This video is about BUILDING an ULTIMATE RC DRIFT YOKOMO YD-2ZX! This RC drift car build of YOKOMO YD-2ZX and YOKOMO Supra A90 body shell were done by Timmy Woo.
Part 2 will be coming soon!
*Please subscribe to be notified to get my latest video!
Follow me on SOCIAL MEDIA!
Instagram: / timmywoo318
Facebook: / timmywoo318
Twitter: / timmy_woo_drift
*Please note that:
The video shown is not whole setup process.
There are 4 additional washers required, part no. ZC-S37 under the servo( above of servo mount) in order not to bend the main chassis.
The YOKOMO YD-2ZX chassis is only contained chassis itself. Electronic parts and some items are not included in the YD-2ZX chassis package.
The Electronic parts and items that are used in the video are sold separately out of YD-2ZX chassis, including:
1. YOKOMO R160 ESC
2. YOKOMO Zero 3 10.5T sensored brushless Motor
3. YOKOMO SP-03D V2 programmable brushless servo
4. YOKOMO YG-302 gyro
5.Futaba 7PX with receiver
6.YOKOMO YD-2 Rear ESC Mount Set
7.YOKOMO Racing Performer cooling fan
8. Motor Wires
9. Motor and battery connectors
10. Bearing oil
11. RC Car threadlocker (screw glue)
12. YOKOMO spacer shims (For reducing the gap and the movement of control arms, but it should be added without any resistance created between control arms and suspension mount)
13. Team associated black grease (YOKOMO YD-2ZX package includes a plastic bags that injected with black grease)
14.YOKOMO 6 spoke 8mm Rims
15.YOKOMO DRC tires
16. YOKOMO tire mounting tape
17. YOKOMO LiPo 3500 mAh/7.4V 100C battery
18. YOKOMO front and rear magnetic body posts
19. YOKOMO Pandem GR Supra A90 body shell with custom made TW Racing Aeros
*Some NEW features are observed:
1.Flexible high traction graphite double decks as well as light-weighting overall chassis.
2. The chassis side mounting is designed to enable the flexibility of upper deck which has smooth steering feel without interfering the bend of main chassis.
3.The steering servo is mounted on the lower deck to improve the center of gravity.
4. The Z-series gearbox is equipped with a special motor mount and high heat sink, which is featured quick change differential and possibility of adjusting 7 stages of motor positions.
5. By setting the motor to a higher position, the battery can move closer to the rear axle to adjust weight balance without compromising performance.
Some luxurious aluminum parts such as the front bulkhead, suspension mount, shock tower, and big bore shock, making it a high-quality machine configuration.
Some parts that are newly designed for YD-2ZX:
Aluminum upper deck adapter (front side)
Aluminum upper deck adapter (rear side)
Graphite upper deck
Aluminum servo stay
Aluminum servo horn
This Drift channel is to share my ultimate drift experiences, tips, knowledge and competition mastery for RC, as well as sharing my drift experiences for real car. I hope my sharing can solve your problems faced with your RC car and also in competition.
QUESTIONS?
If you have any questions, please don't hesitate to comment my video below!