Building Cattle Panel Fence Trellises using Livestock Panel Connector // Bog Life

Рет қаралды 21,242

Жыл бұрын

Building and installing cattle panel fence trellises in our raised garden beds. Everything is being held together with Livestock panel fence connectors, from One Man Fencing!
One Man Fencing
onemanfencing.com/
One Man Fencing PM Livestock Panel T-Post Connector - 50 Pack
a.co/d/je4FKcK
Installation:
Position the posts into the ground until secure.
Once I have the fencing measured and cut to size, place edges on the inside of the posts, between the post and the edge of the bed.
Place your first Livestock Panel Connector on the T-Post, approximately ⅓ of way from the bottom the post and attach the connector to the post by tightening the 7/16 nut on the back.
Then once it is in place, slide the panel into the slot in the bolt and tighten the ¾ nut to secure it into place.
Place the bolt protector over the end of the bolt.
Repeat this with the other three posts
When moving to the top connector, the location will be based on the height of your arch and your posts. I’ll be placing them approximately 1 foot from the top. Then follow the same process for installation and tightening.
#BogLife #Howto #Building #VegetableGarden #GardenBed #Compost #Berrypatch #Raspberries #Blueberries #Blackberries #Corrugatedroofing #PurpleCowCompost #RaisedBeds #Growingfood #Tutorial #Nature #Gardening #Garden #Planting #food #SelfSufficient #youtube #KZfaqr #like #Subscribe #FYP #trending #DIY #Trending #Homestead #Home
Equipment used
Camera: I-Phone 12 Pro Max
www.apple.com/iphone-12-pro/k...
Microphone: www.amazon.com/gp/product/B08...
Gimbal: www.amazon.com/gp/product/B01...
www.amazon.com/gp/product/B07...
Tripod:
www.amazon.com/gp/product/B00...
Media Storage: www.amazon.com/gp/product/B07...
Music: www.epidemicsound.com/referra...
Follow Me
🌱 KZfaq: / @boglife
🌱 Facebook: / realboglife
🌱 Instagram: / realboglife
🌱 Twitter: / boglife1
🌱 Email: boglifemail@gmail.com

Пікірлер: 13

@speakrighttogod 3 ай бұрын

Your garden is to live for (not die)! Absolutely LOVE everything about it! Your wife and family are BLESSED to have you and your skills. Cattle panels are THE WAY to go for horizontal & vertical trellis support. Thanks for sharing, however, it would have been nice to see them after they were covered in greenery and all of your hanging harvest. Blessings to you and your family!

@butterflyinlove2 4 ай бұрын

What an amazing garden. You did such a great job. Wish I had a husband like this.

@suehonglee5107 Ай бұрын

Good job 👍 I want to make one too 😅

@RJvidmoto 3 ай бұрын

Really nice! Gives us some inspiration.

@jmwasp 16 күн бұрын

Are those wood chips on the ground in your garden? I tried to do the same thing with mulch but so far not so good lol

@BogLife 16 күн бұрын

@@jmwasp no it is pea gravel, with weed barrier underneath. I still have to weed and pull random tomato plant starting in the gravel, but it works great! If I were to do it again I would use a road gravel and compact it.

@eeassa 4 ай бұрын

Zip ties instead of those fancy panel connectors?

@BogLife 4 ай бұрын

The connectors will work for years and will stand the dramatic Wisconsin weather changes without breaking and needing replacement. That will ensure the cattle panels and beds will not be affected by the inevitable failure of the zip ties.

@vhutchins1759 Жыл бұрын

How did you bend it? The panel? Skipped right over that step. 🤨

@BogLife Жыл бұрын

Sorry yeah I did 😬. I did it the same way I loaded them in the trailer. The link for the short is below. I essentially used the corner of the bed as a brace and walked one end of the fence over until I could reach both. kzfaq.infoB3IoYZ_0NQo?feature=share

@vhutchins1759 Жыл бұрын

Thank you!

@leodorenguyen 4 ай бұрын

Hi, could you let me know the hole size and please? Thanks