / @lakeyinspired
Sappheiros - / @sappheiros

Пікірлер: 524

@chunji2321 Жыл бұрын

That's pretty handy

@A1C6 Жыл бұрын

…

@BIokBlok Жыл бұрын

Amazing

@b.k.5667 Жыл бұрын

Always a good thing when you need a hand

@TK75_ Жыл бұрын

That’s a knee slapping joke

@lod4246 Жыл бұрын

It seems you came here armed and ready.

@Kozzado Жыл бұрын

Good humor, interesting project, good video editing Keep it up

@user-kn6hv5qv8d Жыл бұрын

kzfaq.info4umEmbYADc8?feature=share

@juanit0tackit0tackito2 Жыл бұрын

“Silver is for the kettle, and gold for the furnace, but The LORD is the tester of hearts- Bible” your heart is like discovered silver, dirty and not pure, when silver is purified it is melted over and over, to the point that when it’s melted and glows red hot, it is pure enough to see your own reflection in the puddle, so also does the LORD purify your heart, till HE can see HIS own reflection in it, seek the LORD and be reborn, ask The LORD to renew and restore you, repent and ask The LORD for HIS Salvation for those who seek will find and those who knock the door will be open unto them, no man is good, all are in need of salvation, Jesus died so that our sins will be wiped away and so that we could be made new, seek The Kingdom of GOD for if you would be wise you would be wise for yourself, pick up your cross and deny your flesh and follow the path of GOD, for The Kingdom of GOD is at hand, in JESUS MIGHTY NAME Amen and Amen

@thomasmaiden3356 Жыл бұрын

@@juanit0tackit0tackito2 Huh?

@christopheribarra1170 Жыл бұрын

Him: What humor?

@cooperhardi4324 Жыл бұрын

Handy...

@nogoodgod4915 Жыл бұрын

I was honestly expecting the robot hand to give me the middle finger near the end.

@dekutree64 Жыл бұрын

You should definitely try custom PCB design. So much less soldering and wire spaghetti, and incredibly cheap these days, even with SMD soldering service. Usually cheaper than buying all the separate little boards and soldering them together. Well, cheaper per unit. But usually you have to order at least 5 units, so for a one-off design it is more expensive, and wasteful of components (which are in short supply as it is)

@BerserkSurvival Жыл бұрын

Totally disagree, you still need to solder as many things as you would have to without a pcb, its also much more organised and straightforward. However like you said, it would be more expensive and wasteful and of course, Gonkee's videos take enough time as is, this would make it even longer if he made mistakes with the pcb design again and again. If Gonkee possibly invested in a cheap 3018 pro cnc like I did a few years ago, and used it for pcb milling, we could see a lot more content like this and more crazy content, also maybe he could get into stm32 chips and creating boards for them, not just using breakout boards.

@tommywilliams7548 Жыл бұрын

lmao imagine trolling a computer programmer to not only switch to robotics, but to make PCBs as well. i have an idea, he should manufacture his own silicon wafers as well! what's the price of failure? just cancer in your 30s is all

@DH-ts6ho Жыл бұрын

Yeaaaaaah.... that is because you live in the US/Canada (probably). You don't have this kind of option in other countries.

@DH-ts6ho Жыл бұрын

@@BerserkSurvival Question: Where do I find more information regarding CNC parameters and differences/uses between models? Won't a Shapeoko CNC work, as well?

@ianbryant Жыл бұрын

PCBs are so overrated. Just use perfboard.

@MahdiDesigns Жыл бұрын

Awesome work and thanks for shouting out my design! It's definitely not easy designing a compact bionic hand but you really did a great job and encountered many of the same challenges as I did. That's an especially challenging project if you were learning CAD at the same time. Your sense of humour and editing skills are 👌😁 I'm not working on my design anymore but fortunately just starting working with a Startup company designing prosthetic arms

@UltimatePerfection Жыл бұрын

Really handy video. I really appreciate how awesome you are as a youtuber and engineer. You didn't need anyone to give you a hand, you did all yourself. Hands down, a very amazing piece you made here.

@oystercatcher943 Жыл бұрын

I think what you did was really great, and I love your sense of humour

@The-Stitch 7 ай бұрын

And y'all just got rick rolled

@AshutoshDang Жыл бұрын

That's awesome ... the way you are presenting better than many movie scripts.. keep up the good work ...

@MrJoegotbored Жыл бұрын

Your editing is on point and your writing is excellent. If you don't get a gig at Boston Dynamics, you should consider an open mic.

