Building an RTX 3080 Gaming PC! Ft. Zotac Trinity + Corsair 4000D

Рет қаралды 1,080,672

Күн бұрын

Building an RTX 3080 Gaming PC! Ft. Zotac Trinity + Corsair 4000D
⇨ Sponsor: Team DARK Z DDR4 Memory | bit.ly/PHTeamQ3
Here's my latest Gaming PC Build, featuring several new parts -- Zotac's "Trinity" version of the NVIDIA GeForce RTX 3080 graphics card, as well as the Corsair 4000D Airflow case and iCue H115i Elite Capellix AIO liquid CPU cooler.
► PARTS LIST
▷▷The ~$1500 Version:
AMD Ryzen 7 3700X 8c/16t CPU - geni.us/MnI4
Zotac RTX 3080 Trinity Gaming OC Graphics Card
www.zotac.com/product/graphic...
MSI MAG B550 Tomahawk AM4 Motherboard - geni.us/H7LtCd
G.Skill Trident Z RGB 16GB (2x8GB) DDR4 3600 Memory - geni.us/Qcyu
Lexar NM610 1TB NVME M.2 SSD - geni.us/nBWdj
Corsair 4000D Airflow Tempered Glass Case - geni.us/jcJ30L
Silverstone Essential SST-ET750-B 750W 80+ Bronze PSU - geni.us/Ul0k2q
▷▷ Alternative/Extra (More Expensive) Parts I Used Today:
AMD Ryzen 9 3950X 16c/32t CPU - geni.us/A3jGmo
Corsair iCUE H115i RGB Pro XT 280mm AIO CPU cooler - geni.us/vMB75
Corsair Dominator Platinum RGB 32GB (4x8GB) DDR4 3600 - geni.us/6mjyBlk
Corsair RM850X 850W 80+ Gold Modular Power Supply - geni.us/FbqHxz
Corsair Ql120 RGB 120mm RGB LED Fan Triple Pack - geni.us/zjbr2Uf
Hardware Canucks - Dmitry’s Corsair 4000X Case Review - • They're BACK - CORSAIR...
GamersNexus - Availability & Supply of NVIDIA RTX 3080 Video Cards - • Report: Availability &...
►TIMESTAMPS
0:00 Intro
0:42 RTX 3080 Availability, HWC and GN video recommendations
2:14 The $1500 version of this buildvs the RGB version
3:01 PARTS FOR THE BUILD
8:38 Corsair 4000D Case - First Look
13:26 Core Components - Motherboard, CPU, Memory, SSD
15:02 Planning Out the RGB Fans and Connections
16:39 Installing Fans, Motherboard, PSU
17:08 AIO Cooler Installation Woes
20:57 Resuming The Build - Final Steps
22:41 Wiring up the RGB LEDs + Cable Management
24:51 Graphics Card Installation
25:20 Build Complete - First Power On
27:00 Closing Thoughts, Sexy B-roll, Outro
Please note that links above may be affiliate links -- clicking them earns me a small commission if you make a purchase and helps support my KZfaq channel. Thank you!
▷ MY STORE - shirts, mugs, pint glasses & hoodies
paulshardware.net
▷ SOCIAL
Twitter: @paulhardware
/ paulhardware
Facebook:
/ 195425877329550
Instagram:
/ paulhardware
:::Send Me Stuff:::
Paul's Hardware
P.O. Box 4325
Diamond Bar, CA 91765
► Edited by Joe Aguilar - ShaostylePostProductions
/ joe_editing
Audio file(s) provided by Epidemic Sound
www.epidemicsound.com/

Пікірлер: 1 500

@paulshardware 3 жыл бұрын

► TIMESTAMPS Sorry for the delay with this one guys, I hope you like it though! 0:00 Intro 0:42 RTX 3080 Availability, HWC and GN video recommendations 2:14 The $1500 version of this buildvs the RGB version 3:01 PARTS FOR THE BUILD 8:38 Corsair 4000D Case - First Look 13:26 Core Components - Motherboard, CPU, Memory, SSD 15:02 Planning Out the RGB Fans and Connections 16:39 Installing Fans, Motherboard, PSU 17:08 AIO Cooler Installation Woes 20:57 Resuming The Build - Final Steps 22:41 Wiring up the RGB LEDs + Cable Management 24:51 Graphics Card Installation 25:20 Build Complete - First Power On 27:00 Closing Thoughts, Sexy B-roll, Outro

@targettmark88 3 жыл бұрын

woohoo been waiting for your new build videos , excited :) :) :) THANKS PAUL

@4kPcGaming 3 жыл бұрын

Same mess will happen with 3090 aswell ?? 🤔🤔🤔

@rurutuM 3 жыл бұрын

that Zotac box is so pretty, can u send me the box plz

@mitchtoaster 3 жыл бұрын

That's a good looking PC. Great vid

@19Photographer76 3 жыл бұрын

Are those nipples called a Nub or Nib? I've called them a Nib for 20 yrs? Like a fountain pen Nib. A Nub refers to a person that's a 'Nub' or the ID of a baby ultrasound sex.

