Building Eduard's 1/72 'Hurristory' Kit!

Building Eduard's 1/72 'Hurristory' Kit! | Full Build Video in 4K

Рет қаралды 11,745

Күн бұрын

Hey guys, Modelling Weekly here! Well, it's once again been a while, though as explained in the start of the video, uploads will be more regular from now on (I hope!). Today I'll be taking a look at the hurristory kit from Eduard! Enjoy!
Thanks for watching the video! If there is anything you want to know, or anything you want me to know feel free to ask!
--------------------------------------------------------------------------------------------------------------------------------------
Check out my merch store here:
www.modellingweekly.co.uk
Music written and produced by PSBMusicStudio. Check out his KZfaq page here:
/ @pablosharples
Check out my Instagram for updates on builds:
modellingwe...
Discord server:
/ discord
Scalemates profile and stash list:
www.scalemates.com/profiles/m...
--------------------------------------------------------------------------------------------------------------------------------------
To contact me, you can use the comment section or use my email (contact@modellingweekly.co.uk). You may also contact me through social media, although I may not respond quickly.
Be respectful in the comment section. I do not wish foul language to be used as it makes it a bad place to be. Aggressive language towards my video in a comment will result in the comment being removed! Constructive criticism, however, is greatly welcomed!!
Again, thanks for watching and see you next time!

Пікірлер: 68

@ModellingWeekly 2 жыл бұрын

I really hope you enjoy this one guys! Stay tuned for next week's upload!

@vincenzomor1964 Жыл бұрын

Great work! Thanks for sharing!..

@stand-redoxszone6362 Жыл бұрын

I love desert hurricanes, amazing job

@ModellingWeekly Жыл бұрын

Absolutely love the scheme colours too. Thanks mate!

@petermerz2704 Жыл бұрын

Very detailed paint scheme. Looks great! Thanks for sharing. Happy days and model on! 😎🇨🇦

@ModellingWeekly Жыл бұрын

Many thanks my man! And to you too 😄

@johnmassey7463 Жыл бұрын

Great looking building mate, excellent detail and informative commentary. Pleasure to watch 👍🏻

@ModellingWeekly Жыл бұрын

Very pleased you enjoyed. Many thanks!

@vpugliese33 Жыл бұрын

Outstanding. Congratulations.

@robbo1068 Жыл бұрын

Great to have you back and sharing again, MW. An enjoyable build most definitely and a terrific final reveal.....you might see the bits that didn't quite work but it looks mighty grand this side of the screen. Enjoy your break and see you when that notification appears in due course.

@ModellingWeekly Жыл бұрын

Hiya mate! Glad to be back, and glad you enjoyed :) many thanks indeed!!

@jantimmer5558 Жыл бұрын

Really nice work, always love the shading you do

@ModellingWeekly Жыл бұрын

Thanks mate glad you liked it

@SullysScaleModels Жыл бұрын

Finally got round to this video! Sorry dude ! Awesome result dude!! But im going to have to do the rivet nerdy thing!!! Around the gun ports isnt a warning marker, what it is is that the gun ports were covered over using dope patches, wich when applied it was red. It was to stop any crud that could block the tinny gun barrels we used. But the colour was bang on it was quote a dark red

@ModellingWeekly Жыл бұрын

Ah, thanks for the clarification haha :D glad you enjoyed mate

@hamishsheinkels1478 Жыл бұрын

This is a cracking build, and reminds me I have this kit too! And I gdagaree on the quality, it looks amazing

@ModellingWeekly Жыл бұрын

Thanks Hamish! Definitely worth building up since you have it, great little kit!

@ModeliteDiorama Жыл бұрын

Great result! Nice work again from you :)

@ModellingWeekly Жыл бұрын

Many thanks mate :)

@williamkoppos7039 Жыл бұрын

Yeah looks good to me. Nice paint. The "Marbling" works very well on beat up desert dogs.

@ModellingWeekly Жыл бұрын

Thanks very much! Glad you like it 👍🏻

@Jake-jw3sk Жыл бұрын

Awesome video MW, this really inspires me to get back into modelling. That model is beautiful, very well built and the paint job striking (pun definitely intended) 😂

@ModellingWeekly Жыл бұрын

Thanks so much Jake! Definitely get back into the hobby, well worth it

@Jake-jw3sk Жыл бұрын

@@ModellingWeekly Yeah, I just need to figure out a way to start spraying again, since I just moved into my new house 😂

@JedenSiedemDwa Жыл бұрын

So great result! All the best for You! ;)

@ModellingWeekly Жыл бұрын

Thank you very much! And you too!

@MOS6510Models Жыл бұрын

Love this mate.. fab effort

@ModellingWeekly Жыл бұрын

Many thanks mos ;)

@cushionbelly2519 Жыл бұрын

Great idea to have the white stripes to indicate the ribs. looks great.

@ModellingWeekly Жыл бұрын

Thanks very much! Glad you like it :D

@riccardorostagno2728 Жыл бұрын

Bellissimo lavoro …….un vero artista

@ModellingWeekly Жыл бұрын

Thank you so much 😄

@SprueFascinationChannel Жыл бұрын

Nice job 👍

@ModellingWeekly Жыл бұрын

Thanks mate :)

@plasticalchemist Жыл бұрын

Amazing build, I have finished that version but from Airfix

@ModellingWeekly Жыл бұрын

Thanks mate. Yeah I think I saw yours, brilliant result :D

@user-wj4lr4wh8w 10 ай бұрын

I know that I’m late to the “party” but I have to say that I’m really liking this video and the great result you produce on such a small model. We seem to be using some of the same items such as the H&S Infinity and AK Real Colors. However I’m not getting the same airbrushing results as you. Would you mind sharing what kind of thinner you normally use with the AK-RC and at what pressure you airbrush?

