No video
Building a sliding barn door t.v stand
Рет қаралды 32,047
Күн бұрынCreated with Wondershare Filmora
Hope this inspires some of you to build your own. Enjoy!
Facebook:
/ kgwoodworking218
Instagram:
/ kg_woodworking
music: Cold Funk - Funkorama by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommon...)
Source: incompetech.com...
Artist: incompetech.com/
@Jordanwoodworking 4 жыл бұрын
The t square trick was clever. I may try it
@AbamAdy 6 жыл бұрын
turn out gorgeous
@MrGig128 6 жыл бұрын
Ady Unixmoment thank you... appreciate it!
@tamaraleitte6656 4 жыл бұрын
Wow so talented! Great job!
@lunalovesroblox1212 6 жыл бұрын
Great job
@Baddscorpio 6 жыл бұрын
Very nice...
@amendez3505 6 жыл бұрын
Really nice job. I am learning myself and have built one similar. I could not find hardware that was affordable and small enough for my doors. Also my door kind of angle forward. Did you use any bottom rail to keep your doors level as the slide and not lean back or forward? Thanks
@MrGig128 6 жыл бұрын
+Alejandro Mendez yeah the hardware is pretty expensive. The kit I got came with a bottom guide that I didn't end up using. The doors swing alittle but not enough to do anything about. Maybe the part that mounts to your door is bent and that is what's causing it to push out?
@jonbishop1385 3 жыл бұрын
Sounds as if your floor is out of level? which would cause the unit to lean foreword and the doors to hang out slightly ? , so on the front just make 2 shims the correct size until the doors hang correctly , You can do this by using a couple of wedges so you can estimate the size of your Shims
@TheWeekendDIYer 6 жыл бұрын
Nice piece! I just started my own channel. I just subscribed to yours. You have great content!
@MrGig128 6 жыл бұрын
+The Farmhouse Addiction thank you very much, I appreciate it. I am glad you enjoy it!
@lfuentes4098 5 жыл бұрын
It's beautiful. Can you share what stain color you used? Sorry if I missed that part. Also could you share where you got your hardware? Thank you!
@MrGig128 5 жыл бұрын
I believe I used Early American stain and I got the hardware from Amazon! Thanks for watching!
@shantelfullerton9865 3 жыл бұрын
Woodglut is nice for that.
@PatrickBlurton 5 жыл бұрын
Question! Did you mix the Polycrylic with anything before putting it in the HVLP sprayer or pour it straight from the can?
@MrGig128 5 жыл бұрын
Straight from the can
@hankandrox Жыл бұрын
What’s the total cost of the build? If you were making it for someone else what would you charge
@MrGig128 Жыл бұрын
One million dollars 🙂
@matthewwright4188 4 жыл бұрын
What kind of wood you use to make the top?
@trickyvicky371 4 жыл бұрын
Can you use the iron on banding on the doors as well?
@MrGig128 4 жыл бұрын
Yes you could if you are using a plywood for the doors...if you are using solid wood there is no need for the banding
@terrymulgrew9885 6 жыл бұрын
do you have plans for this great project?
What the Meowk!
Рет қаралды 9 МЛН
Red Poppy Ranch
Рет қаралды 159 М.
CREATIVE COUPLE
Рет қаралды 63 МЛН