@TheScholesie09 3 жыл бұрын

Corsair RAM conflicts with Corsair AIO and Corsair fans, when mounted in Corsair case. You can't make this up.

@TheGauges420 3 жыл бұрын

Only in this case I'm sure, at least with a 280mm AIO as opposed to an H100i I'm sure would fit NO problem.

@trimat2016 3 жыл бұрын

@@TheGauges420 I had exactly the same problem with a Corsair case a couple of years ago. Unlike Paul I couldn't just swap in some different RAM. I have the radiator jammed in and hanging off one screw. Really poor design by Corsair. The cases need to be 10mmm taller so that the cooler doesn't overlap the motherboard. I won't be buying another one of their cases!

@draco89123 3 жыл бұрын

@@trimat2016 A lot of these compact cases could be like 20mm taller and longer and it'd fit nearly any consumer level radiator with ram vertically, and these super long 3080s horizontally. The next step up gets so big you might as well put a reservoir to fill in the dead space.

@NamanaCh 3 жыл бұрын

The manual for the case specifically says you need low profile memory for a 280mm AIO. These manuals are also available online so you can check before buying. No real excuse.

@turavin 3 жыл бұрын

I had the same problem with Case 275r, H110i and memory vengeance. The SAME problem.

@regardie99 3 жыл бұрын

Paul from Paul's Hardware: "What''s up, guys? I have a huge pile of hardware..." End credits.

@TheWayOfShawn 3 жыл бұрын

Solid Build. Always love hanging around and watching you make builds, Paul. It's super soothing and it helps me build up my knowledge on PC Building!

@andrewwmitchell 3 жыл бұрын

Thanks Paul. I really appreciate you showing us the bad things along with the good. Mounting that CPU cooler, what a pain! The result looks great.

@jackjohnson8305 3 жыл бұрын

Ah a build video, haven't watched one in a while after building my first gaming PC, gotta stay strong in the fundamentals and not get rusty so thanks for uploading this paul.

@jedipenguin2641 3 жыл бұрын

I dont like the term build. It really should be assemble.

@thatpenguinate 3 жыл бұрын

@@jedipenguin2641 Correction it should be called ** mom its time for me to build some legos**

@HistoryMike86 2 жыл бұрын

Paul thanks for your entertaining and informative videos. My brother just did his first build and I'm putting my parts list together for my first build. We both have used your videos to guide us through the process. Keep up the good work!

@rorytaylor626 3 жыл бұрын

You have a really balanced delivery style where I don't think it would be overwhelming for a computer novice, but also not boring for a more experienced person. Just wanted to give you props for that, nice job.

@kumisz2 3 жыл бұрын

The case is really Meshify C-esque with a bunch of improvements, I love it. I hope these smaller cases become a trend.

@Kimmyvlog515 Ай бұрын

4000D 4000X PC case is the affordable alternative version of HYTE Y70. I bought and DIY installed a perfect fitted touch screen monitor from Amazon to display the CPU GPU temperature datas, The effect exceeded my expectations. With this fancy monitor, I believe i will use for years.😂

@ArtMazur 3 жыл бұрын

Thanks for the video. That case is really nice. I ended up picking up the same one. Corsair needs to release and Airflow RGB version, as not everyone wants the glass panel obstructing airflow through the case.

@alexkaneaster2165 3 жыл бұрын

THANK YOU for making this video. This is very similar to the build I was only days away from putting together. I had no idea my Dominator Platinum would be a problem. Moving the build over to a Lian Li Dynamic XL. Holding onto the 4000D for something else since it's a great looking case. Long time fan, thank you Paul.

@petes5152 3 жыл бұрын

Although I've seen Paul build several machines, I'm always surprised by how much of a legend he is when he's done. Good work my dude.

@haydenvaughn00 3 жыл бұрын

CORSAIR: The BEST lighting in the business. Also CORSAIR: The WORST cables in the business

@jamesm568 3 жыл бұрын

And RAM.

@TheGauges420 3 жыл бұрын

@@jamesm568 their RAM is great, what do you mean?