@juanit0tackit0tackito2 Жыл бұрын

@ShignBright Жыл бұрын

@@juanit0tackit0tackito2 Not to be rude towards your religion, but this is completely unrelated to the discussion at hand. Please take it somewhere else, in the most respectful way possible.

@pauloche9346 Жыл бұрын

Love the humour...great video on how to build a robotic hand. This just shows that with determination one can learn almost anything.

@xdcountry Жыл бұрын

I love the "give it your all" attitude. That hand looks sweet

@bbfire29 3 ай бұрын

10/10 attitude and sense of humour. most entertaining + informative (+ being real) video i've seen out of dozens and dozens i watched. keep doing what you're doing! (also lenovo thinkpads FTW...)

@3hourstime Жыл бұрын

You did an amazing work!

@sukantrai5251 Жыл бұрын

Please don't stop posting , I loved it 😂😂❤️

@TK75_ Жыл бұрын

Ur videos have gotten better (in editing) recently

@filipbochniak3590 Жыл бұрын

As a recent automatics control and robotics graduate, this video resonates with me on a spiritual level

@philosophyman Жыл бұрын

Already love this channel. An actual guide

@denismilinkovic7894 Жыл бұрын

This is pure gold. Subscribed. I learned something and lol in the process.

@amaliamoses_ 2 күн бұрын

This is perfect for an ADHD mind, instead of being distracted and going to watch another video, you distract me so hard that you keep me in this video... what did you do to me!!! So damn cool and counter-intuitive it blows up my mind...

@Baaru 8 ай бұрын

Im so glad the algorithm blessed me with ur channel

@ashes547 Жыл бұрын

Just what I need to start the new year!

@CharlesVanNoland Жыл бұрын

I think that cut-out in the flat of the potentiometer is where something like a woodruff key would go, a little piece that slips in there with a flat on one side to go against the shaft.

@silvrcel Жыл бұрын

Great start and awesome video documenting your progress! I would suggest maybe trying to use off the shelf micro servos for an easier approach. N20 motors would need quite a lot of CAD work to integrate well into a hand. Especially when trying to integrate the potentiometers and PCBs.

@esra_erimez Жыл бұрын

What do you get when you put your hand in a blender? A handshake.

@tahaalbusaidi7579 Жыл бұрын

Bro you’re the goat 🐐, keep pushing it man 🫂

@tateupdates5375 Жыл бұрын

Laughed my arse off and learnt a bunch of things at the same time. Thanks man. 👍

@daudhtm5203 Жыл бұрын

I have had the same soldering kit for about a year now. works grape

@DynestiGTI Жыл бұрын

This video was a roller coaster, love your sense of humor 😂

@almasrafi4102 Жыл бұрын

You did great, humorously done with serious attitude......

@SamLeroSberg Жыл бұрын

THE LEGEND UPLOADED!!!!!!!

@1To1MRobux Жыл бұрын

Your videos are what makes me get up in the afternoon

@mhfs61 Жыл бұрын

It was very amusing to watch and I‘ve also learned something along the way. Thank you.

@azraellive6058 Жыл бұрын

You gave me motivation. THNX

@kavorka8855 Жыл бұрын

Awesome! Just awesome!

@cxob2134 Жыл бұрын

Love the engineering content

@mrstanlez Жыл бұрын

Yes, one solution for soldering is using breadboard. It reduces development time, and changing components. After development you can use custom PCB board and solder SMD components.

@jamawahid9408 Жыл бұрын

Dude, you are a Giga Genius! I like the idea with the fishing line.

@alvilabs Жыл бұрын

Great progress. Good luck 😊

@andybrice2711 Жыл бұрын

I strongly recommend getting a separate tin of soldering flux. I've found it makes soldering so much easier.

@boluwarin Жыл бұрын

I thoroughly enjoyed wacthing this!

@Raster_Rasper Жыл бұрын

This project is pretty great!

@Bruceleekungfoo 5 ай бұрын

Great video and love the humor!

@Post_grad Жыл бұрын

Really good video dude!! It was interesting and funny 😄 hoping to see more !!

@eagleeyesgamingg Жыл бұрын

good channel, even better delivery

@notAnxyte Жыл бұрын

Nobody gonna talk bout the rickroll in background

@kosnk Жыл бұрын

Wow, cool project! Do keep on with robotics!

@jmcbike 8 ай бұрын

That is how my projects go. Refreshing to see what it really takes to build a project.

