No video
Building in the SilverStone SG13!
Рет қаралды 211,171
Күн бұрынSPONSOR: Snag an OEM Windows 10 Pro key and use code 'SKGS' for a 25% discount: bit.ly/3nfdVmg
Let's build in this SFF ITX PC case from SilverStone!
⭐ Consider supporting us on Patreon! / gregsalazar
🛠️ PC parts list:
AMD Ryzen 5 5600X: geni.us/jgogAp
ASRock B550 Phantom Gaming ITX: geni.us/kdTnq
AMD Radeon RX 6800: ebay.us/SfxtjU
32GB Corsair Vengeance LPX DDR4: geni.us/0XQMH3
SilverStone SG13B-C: geni.us/X3n3kY
Noctua NH-L9a Low-Profile Cooler: geni.us/cwhAq1f
Corsair MP600 1TB: geni.us/bEZk
🎬 My studio gear on Amazon:
Sony a6600 (Primary): geni.us/k8VBToq
Sony a6400 (Secondary): geni.us/24nqw
2x Pixio PX277 Prime 165Hz IPS Monitors: geni.us/bCg4nD
Neewer LED Lighting Kit: geni.us/9VTXr0
Audio-Technica AT2035: geni.us/xvQc
Yamaha MG10XU Mixer: geni.us/d4VvGM
Neewer Microphone Arms: geni.us/1w5Sx2Y
Arrowzoom Sound-Damping Foam Panels: geni.us/EKFxZc
📱 Follow me on social media:
TWITCH: / gregsalazar
FACEBOOK: / gregsalazaryt
TWITTER: / gregsalazaryt
INSTAGRAM: / gregsalazaryt
💻 Join our public Discord server: / discord
DISCLOSURES: All Genius links are tied to our Amazon Associate account, from which we earn a small sales commission. Links containing a 'bit.ly' reference forwarding to Newegg are tied to our Rakuten account, from which we earn a small sales commission. All sponsored links and comments will contain the word "SPONSOR" or "AD." Any additional revenue stream will be disclosed with similar verbiage.
#ITX #GamingPC
@XxPuffyWolfxX 3 жыл бұрын
I love how to this day, the Microwave stays relevant 🙏🙏🙏🙏 SMOL & STWONG
@GSXone 2 жыл бұрын
I love my microwave.
@maaingan 2 жыл бұрын
it does look exactly like a microwave
@imnotallergic 9 ай бұрын
@@maaingan it is actually smaller than a microwave
@NismoPWNS 3 жыл бұрын
"I am stupid" inserts Leclerc fail lol I appreciated seeing that from another F1 enthusiast. Redbull 2021!!!!
@shaunakvaidya7556 3 жыл бұрын
Leclerc is ❤
@BSG99 3 жыл бұрын
Fully rooting for Max to break the Lulu streak
@rakvian 3 жыл бұрын
i thought thaat it was a clip from a gameplay lmao
@reikisano4542 3 жыл бұрын
Pronto, Leglerg?
@braunhermann1910 3 жыл бұрын
@@reikisano4542 Sbinnala
@sleepingsnake2097 3 жыл бұрын
I always feel uneasy when you have to fiddle with a small case to get all the cables and components in, but it's so satisfying when the build is complete.
@Jsteeeez 3 жыл бұрын
The 5600x is a game changer for sff. 65 watt part and doesnt draw more than like 77 watts if u stress every thread in cinebench. Being able to run a chip that will draw 40-60 watts while gaming that delivers comparable frames to a 10900k is really revolutionary
@Cloudrak 3 жыл бұрын
@@EvilTurkeySlices me with a 1650 super...
@jamegumb7298 3 жыл бұрын
@@EvilTurkeySlices Vega does really well at cracking.
@fynnstechkanal 3 жыл бұрын
I just build a PC with it and I am super happy with it as upgrade from i7 6700K. I still don't get why Intel needs so much more power for the same performance...shitty 14nm+++++
@Jsteeeez 3 жыл бұрын
@@fynnstechkanal because its 14nm the transistors are further apart. Its less efficient because electrons have to travel a further distance. There are other optimizations too, but thats a huge reason why node shrinks increase perf per watt
@killakanzgaming 3 жыл бұрын
I managed to snag one during the supply shortages toward the end of last year. I had to pretty much check the stock from my retailer on a daily basis for a couple of months, when they got some in they'd sell out very fast! But I managed to get one at RRP! Yep, the 5600x is a fantastic CPU for gaming. A processor in AMD's *budget* range competing (at the time I got it) among Intel's high-mid to top range... It's amazing.
