Link to website and plans: 57design.ca/

Viny, your channel is criminally under rated. Keep up with the cool projects and humor. You’re easy to root for and fun to watch using your skills in action.

I appreciate the humor spread throughout your episodes, keep up the hard work.

Using your MIG torch as a hammer had me rolling Viny! Another great project and video👍

Looks like a great bender Doc Viny. As long as it doesn't need 1.21 gigawatts to run we should be good!

I can't believe you haven't reached a 100k subscribers yet. Your content is informative, diverse, and best of all witty. Plus you are one of the very few creators that actually isn't ashamed to show their fails and share your lessons learned. Your channel came up in the KZfaq algorithm while I was watching James Clough from Clough42. I've since subscribed and watched all your videos. I think the both of you are highly underrated, especially considering the level of quality and detail you accomplish in your garage workshops. My only complaint is that I wish you dropped videos more often. Keep up the great work!

You produce very nice videos, fun and informative to watch. Don't try and break with the thick pipe, you did great making it.

This will forever be my go to video for modifying a bottle jack, to run it inverted. Why do I need to run a jack inverted? I don't know yet, but when I have a reason, I'll be back here

Great workmanship and humorous commentary, Viny. I'm looking forward to that link for plans for this project.

What a great outcome. Nice work. The bender is a good looking design.

Common term for your "bullet" would be a "mandrel". You independently reinvented a mandrel tubing bender. This is an amazing feat, and now I know how such a thing works. Bravo! Plus excellent and entertaining video all the way around.

The word Mill comes from Mule, in the historical times they used a Mule to turn a milling stone to crush the grains.

excellent.....comme toujours d'ailleurs....merci cousin 🤣🤣

How could we not like your content? Informative, entertaining and just good content. Awesome job once again!

Amazing video. Your content and editing skills just keeps getting better. I was watching this with my wife and explaining what you were doing with the jack modifications and saying how impressive it was that you were showing how to do all this work just to avoid paying for a pneumatic one, and now i'm excited for episode 2. I have used a 3rd gen speedway bender for years that is very similar to the eastwood one and I love it, but it is certainly not everyones favorite style, and it takes some getting used to.

I just found this guy . Good work and sub'd . Thanks Viny . :)

Couldn't agree more with the comments: why aren't you at 100K subs?! I simply LOVE your videos. Informative. Funny. Outright entertaining. Keep it up!

I'm also considering to build a bottle jack powered tube bender, I've been designing it for the past week with CREO Parametric to build a project I have in mind. Yours ended up being a heavy masterpiece!

great job for taking the time to educate us super job!!!!!

Viny....you are like me, i think, if you are going to do it do it propoly at once! I were thinking, if you do the die- big 3-3½ inch and you do like schims with like you fit in the die to make smaller size tubing......?! You are realy one of the best on KZfaq, im also proud to have been following you for a long time... im following some canals in Sweden wich has about the same energy like you and they been a smaller canal and grown and still has the energy 🎶 thats the way I like it, aaahhhaaa, aaahhhaaa, 🎶 thats the way I like it, aaahhhaaa, aaahhhaaa! YOU ARE THE BEST!

WOW!! Absolutely over built my friend. Really great video.Going to be several months before I have to make a tube chassis though. Still recovering from a motorcycle accident where I was run over by a huge truck and nearly had my leeg crushed in twain...Doing much better but still in incredible pain...

I'm so glad this channel showed up when I was looking for a diy car jack.

Super cool! Looking forward to more.

again., …. underrated so massively

Haha. I know that feeling with these suckers

I built a modified version of the “Got Trikes Bender”. I may need to add a mandrel for mine like yours. I think I have that same boring head. You did a great job

Well done and laugh out loud funny.

Excellent work, fantastic video,...and you're hilarious!

Another great video. Talented Madman👍👍👍👍

dude your a fuc... genius thanks for share!!

Well done.

Great work and very entertaining , Thank you

One hell of a great job well done! Awesome

Awesome tube bender. We shared this video on our homemade tools forum this week 😎

Nice job, part two will be easier to use 🙂

Plans? I think I'd rather just build my own and yours looks awesome ! Id I can send out the drawing to have the steel cut and shipped to me this could work!

I wrote a CNC product for The Trane Company (in Clarksville TN) so they could convert their 3D CAD tubes to CNC instructions for their NC Tube benders. Lol it was a lot of fun (once I got my mind wrapped around it 😶). Anyway, I learned about tube benders, tubes, and bending tubes! Like that "bullet" thing is what they call a "mandrel".

Super boulot ! Il me manque juste une découpeuse plasma numérique et un tour et le besoin de fabriquer un arceau.

I want to build me one like this. Good job

Your a mad man but I love it lol

Why you don't have the jack at the bottom pushing up. You can put bolts on the dial so you can adjust the gap to put different size tubes.

While you're in that bottle jack you should have also threaded on a Quick Connect fitting so you could use it with a air over hydraulic foot pedal and convert it to a ram cylinder. I did that with mine and It's awesome and I'll never go back

Wow! Great video. Great design. And lastly great cost savings. I believe I will be subscribing from here on out. I think I can learn a bit from you.

Nice tool and free...... haha....

