Building an Inexpensive SSQA Remote Control

Building an Inexpensive SSQA Remote Control - Part 2 (

Рет қаралды 11,375

Күн бұрын

This is Part 2 of my SSQA Remote Control project videos. Be sure to watch Part 1 first, then watch all of Part 2 before buying any hardware and starting your build.
Materials:
* ECO LLC 8 Inch 8" 225lbs 0.55in/sec 12VDC Linear Actuator: amzn.to/3thXuco
* 15 Ft 6AN ID Braided Stainless Steel Fuel Line Hose: amzn.to/3Up0aAW
* Waterproof Latching Polarity Reversing Rocker Switch: amzn.to/3thdknS
* GS Power 16 Gauge Wire 100 Ft Two Conductor Copper Wire: amzn.to/3FZCCOM
* 2-Pin Waterproof Electrical Connectors, 10 Pack: amzn.to/3gnE2EE
* Alex Tech 25ft - 1/4 inch Split Wire Loom: amzn.to/3F2qo7e
* Alex Tech 25ft - 1/2 inch Split Wire Loom: amzn.to/3AP7Apk
Recommended Special Tools:
* Crimping Tool for Waterproof Connectors: amzn.to/34fS5K7
* Starrett 18A Automatic Center Punch: amzn.to/3rr6Z9m
Chapters:
00:00 Introduction
00:28 Design Dimensions
01:58 Making the Actuator Extensions
03:09 Assembly & Installation
05:01 Testing the Mechanism
05:56 Wiring the Electrical Controls
06:20 Choosing and Installing the Switch
11:44 Connecting to the Fuse Box
13:05 Wiring to the Linear Actuator
19:21 Testing the Electrical Controls
20:01 Real-world Test
21:12 Final Thoughts & Recommendations
Note: Links to Amazon products are Amazon Affiliate links that won’t cost you any extra, but will help support my efforts with a small commission on qualified products. Thanks for your support!
Visit DIYMyWay.net: diymyway.net/
Follow Me on Twitter: / diymyway
Visit my Amazon Affiliate Store: www.amazon.com/shop/diymyway
#diy #outdoors #tractors #kubota #ssqa

Пікірлер: 110

@watershedoverlook Жыл бұрын

This has been a GREAT project to follow along with Martin. What a great idea, design and execution. Really excellent work!!! 👍😎👍

@DIYMyWay Жыл бұрын

Thank you Chris! Much appreciated!

@ricksandyfox Жыл бұрын

This is brilliant! At 70, I enjoy jumping on and off the tractor less each day. I may jump into this project myself when my own voice-activated SSQA remote no longer works! (He's 8 now, and in a few years, I may become the remote while he is in the seat!)

@DIYMyWay Жыл бұрын

Thanks Rick! Your voice-activated SSQA remote is what’s brilliant! LOL!

@MyClutteredGarage Жыл бұрын

Brilliant mod and fab, Martin! Great idea to use the braided fuel line as conduit. Thanks for sharing!

@DIYMyWay Жыл бұрын

Thank you Ed! Actually, my wife suggested the braided fuel line. I was explaining what I was looking for and she happened to have her iPad in her lap and did a quick search on Amazon then showed me the fuel line and asked if that would work. Turns out it was the perfect combination of protection and flexibility I was looking for. Yep, she’s a keeper!

@tbrenner2374 3 ай бұрын

Really nice job! I appreciate your attention to detail and thorough explanation - thank you 🙏

@peacefieldfarm_mn Жыл бұрын

This is by far your best modification yet. Excellent work, Martin!!! Thanks for always making such great videos! Cheers!

@DIYMyWay Жыл бұрын

Thank you kindly! I admit I’m pleased with how well it works.

@PapaRug.58 Жыл бұрын

Great video and now I want one for my old tractor have the ssqa already

@lcee6592 Жыл бұрын

Awesome project! I get tired of climbing on and of the tractor changing attachments. This is must do project! Thank you sir for sharing all the information on this power lever control. I will be smiling every time I flip the switch! 😊

@DIYMyWay Жыл бұрын

Thank you! Me too. This project has been percolating in the back of my mind for a while and I’m glad I finally decided to do it.

@donaldslate4195 Жыл бұрын

Check out Outback Wrap for some protection on hoses, wires.

@dwayneloftice2326 Жыл бұрын

Outstanding solution very detailed instructions, Martin. I currently own four front implements changing them often. But, my near 75 YO knees aren't as "playful" as they use to be. This is now on my ToDo List! Thanks!