@turbo5546 3 жыл бұрын
Hint: Put a small thin fan blowing out on the top of the case over the gpu, it makes a huge difference on case temps when the GPU is active.
@ayuchanayuko 3 жыл бұрын
Can attest to this with my SG05. The 70mm fan holes even match with the case rail holes for mounting. I also put a switch on mine so I can turn it off when I want silence.
@j00ktau 2 жыл бұрын
Are there fan mounts on the top of SG13 to install a fan?
@turbo5546 2 жыл бұрын
@@j00ktau No, you have to use the vent holes as a way to mount the fan.
@ezzex9800 Жыл бұрын
Used two noctua 40mm 5000rmp fans above the gpu,used the included rubber tie downs to secure. Also mounted a 140mm noctua 3000rpm fan to the front. Keeps a ryzen 5 2600 + rtx 2060 at 30c+ at idle and 60c+ at load. Have smart rgb on it and it's supposed to go red when it goes over 70c ,and havent seen it yet.
@yeller4640 3 жыл бұрын
The Best Microwave on the market
@David_Vadnaf 3 жыл бұрын
I used to subscribe way back in the day... But then my life falls apart and lose all my interest in pc and tech... So then...Now i am back alive again mate. Nice to see you again. You are still alive and well.
@birbv 3 жыл бұрын
14:56 silverstone knows their components *sends a psu that dosen't fit in their own case*
@GregSalazar 3 жыл бұрын
Hahah it was a goof. The rep was cool and overnighted the adapter he forgot - but I ended up just using the Corsair one so that I didn't need to wait.
@kristianschlosser7108 3 жыл бұрын
@@GregSalazar so instead of the PSU it is the case that comes with an adapter? So weird 😅
@tcntad87 3 жыл бұрын
It did fit tho?
@dialgarocksful 3 жыл бұрын
it can fit tho only u use 2 screws. have a sf450 on my microwave and is mounted on its top 2 screws (i use the tall noctua "low profile" cooler, not l9a so it supports the bend of the psu)
@hunner4265 2 жыл бұрын
@@kristianschlosser7108 9 months late, but a correction: There's actually a plate that you screw the power supply into that makes it fit into an ATX power supply's mounting holes. So the PSU was correct, but it didn't come with the plate that made it fit the hole in the case
@QuiteLunacy 3 жыл бұрын
I love cases that don't look like a PC. This would look amazing sitting on the TV stand in a living room.
@nightcorefusion3884 3 жыл бұрын
Okay. For those needing them. Tips for building in the SG13 from someone who's done it about 8 times. 1. Use an SFX PSU. Silverstone sells an adaptor bracket. 2. That's it. The additional cooler height clearance and front fan spacing makes it easy to use any cooler you'd wish. (Within reason.) And this is also the primary method of fitting an AIO in the system. Edit. Tip 2. Thicker cards and graphics cards in general, are intended to be slid in from the front. Not placed in the case at an angle. You can fit larger cards than the ones used in this video in this case. You just have to know how.
@nightcorefusion3884 Жыл бұрын
@J-Cire Yeah, I've looked at that case before. Not too much larger than the 13 but it has a lot more room to build. Probably the best option for modern parts. GPUs are becoming quite large.
@masterbeat04 3 жыл бұрын
That Charles Leclerc clip never gets old
@therealsilens 3 жыл бұрын
SG13 is a great case. Building in it can be a challenge but with proper parts selection it can turn out to be a masterpiece.
@tr4nnel752 Жыл бұрын
I went from a SG13 to a A4-H2O. I have to say it is a big upgrade, but the SG13 is still a fun case.
@LazyPCRehab 3 жыл бұрын
The SG13 was my first PLEX NAS build, love that thing. I switched to the Node 304 for the extra storage capacity.
@SpencerSlaughter426 3 жыл бұрын
I actually enjoyed watching you building this PC, running into the problems with the card and the power supply and figuring those problems out more than I enjoy watching someone build a PC without having any issues.