@jamesm568 3 жыл бұрын

@@TheGauges420 I disagree as there's nothing great about their ram. I have sent back so many dead Corsair ram it's not even funny.

@SuperHANGER18 3 жыл бұрын

James M I’ve bought 1 box of ram from them over 2 years ago and It still works like new

@jamesm568 3 жыл бұрын

@@SuperHANGER18 I just don't like corsair's reputation of ram just dying in a year. That's why I switched over to TEAM XTREEM or G Skill ram. Corsair ram is just notorious for dying for no apparent reason. Never have experienced that from cheap ram. Corsair used to be the best but they're not even second best anymore.

@billbollinger3748 3 жыл бұрын

Thanks for the section names and timestamps! Makes it easier if I want to come back and look at specific parts of the build.

@ozziadventurer 3 жыл бұрын

When a KZfaq creator put it in the comment it come up automatically

@billbollinger3748 3 жыл бұрын

@@ozziadventurer its a fairly new feature maybe? I just dont see it very often even on creator timestamped vids. Either way

@deadly_mir 3 жыл бұрын

Its good to have a build video once in a while. Not many people are making them currently because of new hardware releases. Enjoying the content!

@ameliarhodes5000 3 жыл бұрын

My first build a year ago August was your $900.00 option of a build in November of 2018. It was a lot of fun and worked to my expectations. As summer in the South is always as grueling as Winters in the North, I think this is the build for my summer. When I was obsessively watching videos by roughly 4-5 of the most popular builders, Paul's Hardware was the middle path and remained the most sensible IMHO for bang to buck ratio.

@sunraiii 3 жыл бұрын

4:36 - Is that a bent CPU pin? :OO

@awilliams1701 3 жыл бұрын

I watched it 20 times. I can't tell if it's a cloth thread or a bent pin. lol

@kinenbrasil 3 жыл бұрын

looks like a cloth thread because its too long to be a bent pin, and if you can pause the video, you'll see all surround pins are intact.

@bantcliff 3 жыл бұрын

Just paused to come and ask the same question.

@paulshardware 3 жыл бұрын

I saw that too while I was editing! I removed the CPU yesterday and it was really wedged in the socket, I was afraid there was a bent or broken pin but it came out okay and it seemed like maybe a small piece of wood or something was lodged in there. It came out and the CPU still works 😅😅😅

@johnbagley8211 3 жыл бұрын

LMAO, @ 1st glance I thought it was a tiny piece of wood (which is what it turned out to be of course), but then, when he turns the CPU, IT DOES look like a bent pin! That must have freaked him out a bit XD

@DCTexas22 3 жыл бұрын

The availability portion of this video aged well. Didn’t it? Lol

@haydenlangford4017 3 жыл бұрын

Yeah for sure, still can't get your hands on any of this hardware, "sigh"

@michaelman315 3 жыл бұрын

Everything except graphics cards are still fairly easy to find. Just waiting on a 3060 myself :(

@dgvertical 3 жыл бұрын

do you guys know if i can chuck in a z63 cooler instead of the corsair one into this exact case

@joshualambert878 3 жыл бұрын

Still trying to get a 3060 :(

@martinstuart6206 3 жыл бұрын

@@dgvertical I'd imagine so

@1nvalid698 3 жыл бұрын

Thank you for putting this video out, I am a first time builder that is using this exact case and motherboard so this will help out a lot when I eventually get a graphics card and build my system!

@super88trooper96 3 жыл бұрын

This is pretty much my dream build, awesome video Paul!

@stewartmacy4859 3 жыл бұрын

Great live install video. Your work arounds are helpful. Amazing to see such a clumsy cooler connection design in 2020. Cooler, mobo, RAM and CPU engineering need to have lunch and find a standard. And make it simple.

@bretspangler8717 3 жыл бұрын

I always lay my case down to do the CPU's and coolers, gravity will help align those hooks, doing it like you did can produce frustrating results, as you clearly demonstrated, as someone with a bit of a temper I can relate.

@uther10 3 жыл бұрын

Thanks for the build Paul and the caveats with the hardware in this build. The AIO mounting method is interesting.

@Gumbro21 3 жыл бұрын

Man can't wait til next year when there's no stock issues and no bugs found and or fixed. You're helping me upgrade my pc with your videos too. I'll post the before and after on your Twitter Friday

@sooperspeedy 3 жыл бұрын

I'm absolutely in love with the 4000d! I wish I was in the market for a new case, because this is #1 on the list.

@maddawgzzzz 3 жыл бұрын

its 60 bucks.. save a little. its not hard to swap a case dude.