I just found your channel and absolutely love it, being a fabricator myself. I would love it if you still had these plans for sale, though. I've been wanting a tubing bender for a long time but they're so expensive

Wow, très impressionnant! Félicitations de la part d'un autre canadien-français!

LOL - Love the OF paywall! Hahahaha

That looks really nice, great job. There is no link in the description for your Only Fans page, lol. Can't wait to see the next video when you break out the 2 incher.

Impressive!

Great video man 💯👍

Great Video, the bullet is called a mandrel or was on the addison benders i used to use

I want to see you do Exhaust Tubing 2.5" diameter 0.065" wall.

Wow that is the best bender yet that is super super awesome thank you You get a 👍🏻 up and I subscribed awesome help full 👍🏻👍🏻🤟🏻

AVE must be the most influential channel on KZfaq. Pretty much every channel makes references to him.

Amazing work as always, and the AVE reference and other comedy is always entertaining

Excelente propuesta

@15:10 I was almost as pleased as you

j'aime ca quand ça coute heur-ji-ain!!...j'écoute

Bonjour, j'ai une ford taunus dans laquelle j'ai mis une rampe de carburateurs dcoe45. Je dois deplacer le mastervac, j'aimerais le mettre côté passager. Comment ferais-tu ? Une idée ? Suggestion ? Un grand merci.

Viny please please please clean the chips from your lathe

You are talented and hilarious! Subbed.

Belle job. Bonne idee

I would put an hydraulic log splitter on there instead of the bottle jack . I use them to power all sorts of machines up . They are Quite easy to chop down smaller if needed . and you can pick them up quite cheep

Subbed 👍

So to build a free tube bender all I need is a machine shop? Ok.... sounds like a money saving idea to me,,,,LOK

Hello, your tube bender is exactly what I need! The only one I have seen until now that works perfectly!!! Do you have plans for sale or can you built me one? I am desperately waiting for your response!!!

Instead of air over hydraulic maybe try electric over hydraulic. I added one off eBay for 129.00 USD to my bender and it works perfectly. Can bend 90 deg in about 12 seconds

havent seen a bullet used in other videos ?? they using thinner tube ?

LOL I was going to say Why didn’t you use an air over hydraulic jack. I the bullet idea appears to be the same as mandrel bending. I’m not sure where the bullet ended up after you put it in the end of the tube. What am I missing

The "Bullet" as you can it is called a Mandrel

would ya sell your plans so i could build one

Plans will be available?

yay, everyone's favorite ingénieur Quebecois!

Rather than use the slow hydraulic you can simply drive a worm gear into a large diameter tooth gear that is adjuacent to our die and drive it with an electric 9 amp drill.

Have you tested your pipe bender yet? Where can we get the plans?

Muy bueno contenido cual es la dimensión del dado

bonjour cousin Québéquois je suis tes avancées mécaniques avec une grande attention et je suis très admiratif par ton travail toujours très professionnel : DAO , table découpe plasma , à quand le TIG ?. Bravo pour le plastique tu as eu bien de la patience , moi je suis plus polyester mais avec une moyenne de température de - 50° C chez toi ça doit poser plus de problèmes je monte une Midas ( évolution des Marcos ) avec un R1 en central arrière alors je te pique des idées ça et là pour ce qui est de la cintreuse , je n'ai pas compris où tu fixais la " bullet " ( je sais ce que tu vas me répondre mais non , ça peut pas être là ! ) amicalement signé : un maudit Français

Sick. You got a new sub🤙

Yo mec je te suis depuis un moment et je me dit qu’il faut que tu faut que tu crée une chaîne francophone car t’es fabrication nous intéresse fortement en France !!!!!!

You might want to keep the old pump style. Especially if you continue to make them heavy parts, hehe

The best tube bender is rouge fab. Period.

Youre next build should be an overhead gantry, my boss told me skyhooks are no longer available.

Viny, please post another video….I’m going crazy!!!! SVP m’sieur!

Awesome video my dude l 👍 When do you expect to publish the plans? Want to purchase and build this project to use in other projects 😄🥰

“Onlyfans subscription needed” had me rolling! Started bingeing your vids and I’m very impressed!

Thanks for the video. Will you be putting the plans for this in the design store?

Wow ! Chacun de tes projets son ca coche

How do you keep the bullet from getting stuck inside while bending the pipe??

👍

What software do you use to create your designs?

A mega pint !?

do you plan on ever uploading the plans for this

THe most important part of this whole build was the bullet .. The bullet separates this from every other tube/ pipe bender on you tube .. essentially making it a DOM mandrel bend .. Please elaborate ?

awesome bender and awesome video. not sure what i want more.. the tools in your shop or your ability to edit videos. i actually just purchased a rogue fab that i haven't even tested yet. wish i could afford their mandrel setup, but at roughly $1k for the add-on, it'll have to wait till i get more serious.

Very nice as always. What would that cost if u had to make and sell one as opposed to buying the usual ones out there?

Do you have plans for the bender now?

Isn’t the bullet known as a mandrel?? As in a mandrel bender

more info on that "bullet" please, i didn't get how it works. You said you call it bullet, what's it's real definition?

Dime daddy

How did you afford all the tooling in your shop. I’m trying to build one like yours