@leadergames0661 3 жыл бұрын
Gotta love those small cases 😍 I have a huge tower and I wish I had built a small form factor build from the beginning.
@GregSalazar 3 жыл бұрын
This one was - honestly - super fun to build in.
@MrPruske 3 жыл бұрын
the tu-100 is cool too imo
@catch22frubert 3 жыл бұрын
I did my first build in a Lian Li PC-O11D because I fell in love with the design when it first came out, and really wish I had done the mini version instead. Don't get me wrong, the O-11 is a beautiful case, but its huge and heavy, and 9 fans is a shitload. You know how much 9 Corsair LL or QL fans cost? Like $300+!Really wish I had done the mini version for multiple reasons now, but there's always next time. I guarantee the 2nd build i do will be much smaller and lighter.
@sterlin_merlin1632 3 жыл бұрын
The SG13 is what I have my current build in, AND it was my very first build! What I really love about it is the fact you can put in a full length GPU!
@MurpheeLaw 3 жыл бұрын
I love this. I have local content in my own back yard (Orlando) with you. I love building PCs, and these videos are great! All we need now is a Microcenter and we're set!
@ayuchanayuko 3 жыл бұрын
I have the smaller older version of it called the SG05. - It has a 120mm AIO in Push-Pull with Arctic P12 fans. -The SFX PSU is mounted where the fans is pointing up. - It has two 3.5" HDDs. One is mounted on the radiator and one between the PSU and GPU. I'm planning to modify the top rails so they are both on top side-by-side. - It has two SATA SSDs. Both are mounted beside the radiator on the right, away from the GPU exhaust. - It has a 70mm (or 60?) fan on the GPU extracting air out of the GPU and away from the HDD beside it. It has a switch in front so I put it on off during light load for ultimate silence. - I used to have a fan on the side by the PSU/CPU extracting air. But I realized that the mosfets kept overheating so I mounted an old Stock LGA775 fan only on my waterblock to push air thru the VRMs. Just like the GPU fan, it has a switch in front so I can keep it off for ultimate silence when watching movies or doing light tasks. Future plans: Modify the top rail to accept two 3.5in HDDs. I might be able to modify the back case just below the PSU to mount some 40mm fans or laptop slim fans to help extract air from the board. I dont think its needed though. Once I get both HDDs on top I can just use the vacated space behind the GPU to create a vent for an exhaust fan.
@dierkrieger 3 жыл бұрын
Great build. Love to see a powerful computer in a small form factor.
@czbrat 3 жыл бұрын
I'm glad you kept the mistakes in the video. Got to learn a lot about building in this case.
@Leobaku77 3 жыл бұрын
I used to have my system on a SG13. I had to cut up the upper lip on the inside of the case on the side of the GPU so that I could install a Sapphire Pulse 5700xt as it was too wide and tall to fit in there. I also had a SFX-L PSU and a Corsair H60 as well. As for airflow I also added a 92mm fan on the other side of the case using zip ties so my components received fresh air from the side. It was a tight fit but my Ryzen 2700x idled at 60C and topped at 80C when gaming. Being my first build I struggled for a bit while assembling it, but it was a lot of fun!
@Leobaku77 3 жыл бұрын
Oh! and forgot to mention I also had a HDD on the bracket that comes with the case inside as well so there's that.
@magicman12b 3 жыл бұрын
Built a system for a coworker last year using this case and it was one of the best builds I ever did. I was able to use all BeQuiet and AMD components with a 140mm fan in the front. Use the top rails for cable management and there is enough space in the front grill to sneak in a 200mm RGB strip.
@joshsummers9607 3 жыл бұрын
I've built in this case. Was very difficult with my big hands but do able.
@GregSalazar 3 жыл бұрын
Yeah, depending on the hardware and order of operations, some things can be a bit difficult to reach. But very satisfying once completed!
@joshsummers9607 3 жыл бұрын
@@GregSalazar most definitely once completed was satisfying. I went with the aio versus air cooler but I didn't use some beefy hardware either.
@sogood4u489 3 жыл бұрын
Try doing a cooler master rc-130 with a non modular power supply, ssd and a hdd.
