BUILDING POWERFUL Ultrasonic Cleaner ll Complete Build Guide

Рет қаралды 77,869

Күн бұрын

Thank you, my Patrons, for making this video possible - / hamstertime
Link to the project download - goo.gl/TX3n68
►Patrons
✔ Cooperation -
✔ Instagram - / hamster._.time
Hamsters welcome you, friends.
Today's issue will be devoted to the creation of an ultrasonic cleaning bath, which is based on a 60 W Langevin piezoceramic emitter. We will look at what the device consists of, how to configure it, and we will learn how to clean things no worse than Mr. Proper.

Пікірлер: 107

@felipepisaneschi1396 3 жыл бұрын

This video deserves millions of views! Cheers from Brazil

@RaivoltG 3 жыл бұрын

I loved this video! I have no idea how you made the ultrasonic cleaner but it was cool to see it work so well! More videos please!! Thank you!

@SergioOkuma 3 жыл бұрын

you have a special kind of videos for special kind of viewers... You creation is amazing, amazing editing, sound, subtitles, explanations... congratulatios 2 share a such rich wisdom.

@transmitterguy478 3 жыл бұрын

The best ultrasonic cleaner video yet. I learned a lot and you did a lot of testing I now do not have to do. THANKS!

@SeattleRingHunter 2 жыл бұрын

Actually not the best as they violate rule number in ultrasonic cleaning. Never place items directly into the the tank. Use a proper basket or hang items via string or clips to suspend them so they don't touch the tank walls to reduce tank damage. Cheers, #SeattleRingHunter

@Lina-nm6jd 3 жыл бұрын

First video I watched, fell in love! Great content, keep it up!

@kashubelua 3 жыл бұрын

This is work, great experiment. THX and respect!

@TheHouseOfMoth 3 жыл бұрын

Excellent video, thank you :)

@woodworkerroyer8497 2 жыл бұрын

Thank you! This level of project is far above my level of understanding when it comes to electronics, but it is very interesting and cool. Now I want to build one of these myself...

@theoracle6005 2 жыл бұрын

Great Video - but I wouldn't advise to immerse your fingers in an ultrasonic bath as it causes cell/muscle damage to your fingers.

@gangrel1055 2 жыл бұрын

Good job man!!... VERY thorough... I'm not exaggerating by any means

@zachreyhelmberger894 Жыл бұрын

Very cool!

@Corum001 2 жыл бұрын

Bravo and thank you.

@Topy44 3 жыл бұрын

Excellent video, keep it up and this channel could grow big!

@danmoretti8898 2 жыл бұрын

You're hilarious and smart. Thanks for the fantastic information and build!

@jovisyout9180 2 жыл бұрын

look at this excelent video... man.. that briliant you are amazing, Ive learned a lot with it!

@mikaelelseth9722 2 жыл бұрын

THANK YOU!!

@ichewtoast111 3 жыл бұрын

Awesome!

@yodad4776 10 ай бұрын

I've got that exact cleaner off Ali express I find it works fantastic cleaning up PCB nicely .cleaned up the wife's jewellery nicely

@mightymoaman2485 3 жыл бұрын

Awesome video man!!!!!!!!

@hamstertimeen 3 жыл бұрын

thnx

@picflight Жыл бұрын

Very entertaining!

@butchgarner3911 Жыл бұрын

Go get that beer!! Great video and explanation! thank you!

@mikaelelseth9722 2 жыл бұрын

AMAZING!! MORE PLEASE!! You should be in the millions of views...people are missing out!! Deep KNOWLEDGE!!

@tecniconotebook 2 жыл бұрын

the problem is that the archive is all in russian :/

@grahambate3384 3 жыл бұрын

gr8 video mate

@ribbyramone 3 жыл бұрын

Great content! I would also praise your English. Great job!

@alcidespereiradasilva6652 Жыл бұрын

Parabéns pelo trabalho, muito bem explicado, não adianta só comprar é bom saber como funciona.