@sooperspeedy 3 жыл бұрын

@@maddawgzzzz why would I buy a new case when the one I have is just as good? I have a meshify c. I don't need to swap my case to this, so I won't.

@supernice_auto 2 жыл бұрын

@@sooperspeedy lol ok clown

@ViperianGaming 3 жыл бұрын

Long Time no see, as always never disapointed

@topphatt1312 3 жыл бұрын

I read that as “long time no see, disappointed as always” and thought why is such a negative comment at the top of the top comments list

@ShortThrowShifting 3 жыл бұрын

I'm building my first PC with all Corsair components myself. Pairing a Strix 3080 OC with a 5900x inside of the 4000x RGB case. My components are nearly identical. So this build was super helpful! Just waiting on my gpu and cpu to ship at this point!

@DBLCreations 3 жыл бұрын

I personally loved the Corsair Obsidian cases! Really beautiful with that metal/aluminium look!

@dakhaleddttv8436 3 жыл бұрын

I can’t be the only one who died of laughter at 19:58

@haydenvaughn00 3 жыл бұрын

Lmao this was so funny

@montyp2000 3 жыл бұрын

Not as much as I laughed at 26:10.

@treygamez1102 3 жыл бұрын

That was definitely user error lmao

@WutipongWongsakuldej 3 жыл бұрын

I did not laugh at all. I was startled because I was just listening while working.....

@StepBroNecro 3 жыл бұрын

It was definitely funnier the second and third time around lmao

@Sinsanatis 3 жыл бұрын

love the look of the case. as soon as i saw it on hardware canucks i instantly changed it to be the case of choice. sad that there isnt a airflow rgb. just airflow OR rgb

@luispineda5517 3 жыл бұрын

Great content as always! Build videos are always welcomed! You used some of the stuff I'll be using on my first build

@acevr8287 3 жыл бұрын

Thanks for the build you’ve earned a new sub

@gnovincejr2 3 жыл бұрын

Awesome video! I would have loved to see a 10900k on this setup. I appreciate a case that allows you to not have to put the 24 pin connector on an angle. Love a case that allows it horizontal perfectly.

@Aliwala69 3 жыл бұрын

I am building the same with i9-10900K and asus motherboard rest is same.

@mrtoasticles7144 2 жыл бұрын

@@Aliwala69 how is the case,

@Kendog Жыл бұрын

Update about the Corsair AIO, they have updated the mounting bracket and there no longer using those hooks but using those brackets similar to asetek uses but with their own design.

@PPacochu 6 ай бұрын

Thanjk you so much for this! Helped me build my PC today.

@sadaantahir5386 3 жыл бұрын

buying this next week, so frickin excited

@mcgwigue7144 3 жыл бұрын

Never clicked on a KZfaq notification so fast

@Joker-no1fz 3 жыл бұрын

hi Paul nice build. i want to be like you when I am less crazy. you are cool. keep inspiring us with tech videos.

@Kdude216 3 жыл бұрын

So glad you built in this case with this card. I want a zotac amp, but wasn't sure if that card would fit when I saw this case pop up online.

@D-Rock986 3 жыл бұрын

Love what you do Sir. Thanks for the new video.

@KillScottKill 3 жыл бұрын

I felt the pain with that mounting setup on the AIO. Fractal's doing that with their new Celsius lineup and I hate it. I bought Asetek's own AM4 mounting bracket off Amazon to get around that.

@mrsmilescam1550 3 жыл бұрын

I have a Fractal celsius 280mm AIO and installion was pretty straightforward. Had to move the drive cage on my R6 and take the front panel off which was a complete pain in the ass.

@billybobs1705 2 жыл бұрын

solution...don't get crappy amd

@cameronkoplin5131 3 жыл бұрын

I clicked on this video and got an LTT pulseway ad... You can say I was confused

@tristanrogers1780 3 жыл бұрын

this is great bcs i was looking at this case and a lot of the components you used so thank you

@Eik44 3 жыл бұрын

Nice build. Happy to see you build again.

@marcuslagergren5632 3 жыл бұрын

"17:08 AIO Cooler Installation Woes" Been there, done that...

@80sman84 2 жыл бұрын

Here is a huge NOTE: For this case, 4000D. If you plan to install a E-ATX mother board. You will need to move the shield in the case back. The screw is hind under the Cables in the back. Remove the screw and then move it back before installing the Motherboard. Example. The EVGA Z590 is a E-ATX board. You have to move it back or it will not fit.