@DarkMikaruX 3 жыл бұрын
Don't get me wrong. I still love my SG13 but I had to go through a few iterations before I could get the temps under control. Had to remove the low profile Scythe cooler in favor of a 120mm AIO from Coolermaster and def swapped out my PSU for a SFX PSU. Just no room for anything once you start filling it with SATA drives. Still runs today with a 2400G, RX570, 16GB of DDR4 ram on an Asus B450 mini itx board. Glad to see others still using this oldie but goodie case!
@imaginewagons3777 2 жыл бұрын
Man, now I want to put my stuff on an ITX case, but living in a tropical country with no airconditioned room would be a hell for it.
@tomgray7049 3 жыл бұрын
I used a 140mm fan in front and the noctura low profile cpu cooler. I also used a sff650 from corsair
@ReactExo 3 жыл бұрын
I love how he’s like, “I’m in the same boat as you guys, I haven’t been getting free cards recently”😂 Man is down bad
@ReactExo 3 жыл бұрын
And Silverstone are low key cheap for not adding the adapters, but Corsair is more reputable anyway
@Seki.packed.u 3 жыл бұрын
Love your videos i watched them for hours while I waited for my pc parts to ship
@GregSalazar 3 жыл бұрын
Wow! I really appreciate it! Hope to keep you entertained in the future :-D
@kell7689 3 жыл бұрын
I'm a simple man. I see ITX build video, I hit like.
@paladingeorge6098 3 жыл бұрын
I built a compact computer for my sister last year using some spare parts, had to remove the plastic shroud off my MSI GTX 1060 Gaming X I was putting in the build XD. That was quite a surprise for me, but at least I was able to make it work.
@hoodie_mane 3 жыл бұрын
Never noticed the signed Breaking Benjamin record on the wall. One of my favorite bands!
@jeremybadlon 3 жыл бұрын
Nice build on that greg and lucky bro you have, upgrading his build without requesting it.
@thischannelisnotmine 3 жыл бұрын
Man that thing looks slick, makes me super jealous looking over at my nearly 8 year old system lmao
@ivailok3376 3 жыл бұрын
Didn't expect to see an F1 reference here, but I'm happy to!
@farqman 3 жыл бұрын
You can get an sfx pay in there without the adapter. At the top left of the PSU hole there is a little tab like an inch in from the corner, the top left screw hole on the sfx PSU will line up with that whilst the top right screw hole will line up with the cases regular top right screw hole. Won't be pretty, but it'll hold.
@GregSalazar 3 жыл бұрын
I'd rather just use an adapter LOL. Something that sketchy shouldn't be acceptable.
@apocalypse3039 3 жыл бұрын
That Charles Leclerc reference was spot on
@marley6584 3 жыл бұрын
Used this case to build my dad's office PC! He loves it to death :)
@PeterLiuIsBeast 2 жыл бұрын
I just did a build with this case the other day. I used a full atx psu, RX 6600 and the same Noctua Cooler. The stock AMD stealth would fit but it was just only 2 cm from the psu so I swapped it out. I was also able to fit my old-ish HGST 3gb 3.5 hard drive beneath that bracket that hangs across the top front of the case.
@Andrepie123 3 жыл бұрын
There was definitely room for the aio
@dashkataey1740 3 жыл бұрын
You should have interlaced the "Damn he thicc!" meme when you realized why the 6900xt wasn't fitting into the case.
@glenakatsr 3 жыл бұрын
Can you do more SFF builds in the future please? They are really overlooked, smole and powerful!
@squalodombor99 3 жыл бұрын
Fantastic, i was seeing this case from so much time, finally someone good as you have reviewed it :D
@jtchoi2003 3 жыл бұрын
The SG13 series actually has mounting holes for SFX power supplies, but they only allow you to use two screws on the top or bottom of the power supply. It also leaves a big hole in the back which isn't very aesthetically pleasing.
@MothsTreeLeaf 3 жыл бұрын
Silverstone: This PSU and Case will work just fine. Also Silverstone: We don't plan on including a bracket, why would we??