@sniperboy4281 9 ай бұрын

glad i found this, i have a large project coming up, but no a lot of money and room for mistakes

@luisgomez8563 Жыл бұрын

Don't worry, I don't have a life either, I do a lot of this in my school's robotics program.

@cherokeewarcry Жыл бұрын

All I learned was to buy the Lego robot hand kit if I need a robot hand, but I was very entertained. Subbed!

@ArduinoTex Жыл бұрын

Wow this is as mechatronics as it gets. This is one of the coolest, detailed videos.

@sakurashellshockers Жыл бұрын

This person can become a stand up comedian someday.

@vor6126 Жыл бұрын

You are god's gift to mankind with these technical and editing skillZ.

@yulianislamprayoga 7 ай бұрын

Keep it up, bro!

@sissimp4 5 ай бұрын

*clicked because of robotics, stayed for the humor 😂*

@smickforcosplay7604 Жыл бұрын

your sense of humour is fantastic, cant stop laughing, cool hand btw

@deliciousnoodles5505 Жыл бұрын

My man is back!~

@RED5AND Жыл бұрын

Mate...... your a legend

@XYZYX789 Жыл бұрын

Lol u are like a mix of dani and glarses, i like the humor!

@CasMcAss Жыл бұрын

very good thank you mister IQ man

@objcactus2876 Жыл бұрын

GLARSES TRANSITIONS!

@dragosh7817 Жыл бұрын

You did an amazing job I would also like to repeat this project if I had more free time

@normancoc1832 Жыл бұрын

Awesome 👍

@ZZZXIIIXZZZ Жыл бұрын

great video, this is channel is very underrated

@lyrebirdinusa Жыл бұрын

Agreed. It does not happen very often that I am laughing out loud watching videos, and this video made my day!

@RanjSinha Жыл бұрын

You Missed Such A Golden Opportunity At The End To Flip Us Off

@georgeklimov3464 Жыл бұрын

The return of the king

@bestiamangiabambini346 7 ай бұрын

Brother this Is one of the best video on elettronic that i have ever seen. really (Sorry for bad english)

@spiggensengineering1963 Жыл бұрын

That's some good soldering

@CrokyBoiEditz Жыл бұрын

Bro the fucking ChatGPT bit hit hard cuz that shit felt so relatable.

@rockandrolldevil665 Жыл бұрын

awesome video, man

@maverickstout25 Жыл бұрын

Siiick, more, more!

@chaokhoekhong Жыл бұрын

You have a good sense of humor !

@tedned1479 Жыл бұрын

Wooo another upload!!!

@astroweeb 4 ай бұрын

Great video and humor!

@harrynawaz2063 Жыл бұрын

Time well spent mate, time well spent.

@_next223 Жыл бұрын

i respect this level of dead inside. you are prepared

@bm_hamim Жыл бұрын

you earned a fan

@tonyroaster5749 Жыл бұрын

randomly found this channel it is good I am subscribing it

@Jonathan-ru9zl 11 ай бұрын

Keep going. excellent work ✔✔

@rxbbdoesmusicsometimes Жыл бұрын

You are so funny, keep on making these amazing videos!

@kingofthecrows8802 Жыл бұрын

Instead of jumping straight to soldering all your components together, you should've soldered your lead wires from the components and connected the leads through a breadboard to ensure that your wiring was correct and that all wire connections made to the components were done securely without damaging the component itself. All in all, don't be disheartened by your mistakes, be glad that you not only learned from them but were able to teach others about how you set out to learn by doing. Great video, subbed.

@erikschmidt2571 Жыл бұрын

Every single bit of this is relatable

@prisixix Жыл бұрын

Love the video!

@Cambodian_Tech_Review Жыл бұрын

you inspired me, love your work and meme.

@Elcomedordepan 9 ай бұрын

i can relate to that first prototype.

@SamLeroSberg Жыл бұрын

it's 2023 and he uploaded. Hallelujah Dio.

@malcolmmcgrath9344 Жыл бұрын

well done!

@thatwannabe98 Жыл бұрын

5:06 nice soldering

@juliansantos1900 Жыл бұрын

Tips for soldering ic just solder the 4 side first so your ic will be tight enough

@lod4246 Жыл бұрын

1:43 Loving your influx of new content so far.

@Cobrax_x Жыл бұрын

I did one of those for a school project, it wasn't very good though. It hardly could hold a water bottle reliably and I used buttons to activate each finger.