@ModellingWeekly 10 ай бұрын

Hey, I thin all my lacquers with Mr. Color levelling thinner, and have my airbrush set to about 15 or 20 psi :)

@HaroldClements Жыл бұрын

Hi, grate video and some new ideas on how to get a good breakup of the main colours using mottling. However, I have one question. You said you use Mr Mahogany Surface 1000 as the primer. How do you thin this? I am guessing Mr Color (Levelling) Thinner. I have tried this with the Mr Surface 1000 (Grey), but I found that the topcoat pulled off (along with the Mr Surface) when removing making tape (Tamiya). Have you experienced any similar or do anything else “special”? Note: I washed and dried overnight the model before working on it…

@ModellingWeekly Жыл бұрын

That's a very odd situation...you do indeed thin Mr surfacer with Mr color levelling thinner, and I've never had this issue so slightly confusing. My tip would be to slightly roughen up the surface of the model with 3000 grit sandpaper/sanding sponge, just to give it a tiny bit of extra adhesion that won't be noticeable once painted over 👍 good luck :)

@christiansexton7927 Жыл бұрын

Fantastic job. How is your ratio thinner/paint on your colours?

@ModellingWeekly Жыл бұрын

Thanks! It varies a lot from colour to colour and brand to brand, and most of the time it's just done by eye - though I like to thin the paint down to a point that it has the consistency of milk, which generally seems to work

@christopherbench6936 Жыл бұрын

I had a real problem getting the front landing lights to fit - did you have to trim anything? Lovely build.

@ModellingWeekly Жыл бұрын

Thanks! Yeah, had to trim them down a bit with sanding sticks. Tight fit!

@StevenSeabass Жыл бұрын

Great video and great build. Can I ask what size needle you use in your airbrush please?

@ModellingWeekly Жыл бұрын

Many thanks! I use a 0.15mm needle set :)

@StevenSeabass Жыл бұрын

@@ModellingWeekly Thank you for getting back to me. Did you use that needle for the primer too? Thank you

@ModellingWeekly Жыл бұрын

@@StevenSeabass ah, forgot to add that! For the primer and varnishes, I used a 0.4mm needle :)

@jackpenny1910 Жыл бұрын

I have a question: how do you keep the glue control so precise when applying the photo etch parts?

@ModellingWeekly Жыл бұрын

I generally apply small dots of superglue with a toothpick, after squeezing a bit out onto some foil or similar surface! Hope this helps :)

@PeteCourtier Жыл бұрын

Lovely build👍 Any chance of showing how to remove the Eduard decal carrier film on a vid soon? Cheers.

@ModellingWeekly Жыл бұрын

Yeah, I'll be working on it! First need to get to that stage on another Eduard kit in order to demonstrate haha. Currently in Turkey so this vid might not be for a couple weeks :) hope this helps mate

@PeteCourtier Жыл бұрын

@@ModellingWeekly thanks👍 Enjoy your holiday 🍺🍺🍺🍺

@jackpenny1910 Жыл бұрын

What material do you use for the rigging on 1/72 planes like this?

@ModellingWeekly Жыл бұрын

Some thin nylon fishing line

@jackpenny1910 Жыл бұрын

@@ModellingWeekly thanks!

@chuckhardin1936 Жыл бұрын

Looking good there. I've always loved the Hurri, much more so than the Spit as it really carried much of the weight in the BoB with so little recognition. Not to mention in Greece and Africa, where it was usually just the Hurricane with obsolete fighters until it was joined by the P-40 Tomahawk in Africa. Such a sturdy lady who carried on.

@ModellingWeekly Жыл бұрын

Thanks very much! You're right, the Hurricane is criminally underrated and often overlooked, so it was fun to make a model of one :)

@johnkelly2098 Жыл бұрын

Nice build. It's a great shame you didn't show us how you dealt with the decals given the mixed reports on them.

@ModellingWeekly Жыл бұрын

Planning on doing a dedicated video on them at some point :) glad you like it!

@johnkelly2098 Жыл бұрын

@@ModellingWeekly Ah great. I have that kit in my stash so the guidance would be excellent.

@ericrichardson6593 Жыл бұрын

Enjoyed the video, but you seemed to spray straight over the canopy without masking it, but was no mention of cleaning it up. Can you elaborate please?

@ModellingWeekly Жыл бұрын

Glad you liked it! Kit came with two canopy options, open and closed - each using a different part. I wanted it open so I used the unmasked closed part to mask the cockpit whilst I painted the model :)

@ericrichardson6593 Жыл бұрын

@@ModellingWeekly Ahhh, that was subtle, didn't spot that, or rather assumed would be same canopy for both positions.

@ModellingWeekly Жыл бұрын

@@ericrichardson6593 yep, probably should have mentioned it lol

@modelmagic9930 Жыл бұрын

So are we back to "weekly uploads"? If thats the case you’ve done a cracking job with this hurricane. Also your audio is a bit wired to me.

@ModellingWeekly Жыл бұрын

Thanks! Should be back, yeah. The Friday after next will be an exception as I'm in Turkey, though I have unedited videos ready to be prepared for after that. Maybe trying listening on headphones for the audio thing? The mix sounds good for me

@modelmagic9930 Жыл бұрын

@@ModellingWeekly I’ve got that noted would you be anywhere close to Gallipoli when you go to Turkey? Just asking.