@steviecreasy2837 3 жыл бұрын
Loved this build, particularly enjoyed the Charles Leclerc I am stupid reference
@NotMuchHere 3 жыл бұрын
i am glad to see i am not the only one who say ooops and has to wait and try again
@TheAngry1 3 жыл бұрын
What a twist! Very clean build for such a small case
@benmurdoch9962 2 жыл бұрын
I had been using this case with the full size 2060 and aio and everything, totally fits, but kind of a little tricky to place it all in the right order. Temps were about 60c max but I ended up finding a nice Dan A4 clone that is almost half the size, still using the full size 2060. These cases are by far the best for the money and still having aio support.
@TheNDex 2 жыл бұрын
I have this same case and have been using a low profile fan and have run into heating issues. What aio are you using?
@benmurdoch9962 2 жыл бұрын
@@TheNDex I was using a small 140mm Thermaltake aio from best buy I think it was pretty cheap and worked amazing
@Trekrid 3 жыл бұрын
The SG13 was the first case I ever built my first custom build pc in. I can say hand on heart that an aio will fit even with a full size PSU. That was with a full size GPU and using the hard drive plate. It was a tight squeeze but it is possible. You just need to believe. Still though it's a great little case and switching to an SFX PSU was the best decision I ever made with this case.
@UnfocusedRacing 3 жыл бұрын
I have a SG13B laying around. Use to have a 3600X and GTX 1070 FTW2 in it. Those now live in a Cooler Master NR200P. Better cooling in the new case and it looks fantastic.
@monetary687 3 жыл бұрын
"in hindsight we could have added the AIO, silverstone said it could be done they know their own components" clearly not they sent the wrong size power supply
@GregSalazar 3 жыл бұрын
😅
@matasa7463 3 жыл бұрын
@@GregSalazar You should put the AIO in Greg! Post the fixed build as a short or community post.
@christianericcalimlim5489 3 жыл бұрын
That charles leclerc reference tho 🤣 fellow PC and F1 enthusiasts laughed on that one!
@faiflowright01 3 жыл бұрын
Been looking to transplant from my Cougar QBX to something smaller and was eyeing the SG13. Glad you made the most recent build on it
@fredaobezerrabr Жыл бұрын
I love Silverstone. I have a PSU with more than 10 years of use of 750Watts still working in my son's PC. A pity that in Brazil its distribution is rare and expensive. Like Noctua, a cooler like this costs 1 month of basic salary here.
@mrNLRay 3 жыл бұрын
Haha nice Charles Leclerc baku i am stupid snipped. More F1 Greg. :)
@maswisnu7 3 жыл бұрын
My first itx case 🍻
@timberw1lly 3 жыл бұрын
Your Silverstone PSU issue is why I went Corsair SF750 - They include an ATX bracket in the box. This is a neat case though, and a great build. Nice job!
@llamapi3 3 жыл бұрын
I do appreciate how you keep honest even with a sponsor. Not impressed with Silverstone here. Props to you not covering for them.
@Chemy. 3 жыл бұрын
I like how you are doing the adjustment while you are building, great rig and video Greg
@EvernooBE 3 жыл бұрын
It's easy when you have a whole shelf of PC parts though. Not a luxury us mortals have. We have to plan, and think about everything in advance and can't just "wing it".
@gayprideows 3 жыл бұрын
I built a system with this motherboard. Other than the Bluetooth CONSTANTLY cutting in and out it's very nice!
@ensabrenoir5669 3 жыл бұрын
...I did a verry similar build several years back in a silverstone SG05 using an corsair H80i, Gtx 670 and an asrock z97 itx ....was my first itx build.
@castersgaming603 3 жыл бұрын
i think you just became my new favorite PC building KZfaq with that breaking Benjamin record that's signed behind you
@Nikeyyy 3 жыл бұрын
love the vids man, im new to pc builds and still learning but watching a lot of your pc builds most def helped a ton on understanding what you should be looking for in a gaming pc. prolly not gonna read this but just wanna send some love your way brother ✊🏿
@Metayoshi 3 жыл бұрын
After upgrading to my current PC last year, as kind of a fun project, I re-cased my old i7-4790k and GTX 1070 FE with this case, since it was originally on an ITX motherboard in a mATX case, and I used a full sized ATX PSU, and had a SATA SSD since NVME wasn't a thing yet on that old of a system. Definitely had to figure out the best way to put everything in since the ATX PSU takes up SO MUCH space, and cable management was a challenge. I threw on the stock Intel cooler to fit since I wasn't trying to spend any more money than I had to, but I also added a front intake fan to at least help what little airflow there is in this case. I was able to sell it to my cousin, so it has a happy home now. That beast of a CPU is definitely thermal throttling with that anemic cooler, but, they're not going to notice, hopefully, and day-to-day performance was still pretty good for Microsoft Word and Facebook, and will be much better that any laptop they were planning to buy to play games like Fortnite, especially at the price point they were looking for. Of course, now I get called if the printer won't connect, but you know how that goes...
