I love the tan wheels. A gold chain and gold pedals. Keep the black cranks

A company by the name of SlikGraphics make officially liscenced Fox fork decals and you can order them in custom colours if you're curious Tom 👌Also a gold TRP Quadium brake with a gold Shimano Saint bb and some nice polished cranks as you said would be sick

I think the tan tyres suit the bike, it's looking pretty sleek!

That frame is so sick Tom. Can’t wait to see the finished build. So slick !

Love the tan walls Tom 👌 grips in a similar tan/gum colour would be sick!

The Golden Sram XX1 cranks would look sick🤘🏼

Gold gusset slink chain would look sick

That new frame is super sick, it's a really nice color scheme and goes well with so many accent colors! If fox wont do gold/champagne color logos a Matt Red, Matt Navy or Pepsi Blue or a Nardo Grey would look sick as well. Really stoked you're building up the new bike & can't wait for you to get back to riding again! Just had a big neck/spine surgery & am laid up no riding, gym ect for 8 weeks so these videos really help make my days more enjoyable & give me ideas for my own bikes, riding ect when I'm cleared. Thanks for putting out the videos still even though you are cleared to ride yet either!

I genuinely hope you recover soon man! I love your vids and your ride style!

Reality check 101: I'm an old guy, I never dirt jump off the ground more than a foot, I haven't build a single bike in my life, I have trouble adjusting the current rear brake of my 24'' BMX, and yet all these bike builds are so awesome, I watch as much as I can to understand the parts, dimension, and the how to. I would love to build one because it gives great aesthetic pleasure.

Tan wall tyres look sick, gold chain yep 🤙🤙🤙

Thanks for the Send it T Tom. Nice quality, love the green Looks sick!😁

Bud ive been watching more of your stuff since the lockdowns and ive gotta say, you bring genuine enthusiasm to the sport without the flashy sponsor shout outs and marketing. Keeps me watching man, love it!

Great build Tom looks great 👍👍👍

Looks sick how it sits!!! Those tan wheels are so nice, all the colours go together really well!

Hey Tom Cardy! New bike day rules! Those custom frames for you Sam Pilgrim and Yannick Granieri are awesome! Haibike probably gets those welded by the best of the most experienced welders at the frame factory! Soon you will ride again! Start a Cardy countdown to when you are allowed to saddle up and boost to the sky again and keep us informed! Ride ride ride!

What better way to spend time with a squishy spleen than to play with bike parts! That's how I kept up hope. A damaged spleen makes a good built in torque wrench.

Looks sick can't wait to see it completed 🥰🔥👌

This is an absolutely stunning bike!!! 💥💯💥

Another good looking ride 👌

Gold Hubs, Gold Chainring, Gold seat clamp and either a Gold stem or Gold handlebars but not both............and then its banging Tom ✌😁👌

These tanwalls look sick!

I love the tan walls!

love the tan and a gold brake lever

Nice Bike! I think some Sram XX1 Cranks in Gold looks Sick! And some nice black grips!

Bike looks sweeeeet 👌 bronze break housing would be dope 🤩

Definitely keep the tan wall tyres! Fox has fork decals in Kashima gold. Add gold bolts (matching the stem cap), to the bar stem plate and brake rotors (if they’re not center lock). The new rig looks brilliant! Keep doing what you do!

In my opinion, those forks with no stickers on it are fine. Can't wait to see you shreding again !! (Inglish is not m'y current language so sorry if i'm wrong)

I think the tan tires are just fine. It looks good.

Id keep the hints of red bro it looks decent from where I am sat. I have a gt chucker in black n white customised as a DJ and with the same tan walls. Epic bro can't wait to see it finished and you riding again

The bike looks amazing.

Your DJ is looking sweet!!!🤙🏽 I ride a DJ Specialized P3 and a DJ Felt I mostly street but been hitting the pump track and bike parks. Bike Life 🤙🏽

Your plan as described is perfect I think - I would consider adding a crank stop though.

I think black collars on the grips and keep the tan walls, they look awesome!

the red on the cranks and on the wheels and the bottom bracked is insane but with out is good to.

She's a beauty! My vote is to keep the tan walls.

I think the red looks awesome

Tan tyres looking 👌🏻

Vans tan waffle grips would look sik with the tan wall tires. I like touches of red and blue colors personally. Right on Cards!

for headset cup mounting we have C-clamps, bar clamps (the ones with screw handles) or a bolt w/ large washers, all work quite nicely :}

Wow. I like this bike 😍😍😍

Go with the tan wall mate 👌 and maybe gold stem bolts great bike mate 👍

I like it so much!

I think you should continue with the gold/bronze/tan/black theme. The tan tyres look good I don't think white would be as good. No to chrome, go for a bronze/gold brake lever. Bronze/gold or black grips and you're right to go with the gold chain. I never consciously thought about colour coordinating my bikes but thinking back about it they have always ended that way, most recent build was white with black highlights. Awesome video as usual, thank you keep them coming, and looking forward to seeing you back riding.

Keep it all black and gold

The bike looks sick just like that keep the tyres I'd definitely get a gold bottom bracket for it and and gold half link chain I like the chrome magura brakes Kara has fitted to her bike that would set it off maybe even go proper street and fit a front brake 😉

🤟🔥nice bike

Keep the tan side walls, goes well with the gold! Careful to mix chrome and silver with gold. Try and stick with gold or black all over! And if Fox don't give you custom gold forks, they've lost me as a customer for life! Well deserved!

Get a gold hollow pin half link chain, I run one and it looks sick. Otherwise get a gold BB and get them fox decals. Shimano Saint brakes might like good as they run with the black and gold theme Tom!