@PesimistzOmbie Жыл бұрын

My graphics card is sitting on the shield as in the video, I was afraid of a short circuit and took it out. looks like there is no problem with the video should i put it back? The cables look bad without it.

@Bragadish3002 Жыл бұрын

@@PesimistzOmbie How is it now?i am planning to buy the same cabinet.can we install the 3rd fan front if we move the hhd slot forward for power supply to have enough space.

@PesimistzOmbie Жыл бұрын

@@Bragadish3002 I am not using hdd slots. 3rd fan installed. You have to be careful with the cabling. The problem I mentioned earlier is caused by the cable pushing the part. If I were you, I wouldn't buy this case right now. You can buy a new series or look at different brands.

@vexmyth0clast 3 жыл бұрын

Such a nice clean black build. That zotac card looks absolutely beautiful. I hope I can get it soon this restock situation sucks.

@opshlds 3 жыл бұрын

Paul! Awesome vid, great content as always!

@alpacarider9623 2 жыл бұрын

For everybody wondering … the maximum size of Ram that fits in this build (considering the h115i) is 44mm. This can be calculated in a rather easy way: The mounting points of the 280mm Aio on top are 5,25cm away from the motherboard. This means we have a clearance of 52,5mm. Considering that the mainboard is lifter by roughly 6mm (+\- 0,05mm) from the back of the case and also the height gain thru the ram slots which is 2mm we are left with. 52,5mm (clearance) - 6mm (mb screws) - 2mm (ram slots)= 44,5mm Let's not forget about the tolerance of the motherboard (mb) screws -> 0,05mm Which lefts us with 44,495mm clearance. The g skill memory is 44mm high and therefore barely fits.

@aussielad26 Жыл бұрын

thanks so much

@alpacarider9623 Жыл бұрын

@@aussielad26 glad that I could help

@aussielad26 Жыл бұрын

@@alpacarider9623 I was quite worried because I already bought all the stuff and this could of been a big mistake but luckily my ram is 42mm

@alpacarider9623 Жыл бұрын

@@aussielad26 Yea, I can relate. It took some research to put the above together. Still wonder why corsair didnt provide that info - Anyways keep me uptodate on your build. And have fun building it :)

@aussielad26 Жыл бұрын

@@alpacarider9623 👍

@juless05 3 жыл бұрын

I'm extremely curious how it would look like if you front mount the AIO. Would give room with the Corsair Dominator and better temps.

@frederickpolk 3 жыл бұрын

Thanks for the video! Hope you and your family are safe and well. :-)

@LeiChat 2 жыл бұрын

Thanks for the video. I would like the 4000D for it's overall dimensions but your video has shown how tight it gets so perhaps the 5000D is a better option.

@justincaro9687 3 жыл бұрын

There’s my 3080 that’s never going to be shipped from Germany!

@olicon1236 3 жыл бұрын

Justin Caro SAME LOL

@TheLessard71 3 жыл бұрын

Same

@olicon1236 3 жыл бұрын

Ladioz zotac is good

@MYKAHMAN98 3 жыл бұрын

Ah and here we are with the cancelations!

@devenchinso 3 жыл бұрын

@@olicon1236 nope. Not right now it isn't.

@KG_BM 3 жыл бұрын

I love how everyone is suddenly getting this case. Perfect timing

@Sinsanatis 3 жыл бұрын

hey i mean u gota admit its a nice looking case. as soon as i saw it i instantly changed to it being my case of choice

@justinespinoza127 3 жыл бұрын

Yea. I love this case

@coryv5679 3 жыл бұрын

Not just sudden... This has been a popular case for a long time now.

@Sinsanatis 3 жыл бұрын

@@coryv5679 but the case released less than 2 weeks ago...

@GTReplayMaster 3 жыл бұрын

Thank you Paul, this was EXACTLY the video I needed to see. Currently running an older H115i but wanted to get this case but heard about ram clearance issues. Thankfully you used the exact same ram (G.Skill Trident Z) that I'm running now so I can continue with my plans and change out the cooler later.

@madararinneganuchiha 3 жыл бұрын

Do you think i can fit nzxt kraken x62 and corsair rgb pro?

@GTReplayMaster 3 жыл бұрын

@@madararinneganuchiha if your ram is shorter than 40mm and you don't have a huge VRM heatsink then probably. If not you can still mount it to the front of the case as ended up doing.

@North47 2 жыл бұрын

Hi Senran, do you still have this case? I'm going to be starting my first build soon and want to go with this case myself. Was wondering if you could confirm whether or not there is enough space for a front mounted 360mm radiator? I know it can take a 280 at the front, and Corsair's site says it can, but I can find any videos or even images of a front mounted 360mm radiator anywhere. Could be just angles I'm seeing it at, but doesn't look like there's enough clearance between the mounting bracket and basement shroud?