@michaeljamesm 3 жыл бұрын
I love this case, built one 2 years ago managed to fit a 2070 and an i78700k with a 140mm aio in front
@kooladrian02 2 жыл бұрын
That 2080 super is a beautiful card
@Sirwest299 3 жыл бұрын
I'm surprised to see Silverstone here because many tech youtubers don't really cover their products.
@catch22frubert 3 жыл бұрын
Not many youtubers want to build a plain black box with zero rgb appeal and a long list of limiting requirements to get components to work inside said box. Its nice for sff enthusiasts, but thats a very small subset of the diy pc world.
@juanignacioaschura9437 3 жыл бұрын
Most High-Profile Tech KZfaqrs out there are covering the premium boutique stuff when it comes to ITX... And then complain about the stagnating ITX market (looking at Hardware Canucks). Silverstone fails to have impressive stuff anyway; since Corsair launched their SF series PSUs, no other brand was able to match them in performance and quality.
@nuckenfutz9983 3 жыл бұрын
If that's your actual entertainment center in the picture, pull your center channel forward! The waveguide is reflecting off the cabinet when being receded in the back.
@matthewmcsparren7534 3 жыл бұрын
Greg is playing baseball with all of these curve balls he is throwing at us!
@flipsideca 3 жыл бұрын
I've been running an i7-4770 with AIO and Zotac GTX 1080 Mini and EVGA 500W power supply in the non-usb-C SG-13B case since 2016. The AIO is a coolermaster 120 with a push/pull fan configuration. It's my daily driver/gaming "toaster".
@allmarknobite8726 3 жыл бұрын
You always land on your feet, Greg. Nice work, bud.
@bouncingtorch5280 3 жыл бұрын
Pre-built Pog
@hardcorehardware361 3 жыл бұрын
I absolutely love Silverstone cases, I have the RV01 RV02 GDO09. Fantastic cases. Lian Li Be Quiet and Silverstone are my go to case manufacturers.
@jeremyhillaryboob4248 3 жыл бұрын
I was looking at this case for a semi-portable PC, definitely going to pick one up now. Edit: I should also mention that you're supposed to slide the GPU in from the front of the case.
@Tribute2JohnnyB 3 жыл бұрын
Still use my Ryzen 3600 build in a Silverstone SG13-- works great 3 years on. Had a EVGA 550 G3 in there for a year. A full sized modular WILL work, but ohh boy it kills your airflow. Pair that with the standard cpu fan and it's a hot box. Installed a Fractal ION SFX 500G ps and a Corsair H60 AIO and never looked back.
@Tribute2JohnnyB 3 жыл бұрын
Should have mentioned that I used the same Noctua AM4 cooler right before the AIO option-- works, but heat was still crazy.
@OldestGoat 3 жыл бұрын
Really enjoyed this build. 4 GPU changes into it, the 6800 comes out. I’m interested to see how it does on the OLED. It should do very well. I have an AIB 6800 and can play some rather demanding titles at 120-140 FPS @1440p paired with just a 3600. I’ll be looking forward to the upcoming video.
@Zack-fu8sn 3 жыл бұрын
Arctic freezer ml 120 is not only an aio, it has an active VRM cooling fan built in
@haroldpotter5911 3 жыл бұрын
Almost identical to my own build. I bought the Silverstone adapter for the SFF PSU - it has a little more ventilation. I did find that the Noctua low profile cooler did not really provide enough cooling though (CPU temps over 55 degrees C under idle load with a ASRock X570 Mobo). I had to use the Silverstone AIO. I can assure that that it fits. Just. My "gotcha" during the build (and there always is one) was that the ASRock X570 mobo uses the Intel cooler spacing rather than AMD. Had to buy the Noctua low profile cooler for Intel chips, then swap it out to the Silverstone AIO when I found that the cooling was inadequate. I'd be interested to see what temperatures you get. Mine were way too high.