@DIYMyWay Жыл бұрын

Thank you, Dwayne! With four FEL implements, you need this more than I do! I just have the bucket and forks now, but I do see the potential for getting more. Good luck with your project and thanks for watching!

@ticklemeorange8328 Жыл бұрын

Such a great idea, and seems to work well.

@MarkChristopherpens Жыл бұрын

Totally agree, overkill is better than underkill! If u have the opportunity, over engineer now rather than repair later! Cheers from Nova Scotia :) Mark

@DIYMyWay Жыл бұрын

Great minds think alike, Mark! Thanks for watching!

@terryk3118 Жыл бұрын

I like that nice clean installation.

@DIYMyWay Жыл бұрын

Thanks, Terry!

@D70340 Жыл бұрын

Wow, GREAT videos! You are one of the best on youtube without a doubt. THANK YOU so much for sharing your DIY SSQA MOD, this is EXCELLENT! My problem with it is, you cost me money every time i watch one of your videos, lol. 🤔😊👍

@DIYMyWay Жыл бұрын

Thank you! That means a lot coming from one Retired OldMan to another. 😁 Always happy to help you spend your retirement nest egg! Thanks for watching!

@GrampiesWorkshop Жыл бұрын

How's she goin'? This is a 'sweet' mod for sure. Being able to change implements without having to dismount is a game changer. Nice mod Martin. Nice install too. Take care!!!

@DIYMyWay Жыл бұрын

Hi Mike! Yes indeed it is. Thanks for watching and for your kind and encouraging words

@markcole6475 Жыл бұрын

Great video! I ordered the actuator and rocker switch! Worth a try imo ….Even tho the quick attach system makes swapping equipment easy I still hate getting up and down from the tractor multiple times in the process… I keep my tractor in a garage also …out of the weather!

@DIYMyWay Жыл бұрын

Thank you, Mark! Good luck on your rendition of the project!

@LouisianaTractorworks Жыл бұрын

You a awesome job with the build and going over everything you would need to make your own. Thanks Martin! Have a good week! See ya!

@DIYMyWay Жыл бұрын

Thank you, John! Hope you have a good week too!

@ItsaboutMakingnotBuying Жыл бұрын

Well done Martin! Life on the tractor just got more easier. Later

@DIYMyWay Жыл бұрын

Thank you Mech! Looking forward to seeing your version!

@tractortalkwithgary1271 Жыл бұрын

That automatic center punch is the cats meow Martin.

@DIYMyWay Жыл бұрын

It sure is, Gary. It’s a Starret and I highly recommend it, but it’s not cheap. I got mine for about $35 a couple of years ago. Last I checked, they’re $43 now.

@tractortalkwithgary1271 Жыл бұрын

@@DIYMyWay , the only thing that has gotten cheaper in the last 2 years is quality.

@DIYMyWay Жыл бұрын

@@tractortalkwithgary1271 Sad but true, Gary!

@jasonjackson6055 8 ай бұрын

I noticed this very same thing. I need one of these in my life. I am a sucker for a good tool...

@ngiovas Жыл бұрын

Well, I know what I will be working on next Spring 😀. Another fantastic video Martin. I really appreciate the time you put into each of your videos.

@DIYMyWay Жыл бұрын

Thank you Nick! I appreciate your kind words because this video took a LOT of time editing to complete. Thanks for watching!

@scottyb4606 Жыл бұрын

Good video on a great job, Mr Martin. I just completed a similar modification on my forklift so I can ride in the manlift for various tasks. Keep up the good work

@DIYMyWay Жыл бұрын

Thanks Scotty!

@OrangeismyNewGreen Жыл бұрын

Very professional installation video Martin, works like a charm 👍🏻. Have a great week 🙂🙋🏼‍♂️👍🏻

@DIYMyWay Жыл бұрын

Thanks, Luc! You too!

@phattdaddy63 Жыл бұрын

TO: Mr. & Mrs. Martin From: Central Virginia Have a Blessed CHRISTmas and a Happy New Year!

@DIYMyWay Жыл бұрын

Thank you Kenny! I hope you and your family have a Most Excellent Christmas and a Splendid New Year!

@MannistoCay Жыл бұрын

Nicely done! Another project to look forward to doing.

@z135210 Жыл бұрын

I'm definitely going to make this after I follow your LED light guide first! I have a l3901 and this is perfect!

@DIYMyWay Жыл бұрын

Glad you’re finding my videos helpful! Thanks for watching!

@danielperez-wu6qq Жыл бұрын

that was genius, great job.

@davidcharles3131 Жыл бұрын

Another professional project. Thank you for sharing.

@DIYMyWay Жыл бұрын

Thank you David!