@GTReplayMaster 2 жыл бұрын

@@North47 I do, still works great. I also have a 360mm radiator mounted at the front (tubes at the top, no other way works. Possibly why you don't see pictures of it is because the bottom part of the rad is hidden by the PSU shroud

@North47 2 жыл бұрын

@@GTReplayMaster perfect that's great to know, thank you for the reply. I think I've found a video finally with the 4000D case showing a 360mm front mounted. Could be the 5000D, but if it is at least now I know 100% that one will fit. Thank you again.

@Igor-qp3nl 3 жыл бұрын

First time seeing this guy on youtube . Subbed instantly cuz I like him.

@musicalwolf5481 3 жыл бұрын

This case looks so good. I’m thinking of transitioning from a nzxt h510i to this one.

@arminskols1998 3 жыл бұрын

Go for it. I got mine yesterday and it's super nice

@UnknownUser-fg3fs 3 жыл бұрын

Same. NZXT runs too hot.

@somberlain123 3 жыл бұрын

Same, from Antec, getting rid of those aluminium optical drive slot thingys.

@Kevin_Eder 3 жыл бұрын

Corsair hooked Paul up and they just showed off how badly they need to update their components.

@thunderturbine8860 3 жыл бұрын

Jolly good show Paul. Very informative and interesting indeed. Keep up the good work my friend.

@welcometoronsworld6589 3 жыл бұрын

I am glad to see you finally got the CPU cooler pump on sorry that you had to take your frustration out on the laptop but I am glad you got that pump on, and yes Corsair need to find a better solution with that if it was me I would have trashed the entire AIO cooler. But other than that Paul I love the build and the parts you use. Awesome.

@TheErikBallew 3 жыл бұрын

It's about time for me to do another build. But, I've gotta wait to see AMD's announcement first...

@katzicael 3 жыл бұрын

I have this case, and the second I saw you had big ram and a 280mm aio I cackled, I knew what was coming...

@Ejayseejay 3 жыл бұрын

Do you think 240mm would make any different? Genuine question considering I am considering buying the 240mm corsair cooler as well as the same case!

@jonathangaylindo69gachagil18 3 жыл бұрын

@@Ejayseejay as long as its not corsair ram there wont be a problem

@Ejayseejay 3 жыл бұрын

@@jonathangaylindo69gachagil18 dang, I was looking to get the Corsair Vengeance as well haha

@jonathangaylindo69gachagil18 3 жыл бұрын

@@Ejayseejay XD get g.skill it has better latency at a cheaper price

@idkconflict 3 жыл бұрын

@@jonathangaylindo69gachagil18 will the none rgb vengeance Corsair ram fit with a 240 Corsair cappelex aio in this case?

@GodfreyLisk 3 жыл бұрын

Well done Paul. Great build

@McElvisss 3 жыл бұрын

I got a Cooler Master AIO for my build - first time using an AIO - I'm glad you struggle with that bloody mounting mechanism as well! Thought it me being a noob.

@StefanEtienneTheVerrgeRep 3 жыл бұрын

You're missing the key ingredient! No Swiss Army Knife! But at least you had a table!

@Affanbaig 3 жыл бұрын

thermal paste

@Enroxxx 3 жыл бұрын

Did he screw with confidence?

@SonIQBukucuIlberOrtayli 3 жыл бұрын

Whatsup twizzers guy

@masta839 3 жыл бұрын

And no live strong bracelet

@Ceece20 3 жыл бұрын

Anyone see that fabled “restocking” Nvidia mentioned? I haven’t. Been checking every morning and afternoon on the hour. Nothing

@joefigueroa1469 3 жыл бұрын

I just love how he sounds so wholesome

@WhyDidYoutubeDoThis 3 жыл бұрын

The box art on that Zotac card is probably the best thing about it. (including the card)

@nick92065 3 жыл бұрын

The CPU looks like it had some bent pins on it at 4:35.

@MrEditsCinema 3 жыл бұрын

Yep, I noticed that too

@whitekong316 3 жыл бұрын

Yep, Thought he would have said something too.

@chessfan10 3 жыл бұрын

You're right, damn.

@PixelOfDeath 3 жыл бұрын

No, the pins aren't bent. Look at it with fullscreen 4K, it's probably lint

@paulshardware 3 жыл бұрын

I replied to the comment above as well, it was a splinter or a small piece of wood-ish material in between the pins. It's removed and the CPU still works!