@DamithaNadeeshaWanniarachchi 2 жыл бұрын

Wow👌 that intro is awesome 👌👌🔥

@ayaweb 4 жыл бұрын

Wauuh so cool video! I like it!

@gelosoriano 2 жыл бұрын

Just watching the first 1 minute with the hamster cooking a la Breaking Bad - SUBBED!!!

@felipebl179 3 жыл бұрын

Excelente trabalho!!! Parabéns!

@wessonmiller7900 2 жыл бұрын

Instablaster.

@ciurdypsyco Жыл бұрын

i noticed that if you move around objecs in the chamber they will clean a lot better

@intothewrx 3 жыл бұрын

good quality video

@JonathanYankovich 4 ай бұрын

Could you do a video on making an ultrasonic cell disruptor for doing extractions?

@--973-- 3 жыл бұрын

Merci

@Jeremiah13tears 3 жыл бұрын

Hamsters rule! Are those Robinski dwarfs. I had 3 they were amazing! Just wanted the wheel All day!! LoL.

@radamanthys847 3 жыл бұрын

UAU! WOW! Tks

@jewbertsheckelstine7319 3 жыл бұрын

This is so cool!!! I wonder if you could use this to make a vibrating sword!

@RicardoBHubner Жыл бұрын

maravilha de vídeo cara. parabéns

@lachemistry1365 3 жыл бұрын

Nice work bro Love from pakistan👍

@MandyWoodArtist 3 жыл бұрын

This is brilliant - I love it - should be on TV - love the accent - love the humour - amazing information! Can someone please tell me what the white powder for cleaning the coins was?

@hamstertimeen 3 жыл бұрын

Powder -Трилон Б

@DougWoodrow 2 ай бұрын

Trilon B, or Tetrasodium EDTA: en.wikipedia.org/wiki/Tetrasodium_EDTA

@toxomanrod 2 жыл бұрын

Hello, I am making this and have a question. Does the size of the vessel/container make a difference in performance? I'm wondering if having a larger container makes the amplitude or 'strength' of the ultrasonic weaker. Also, does the placement of the transducer matter? I'm curious what happens if it is asymmetric. Excellent video! Thank you

@SeattleRingHunter 2 жыл бұрын

Interesting video however refrain from placing items in your ultrasonic unit without a tray! The vibration of objects directly in your ultrasonic tank can make microscopic damage to the tank walls and degrade your unit. Always use a basket or hang items with a string or clip so its not touching the tank. Cheers, #SeattleRingHunter

@enriquevidal272 11 ай бұрын

Genial tu trabajo...felicitaciones....¿que pegamento usas para pegar el transductor?

@bigzeeification 2 жыл бұрын

Great video! Thank you. Any chance you could upload the document again? Theee link you provided in the description is dead. Thank you

@hamstertimeen 2 жыл бұрын

I check the link (now) - it works. Maybe you can use VPN

@alvaliable 2 жыл бұрын

+sub grettings from argentina :)

@yavorkolev3806 Жыл бұрын

Great work man , but, need to know , why not use hifi amplifier and pc sound card generator

@Leonardo-eu9rj 2 жыл бұрын

Hi, excelente video! Gotta question... How did you make transformer center tap? Txs11

@adriandaniels8458 3 жыл бұрын

please provide details on the transducer used in this video. Thanks

@12762161 2 жыл бұрын

very interesting. Could you share the list of real components. It will be very helpful. Thank a lot, again :)

@PureVenomthe1 3 жыл бұрын

5:23 Ahhh Vadim Blyat!!!!!

@omsingharjit Жыл бұрын

18:29 it's bad idea to put Object on bottom it should e heald above because if it touch the source area it blocks the waves and change the resonance of the transducer .

@dominykasbielka2711 3 жыл бұрын

What is the best to use to attach transducer to unit ? Epoxy ?