@bigtoon8300 11 ай бұрын

Really great tutorial! Glad I found your channel, thank you!

@DIYMyWay 11 ай бұрын

Glad it was helpful! Thanks for watching!

@tractortalkwithgary1271 Жыл бұрын

Martin... You are handier than a pocket in a shirt! Full watch and a thumbs up!👍

@DIYMyWay Жыл бұрын

LOL! Thanks Gary!

@lifeoftravel548 Жыл бұрын

Soo Really Nice and Really Beautiful! Stay Connected!😍😍😍🤗🤗🤗

@jesse1247 Жыл бұрын

Elegant installation

@RCAFpolarexpress Жыл бұрын

Bonsoir Sir 👍😇You have install your SSQA Remote Control Very Well Sir 😇👍💪 Your electric bundle wiring are very well protected and also very well installed Sir 🧐👍 OUTSTANDING Sir and Have a Very Nice Week End Sir Cheers 🍻🍻

@DIYMyWay Жыл бұрын

Bonsoir Dave! Merci beaucoup! I hope you have a wonderful week too!

@CCWbuilt Жыл бұрын

What a great idea. I will definitely make this a reality on my new Bad Boy 4025 Tractor...along with several other great ideas you have on your channel. Thanks for taking such care to produce quality DIY videos. Always enjoy watching and learning.

@DIYMyWay Жыл бұрын

Hi Christian! Glad my videos are helpful to you. Thanks for watching!

@thecompetentman1 Жыл бұрын

I've been following this project closely. You definitely have inspired me to install an automatic release for my quick attach. I however have a set of third-function hydraulic ports on my loader with operating switches on my control stick. Going to try a hydraulic cylinder instead of the linear actuator. Wish me luck.

@DIYMyWay Жыл бұрын

You may want to consider sticking with electric with a switch on the dashboard because it seems it would be too easy to accidentally push one of the loader stick buttons and release the SSQA. Just a thought. Good luck and thanks for watching!

@michaelmcclure1835 7 ай бұрын

My only suggestion is to use dielectric grease to all the connections even though you used the waterproof connectors. Just gives an added measure of corrosion protection.

@hollandduck79 Жыл бұрын

Hello from the Netherlands . a nice mod . thanks for the video . Sincerely, Hollandduck

@DIYMyWay Жыл бұрын

Hello again, Hollandduck! Thanks for watching!

@davehoward2791 Жыл бұрын

Very, very cool Martin, and a professional, clean install as usual. You should patent this before someone else takes your idea and makes a mint and you get nothing. (Just a suggestion, lol.) One of your best videos yet and no doubt a lot of your viewers will be adding this useful and convenient upgrade to their machines. Thanks for the great content, have a blessed day! 👍😊

@DIYMyWay Жыл бұрын

Thank you for your encouraging words, Dave! Much appreciated!

@martyb3783 Жыл бұрын

That is a very cool project Martin. Well done. I will add that one to my list. Currently I only have a bucket and have never removed it. I have my eye on a pallet fork in the future however. Great video as always!

@DIYMyWay Жыл бұрын

Hi Marty! Thank you kindly! Yes, definitely get a set of pallet forks. You’ll wonder how you ever got along with out them. Thanks for watching!

@glm777 Жыл бұрын

What a great idea and very comprehensive video. I love it all. This has jumped to the top of my list for tractor mods. Well Done!!!

@DIYMyWay Жыл бұрын

Thank you very much!

@lonniechartrand Жыл бұрын

Thanks for taking the time to do this detailed and well explained video!

@DIYMyWay Жыл бұрын

You’re welcome, Lonnie!

@craigmitchell9555 Жыл бұрын

This was a great project. I will probably do the same for my 525 FEL. Have you ever considered adapting a hydraulic cylinder to change the spacing on the front forks without having to leave the operators seat? The front hydraulic capability is easily attached the bucket control via a bolt on hydraulic block and is not expensive to add to the tractor. What do you think? I enjoy your projects, I have watched many of them. I like the way you explain how you do things "my way"....

@DIYMyWay Жыл бұрын

Thanks, Craig! No, I don’t have to move the fork spacing often enough to justify such a project. I simply raise the FEL up and tilt the forks down a bit and positioning the forks is easy. So glad you enjoy my videos! Thanks for watching!

@MJADoingStuff Жыл бұрын

Very well put together Martin😁👍You’re video’s are great I always learn something watching you work. I think this project is one of the most convenient mod of all time!!! Thanks for the video. 😁👍🚜💨🍳

@DIYMyWay Жыл бұрын

Thank you Mitch! Glad you liked it!