@BahnShaps 3 жыл бұрын

Got a question. The 4 8gb sticks... if its going into a dual channel (which I assume that board is) does that affect the performance rather than having 2 16gb sticks in the correct 2 and 4 slots?

@Deukish 3 жыл бұрын

No, the only real difference is that with 2 16gb sticks is that you have more room for future upgrading. Getting 4 sticks like that is mostly an aesthetic choice (4 light sticks instead of 2).

@ILikeWhatILike69 3 жыл бұрын

Doesn't affect performance directly but it could affect stability, and their ability to run full speed with certain motherboards, if the memory is on the QVL list it should be good though. Ryzen is pretty good with memory now, and the next ryzen 4000 series (or 5000 if they decide to call it that) should offer even better memory support.

@BG-iu1mv 3 жыл бұрын

Is better having 2 ram stick me in slots 2&4 rather then 1&2 ?

@BahnShaps 3 жыл бұрын

B G I’m going by mass knowledge tbh, all of the vids I’ve seen for builds (they’re satisfying to watch lol) most people put them in slots 2 and 4 as that’s what it tends to say in the manual. But it’s worth checking if you’re unsure

@raikoh05 2 жыл бұрын

Thank you for illuminating the radiator complication

@smartgorilla 3 жыл бұрын

Yay!!! Breathe man!!!! Need some nice chillout music. I had issues with the wraith and hated it. Then I bought a better cooler as I never felt it was good enough

@pagmanproductions1686 3 жыл бұрын

Imagine not even being able to be compatible with your own products

@user-wyosfr 3 жыл бұрын

that doesnt even make sense what you are saying. Pc parts dont fit with all other pc parts, has nothing to do with brands

@cadodobomb909 3 жыл бұрын

I bet that gpu is having issues already

@rohangharibgard2899 3 жыл бұрын

Why

@nvmTITAN 11 күн бұрын

I got the Corsair iCUE 4000D RGB Mid-Tower Case and it was around 150 at the time but when I got it, it was around 120 this was my first customizable PC so I wanted a nice big case for future upgrades and I am super pleased with this case and would highly recommend it to anybody looking into thisit is super durable and has a nice finish on it along with easy thumb screws to takeoff the tempered glass and the back panel

@aegidaeon 3 жыл бұрын

nice work yet again sir! RGB-cable-count: funny, i'd go exactly the other way round: the way you look at the system is from the glas panel side - so fan 1 would be the top left one - then go the order of reading (which for some countries would be different as well...) :D

@4kPcGaming 3 жыл бұрын

There's my ZOTAC !!! 🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪

@PabzRoz 3 жыл бұрын

The worst built card outa all the 3080s lol

@fabAB912 3 жыл бұрын

@@PabzRoz The much more expensive msi gaming x trio isn't much better either. Asus tuf oc seems to be the best. Check out buildzoid(actually hardcore overclocking youtube channel) review of zotac & msi pcb.

@PabzRoz 3 жыл бұрын

@@fabAB912 already seen it the tuf gaming OC is the best by far. I got one on launch day from microcenter used it for the day and man the performance was insane. wound up selling it on ebay for 2 grand and now im going back to microcenter to pick up a 3090 on launch literally for free. made my money back on the 3080 and enough extra to buy the 3090.

@redgle862 3 жыл бұрын

@@PabzRoz Thanks for being part of the resell problem. At least you're using it to get another card for yourself so not *as* douchey lol

@PabzRoz 3 жыл бұрын

@@redgle862 i originally had no intention of selling it. i got it to upgrade from my 2080. but when i saw how much people were actually selling them for there was no way i was keeping it when i could literally triple my money and end up getting a 3090 for free lol. within 4 hours of posting it someone sent me 2 grand.

@richardjohansen3644 3 жыл бұрын

does anyone know the exact measurements of this case, especially the top? i ordered it with a 280mm aio watercooler with corsair vengence ram and a asus rog strix z490-f. and i am wondering if i can return the ram and fit a g skill ram there

@topomayor 3 жыл бұрын

LOL, that happened to me too, I end up returning corsair vengance Ram and ordered hyperx rgb , still waiting to see if it fits... what did you do?

@richardjohansen3644 3 жыл бұрын

@@topomayor ended up returning the 280mm and getting the 240mm, because no way that would have fit. But Corsair is releasing a new vengeance rgb ram that is shorter, maybe that will fit but idk. Jsyk the ram has to be really short to fit

@topomayor 3 жыл бұрын

@@richardjohansen3644 well tomorrow I will know if it fits , hope it does , other wise I will need to return the aio

@fernandixo8937 2 жыл бұрын

@@topomayor Did 280mm fit with the hyperx ram?