3:22 hilarious :D

Love the bike storage area. What is the kit? It looks hinged? Never seen anything like that. Cheers 😊

tan looks nice

Awesome looks sick keep tanwalls

I dream of building a FGFS-jumper out of a DJ frame, rigid CroMo fork and an ISO cog on the rear hub!

As far as DJ components goes I've only had real problems finding chainrings in the UK recently* . It does depend how fussy you are regards colour but there's plenty of Hope kit about (I've recently built some Hope/Chaos wheels) and at time of writing Wiggle have DJ Bombers in stock!!! Gusset also have Double Six sprockets in stock again. * I run a half-link chain to keep my wheelbase short which means a non thick/thin chainring. Good luck finding one of them atm (32t, 4 arm, 104 bcd, 90ID if you have one) Edit: Also, I hope you don't want yellow stickers on your Halo Chaos rims right now ;)

I reckon go Gold decals, black cranks, collars, grips, and brakes then controversial but Blue (same as the damper control on the forks!) for chainring, bb etc!

some side company's ,make really nice gold fox decals

Keep the tan walls and a gold chain, gold seat clamp 🤟

To seat my bearing cups I have a 1” bolt, nut, and washers so i can slowly press them into the head tube

tan walls tan/gum grips gold chain and gold rear caliper

Been waiting for this video

Honestly I would just scrap the white or tan sidewalls altogether and go full black. I think it would make all the other gold accents pop and stand out more. But regardless of what you choose, it's going to look sick!

If you want to take it to the next level, take off all of the ano parts to strip the color and polish them all up, or have it anodized gold, new gold stickers or decals on the cranks and rims too, tan wall is better with gold than white, gum color grips would work with the livery scheme tie in tan wall tires as well. 7:02 There is a safer way to do that which puts less forces to areas of the frame that aren't designed to take certain types of abuse(like the top tube in a vise with downward force to the head tube) without the press tool: Place the lower bearing cup on a solid surface, place the frame on top of that bearing cup then place the top bearing and wood like you have, hold the frame steady or brace it loosely with some foam or soft padding when you hammer the wood it sets both bearing cups and keeps most of the hammering forces in the head tube.

That wil look woooooooo😮😮😮😮

Silk Graphics do great fork stickers that you can customise to your colour requirements. So good, they've got all the makes, fox etc. Jusy bought some for my marin. So good. Based in Sweden but ship fast.

Awesome

tan tires, are similar to gold, the bike looks great

Nice! Talk to Matt Jones about some titanium cranks!

love to see how the videos hav progressed over the years man.i remember when you only had 1k subscribers hahaah

XT cranks will probably colour match the frame (are they suitable for DJ?) TRP gold brake as others have mentioned, Marzocchi forks as the damper and air caps are gold, or swap Marzocchi Grip damper and air cap onto Fox Kashima DJ fork (You dont need Grip 2 dampers for DJ surely), Hope/Disco gold centre rotor

idk about the chrome parts, but i see your thinking... I'd probably go for some Profile cranks though, especially if you want to go with a fleck of chrome in the colour scheme! but personally i'd stick as much as possible to the black and gold stuff, stealthy but blingy and smart without being overstated = cleannnnn

Think it looks sick breakless

Tom, the natural sidewalls don’t look bad. I’d go with black walled tires but definitely not white. gold hubs and possibly gold bars.

Tom, can you tell me where you got the table top tyres? I've been looking EVERYWHERE for them for my own jump bike build!! Bike looks sick!!

I would say full black tyres and let the gold halo stickers do the talking.

Tan walls are cool I'd stick with black and gold where possible

+1 for SlikGraphics

Chrome Hope brake with braided hose and gold chain

tan tires are somewhat easier to keep looking fresh than white-wall ones.. to my eyes tan goes quite nicely on that bike

What grips do you use I’ve been looking for my bike and I have no clue what to get

Can't wait to see you back on the bikes shredding. Which bike repair stand do you use? It looks very stable and good quality. Do you recommend it? TIA 😎🚴‍♂️

Cane creek titantium cranks, go for a mechanical brake street vibes tan walls look mint, leave the fork decals off wack a set of crank bros stamp 11s on too

Get the gold trp brake, it would match the colour scheme

Invis make some sick decals for fox forks

Chrome bars white wheels gold hand grips Tom I do great videos always

Seeing it like that, I think the tan walls will work really well with the gold decals. White walls could look good but might draw the attention away from everything else. 🤔 Now it's making me want to modify my dirt jumper. The only thing I have done is upgrade the pedals so far after I broke the bearing on the first set. They weren't made for a 126kg bloke to be riding on them. 🤪 You have some great ideas there Tom.

I think it would be sick with e wings cranks ( if you win the lottery) Trp Chrome brake Golden bb And the gusset Luck on gribs with little gold Bits insted of petrol

🤘🤘🤘

When buying a jump bike they come in medium or large what size frame is best...

it's perfect

bike looks sick! sram make a set of the same crank with a gold xo logo

Righteous

I am not up to date and I can't find any proper answer with Google. What are those FOX forks and do they do a model for 26 wheels specific for DJ or is it just a normal MTB fork for 27,5 wheels ?

No Sir. Those tan walls work much better with those gold fork decals that are surely on the way.

i like your old frame

Chrome sprocket would look clean

Run no brakes if you really love street riding.. lol looks good

Gum color grips and pedals or gold pedals, Gold seatpost, Gold chain ring

Were i can put my hands on a DRT11 FRAME?

Since it looks like you're running metal pedals, what about some gold ones?