@kblalock7934 Жыл бұрын

Great job!!

@theoriginalbubba1036 Жыл бұрын

Brilliant! Hope you and yours had a great Thanksgiving.

@DIYMyWay Жыл бұрын

Thanks, Bubba! We did and I hope you and your family did too.

@user-oj1ez5wr6d 4 ай бұрын

Looks like I have a rainy day project for my Branson! Great videos!

@DIYMyWay 4 ай бұрын

Good luck with your installation! Thanks for watching!

@jimmcknight3021 Жыл бұрын

When we got our Grand L a few months ago we just had the dealer add the hydraulic power ssqa. On our switch, it has to be held down in order to cycle through. It is actually two switches that have be pressed while it works. That's the only thing that don't like about it. However, it sure is nice not to have to get off the tractor and mess with the handles.

@DIYMyWay Жыл бұрын

Sounds nice, Jim. I imagine it was a pricey add on, but especially worth it if you have a cab tractor. Thanks for watching!

@jimmcknight3021 Жыл бұрын

@@DIYMyWay It is is pricey but it was a family purchase. A lot of money down and we were one the last customers at t h e dealer to get approved for true 0 percent financing for 84 months for the remainder what we financed.

@earlyriser8998 Жыл бұрын

fantastic video and great idea

@DIYMyWay Жыл бұрын

Thanks!

@MrPabco Жыл бұрын

Sweet mod Martin. Thank you for all the documentation and explanations. Will get ready for a springtime run at this myself. As a retired electrician I'd be interested to know if that EMT can stand up to time, or if IMC might be a better choice. Cheers.

@DIYMyWay Жыл бұрын

Thanks Paul! I don’t think the EMT is under much stress or strain and it stays out of the weather so I think it will hold up. Time will tell. Thanks for watching!

@klpittman1 14 күн бұрын

Very nice mod!

@DIYMyWay 14 күн бұрын

Thanks!

@98_ksxj Жыл бұрын

Maybe I missed it. But was there a reason you used the metal plate instead of connecting the conduit directly to the arms?

@DIYMyWay Жыл бұрын

Yes there is. You can’t drill a 1” hole in that small of a diameter conduit, even if it was crushed flat. Thanks for watching!

@RJScott Жыл бұрын

How is the actuator holding up? Thanks for a great how to video.

@DIYMyWay Жыл бұрын

It’ still working perfectly. Bear in mind I don’t use it everyday. Two or three times a month AND my tractor is stored in my shop. I used it three days ago to switch to pallet forks. If you plan to use it a lot more or you keep your tractor outside, you’ll need to spend more that $42 to get a tougher actuator. Thanks for watching!

@RJScott Жыл бұрын

@@DIYMyWay I just got my Kioti CK2610 and the loader has a pin in the place where you have a bolt. I wish I could post a picture of it and get your thoughts.

@DixieNormous1 6 ай бұрын

Well I have an update. I got mine working on my bobcat t450 took me a few hours today.... I ended up buying a 400 lb thrust unit on Amazon for $156.. take 6 seconds to open and 6 seconds to close...

@DIYMyWay 6 ай бұрын

Eggcellent! Congrats! It spoils you quick. I’d never want to go back to manual operation.

@DixieNormous1 6 ай бұрын

@@DIYMyWay me neither, Thanks for the video,yours is the best one available anywhere I looked.

@nicholasgendreau1297 7 ай бұрын

Awesome. Can you still do it manually if the actuator failed.

@DIYMyWay 7 ай бұрын

Thanks! Yes, I designed it so it can be quickly taken off if it fails and easily replaced.

@jamesweeks7942 Жыл бұрын

i followed along and bought the actuator. was wondering if you have had troubles with it as mine just burnt out. going for warranty, spoiled now

@DIYMyWay Жыл бұрын

Sorry to hear that James! Mine is still working fine so far, but for $43 I don’t expect it to last forever. Thanks for the visit!

@jjfore0921 11 ай бұрын

Any update on the actuator? Is it still working?

@DIYMyWay 11 ай бұрын

Yes it is and it gets used pretty often. I’m sure keeping my tractor in and insulated humidity controlled shop helps its life expectancy. Thanks for watching!

@brandonschudlich1497 4 ай бұрын

Hi there. So this has been in use long enough im assuming. How has it worked out for you? Have you made any changes to it?

@DIYMyWay 4 ай бұрын

Hi Brandon! It’s still working perfectly and I have not made any changes to it. It’s been SO convenient to be able to stay on the tractor to switch between bucket and forks. Thanks for watching!