@topomayor 2 жыл бұрын

@@fernandixo8937 It did fit, the aio touchs the ram a little bit, i end up putting 2x16 gb hyperx ram

@swiftlysinking 3 жыл бұрын

Got my shipping notification today! Very Hype!

@michael6187 3 жыл бұрын

Thats clean af

@makwikus 3 жыл бұрын

When a company makes a case, an AIO and memory, and their sizes are incompatible with eachother... I dunno, seems like a major screw up on the company's part. Good job, Corsair.

@renatoigmed 3 жыл бұрын

Also Microsoft make devices that is incompatible with Windows all the time

@jackhole6 3 жыл бұрын

The memory is just for taller cases really. Memory that tall would have issues with most if not all air coolers as well.

@mikebenengtouncry3613 3 жыл бұрын

Does it run Minecraft tho ?

@dynastes4938 3 жыл бұрын

Those are a bit younger than that ;D

@johntamulonis4626 3 жыл бұрын

Great content! Thanks for sharing this great information. You are briliant.

@rumaizanmaidan5835 3 жыл бұрын

Totally lit! I hope you can do with normal Corsair 4000D (non airflow) for next video

@leviathanpriim3951 3 жыл бұрын

Corsair, FFS simplify your RGB cables/hubs this looks awful and out dated

@CincoSnare76 3 жыл бұрын

Lian Li leading the way with RGB fan technology lately.

@bryku 3 жыл бұрын

Man those lian li fans are looking better and better. I have a bunch of Noctua fans, so no RGB on them, but its still 6 cables and it is a pain. I think during my next upgrade I may spurge and get some uni fans... but idk the noctuas are so good. I guess that just shows me how much better cable management (lesser cables) outweigh quality.

@simoSLJ89 3 жыл бұрын

I love the new Lian Li Uni fans, smart implementation. The only problem is that you can't set rpm for each fan, but only for a "pack" of fans. And you can't tell the software to do +/- rpm according to the cpu temperature.

@Grom8P 3 жыл бұрын

Yea.. plus the ridiculous price.

@yohanes2034 3 жыл бұрын

@@simoSLJ89 I think that is fine actually, other brands do not support pwm control at all. Like Corsair, you need to buy Commander Pro if you want to individually control fan speed. At least this unifan allows you to do it albeit just fixed speed settings (quiet, balance, or extreme) and currently does not support a custom curve. Maybe with software update.

@ky2914 3 жыл бұрын

Zotac was the bad choice here, especially after igorslab video.

@mrexile09 3 жыл бұрын

This looks absolutely beautiful

@John.brown.the.baptist Жыл бұрын

NGL, the music for the building bits giving me hella rayman hoodlum havoc vibes

@sickofthestupid1067 3 жыл бұрын

I have bought Zotac MB's twice over the years and both where absolute crap I would never buy anything from Zotac again

@magic_potato1375 3 жыл бұрын

SickOfTheStupid yikes glad that didn’t happen to me ha

@ouki4925 3 жыл бұрын

Why would you pair RTX 3080 with the slow Ryzen processor lol! Every review shows it bottleneck Nvidia's latest cards.

@2011supergamer 4 ай бұрын

Thank you *so* much for NOT showing how to hold the glass panel when taking it off. Really appriciate having underestimated the weight and shattering it on the hardwood floor.

@simonpd38 3 жыл бұрын

lovely job man, looks nice

@fowler0028 3 жыл бұрын

I hope the nubs on that front cover that covers the fan dust filter are as sturdy as you say, I have 2 750Ds(due to incompatibility of the initial batch with my motherboard) at least 1 broke on both cases and I didn’t even touch them apart from initially installing the front fans. Also had the dust filter curve on them, more so on one of them. I like the case but the build quality of that left something to be desired.

@ycageLehT 3 жыл бұрын

Great build, well done. 😄

@ToxiiqqNM 3 жыл бұрын

Building this exact same thing with the rgb 4000x case and a 3700x instead 👌🏻. Just waiting for the packages and getting my hands on a 3080, will be my first build.

@freakinheatinaz 3 жыл бұрын

Great to see you getting back in the biz, you're one of my faves!

@NoButWhyTho 3 жыл бұрын

Just swapped to the white version of this case yesterday. It’s very clean looking.

@BaliAgha 3 жыл бұрын

It amazes me how many youtubers install AIO's or even any CPU cooler vertically, instead of laying the case down flat and having infinitely more leverage to install.