Рет қаралды 1,310
This took me longer than I’d like to admit lol. Hopefully this helps you out with your build! Launch and recovery video coming soon! Build Sheet below.
Shoutout to @soflorclife6970
Materials
Home Depot
- Angle Aluminum - 3/4 in x 96 in 1/20 in Thickness
- Flat Bar Aluminum - 1/2 in x 36 in 1/16 in Thickness
- Aluminum Sheet/Sheet Metal - 6 in x 18 in 0.025 in Thickness
- Threaded Rod - #8-32 x 36 in
- #8 Machine Hex Nuts
- #8 Lock Nuts
- Flat Washers (Optional)
eBay
- Wheels - Diameter 68/52mm (With/Without Tires) Width 26mm Mount 12mm Hex www.ebay.com/i... (any 1/10 scale rally car/offroad car wheels will most likely be fine)
- Foam Tape - 15mm x 5mm 3mm Thickness www.ebay.com/i...
- RC4WD Scale Aluminum Diamond Plate store.rc4wd.co...
Harbor Freight
- Rivets - used mostly 3/32 in and 1/8 in, some 5/32
- Epoxy (any is fine, I used Platic Weld)
Tools (Some are optional - all can be found at Harbor Freight)
- Drill
- Drill bits (3/32 in, 1/8 in, 5/32 in or whatever size your rivets are)
- Hand Riveter
- 7 in Diagonal Cutters
- Rotary tool
- 8 in Flat File
- Measuring Tape
- Mini Spring Clamp Set
- Clamp
Hopefully I'm not missing anything. If you have any questions, ask away in the comment section! Thanks for watching, if you enjoyed the video don’t forget to subscribe to Jonny’s Hobbies!