@mr.electronx9036 3 жыл бұрын
got this one in black & white...👌👌👌
@Lordserpentus 3 жыл бұрын
the reason HDMI is still very popular I think is because its easy it also carries audio signal, I don't know if display port does yet, but the common layman or woman, doesn't have a fancy setup like most of us do, so HDMI is very standard because its easy and convenient.
@ewa4792 3 жыл бұрын
your tv setup its better than my gaming one :D
@mrjacobvich9323 3 жыл бұрын
Very entertaining videos. Love the look of that Noctua CPU cooler and the fit on the two GPUs was oddly satisfying to me.
@mikeshepparduk 3 жыл бұрын
My recent main build uses the Sugo 15, much the same as the above but support for 240mm AIO and 3 slot GPUs. I have the 6900XT Red Devil and it 'just' fits. Great video, ITX is awesome.
@murraystechtime8530 3 жыл бұрын
Great build, thanks for leaving in the oversights. Awesome job and video :-)
@jboy9750 3 жыл бұрын
Looking forward to your living room gaming setup.
@ronstewtsaw 2 жыл бұрын
To make my new ASUS Dual RX 6600 XT fit, I cut two short notches in the frame, and then used pliers to bend the frame flat where it had been 90 degrees. And I didn't put the cover back on so airflow is no issue. Dust will be, of course.
@wadeepperson6906 3 жыл бұрын
I had to use a large PSU sucks but it works I actually ran my front fan backwards because there's a lot of heat pooling in the back around the CPU vent. It seems to work better overall running the fan as an exhaust.
@ApexLodestar 3 жыл бұрын
I'm a big fan of Silverstone products but man some ITX PC cases are challenging to work with. Granted I do like ITX cases ever since seeing Nintendo GameCube's tiny shell. Great video as always, Greg.
@kuzugu671 3 жыл бұрын
ah i kinda want to see greg build in something like a velka 3 now because he thought this one was bad lol. Did a velka 5 2.0 build a little while ago and this was really spacious xD
@NipplesOfDestiny 3 жыл бұрын
That PSU is like buying a Lambo with no wheels
@ryanharris6788 3 жыл бұрын
I love this build. Super awesome. Ive never owned an AMD card but would love to try one out in my pc.
@geekmastermind 3 жыл бұрын
Isn't that an off-center speaker, now? (Thank you! I'm here all week! Try the buffet!)
@93SupaFly 3 жыл бұрын
im using this case currently. You should do push pull 120 rads for even greater temps. and yes psu face down. But my setup is even crazier..i put 2 60mm fans on top of my gpu blowing air out through the vents above. and I put another exhaust 80mm fan on right vents beside PSU. Stonks temps
@derekmccord3798 3 жыл бұрын
Haha nice Leclerc clip!
@ewanb1632 3 жыл бұрын
"Clean with Me as Greg cleans his dusty AV equipment haha. nice build
@Shrek_Boi5155 3 жыл бұрын
cool and good. I built mine and my brother's pc with this case
@GregSalazar 3 жыл бұрын
It's a great case!
@Shrek_Boi5155 3 жыл бұрын
@@GregSalazar Yes indeed. Also i found this pcpartpicker build where someone managed to fit the rx 6800 xt into this case but it was quite difficult. Additionally, they installed the same silverstone 120mm aio. For my brothers pc, the corsair h60 aio (2018 model) fits with no issues. pcpartpicker.com/b/3brV3C
@chase-collins 3 жыл бұрын
Reminds me of the Dan cases, have worked in those and always needed to be specific with hardware. Rear-blowing cards are a pretty big must in these small cases, big temp difference from what I have found.
@0mnikron702 3 жыл бұрын
Happy to see your giving some love to the itx builds Ive moved on to itx only for my main buiilds I like to see how power I can cram into a itx case
@BenyaminLorit 3 жыл бұрын
It blows my mind how that triple fan card fits in this chassis. What the hell
@oblivionlord1242 Жыл бұрын
If you use an ATX psu it can sct as an exhaust for the processor if flipped, also handy...
Hardware For Gamers
Рет қаралды 10 М.