@luciolopez5143 2 жыл бұрын

Excellent video! In the control diagram, I am in doubt on Tr1, is it receiving two voltage levels? At the output of the MOSFETs there is a capacitor arrangement and a rectangle with a V inside, is it a resistor or what element is it? Another thing, any recommendations to be able to see the files? Since when wanting to execute the programs they send error. I would appreciate your help and again congratulations on the excellent explanation.

@hjsspin 2 жыл бұрын

The rectangle box with a V inside should be a resistor, as seen from the picture of the circuit provided by the author in the rar file.

@mikep8080 3 жыл бұрын

A visual drink guide and a kama sutra guide side by side........ 4:05. Now thats a lifelong bachelor pad if I ever saw one lol

@ericison6032 3 жыл бұрын

I also prefer to use my loud power tools at night

@mikep8080 3 жыл бұрын

@@ericison6032 As deadpool would say "Isn't that the only time you need loud tools?"

@jmdb1414 2 жыл бұрын

Do you know if there is a simple way to modify the frequencies +/- 2 Khertzs of cheap ultrasonic cleaners to add sweep frequency functionality? I wonder given the relationship between voltage and frenquencies if a simple manual voltage potentiometer could work. If that would not work, what are simple way of achieving this?

@user-bh2pr7ht3w 4 жыл бұрын

На этом видео голос более приятный чем на прошлом теперь ваще идеально всё

@jvmusicph 2 жыл бұрын

I have paint bottle had dried for a month, can I use ultrasonic cleaner to dilute the paint inside the bottle?

@anderstunell5133 2 жыл бұрын

What salt was it? NaCl? Nice video 👍

@halogeek6 3 жыл бұрын

That moment when you can finaly hear past the accent and suddenly you realize you have spent ten minutes listening to a Russian bot.....

@RynaxAlien 3 жыл бұрын

How much power such transducer requires and is ear protection required?

@ricoshadeschannel173 Жыл бұрын

hello i just want to ask if the ultrasonic heating the water? thanks

@ahmedmostafa-hp3sj 2 жыл бұрын

How can you measure the output voltage signal of the transducer by the oscilloscope ? it is high voltage and may damage the oscilloscope

@DeezNutz-ce5se 8 ай бұрын

Hi do you share the circuit diagram for the driver and list of components? Ps: use a bottom grating stand with small seperating distance from bottom for heavy object to sit on for better performance.

@Savinmoneyforparts 2 жыл бұрын

how many liters of water can one of those tansducers effectively move? does it work with more water just slower? or not at all?

@owenjackson7207 3 жыл бұрын

5:24 😂

@electrolism6769 3 жыл бұрын

hi. whats type of 500p cap?

@harshitrathore8168 Жыл бұрын

Do this device can work on variable frequency?? I was searching for an ultrasonic transducer that can work on variable frequency??

@abeditani8293 3 жыл бұрын

25:14 for ink . What liquid you use ?

@klamup 2 жыл бұрын

@5:27 I tried, but they didn't stay that way, so I have to stop until they return to a resting position, and then the problem becomes reccuring. Also I couldn't find the thermometer or ANYTHING from the manufacturer you mentioned.

@KhoirulAnam-jp5ql 3 жыл бұрын

The list of component please ?!

@audiophileuser 3 жыл бұрын

i'm impressed! Let's drink vodka comrade!

@pocketrocket6604 3 жыл бұрын

Hello Hamster Time, this video was really informative, thank you! I do have a question: You seem to be pretty experienced. Do you have an idea what kind of motor I could use to create a vibration as strong as possible with a high frequency with an battery in a place beeing around 40x40x20 mm big? Have a nice day mate. Greetings from germany. :)

@hamstertimeen 3 жыл бұрын

Hi, I don't even know how to help yo, where will it be used and what load is needed?

@pocketrocket6604 3 жыл бұрын

@@hamstertimeen It will be used close to body, so a low voltage is better, if that's what you mean with load. Probably 5-12V. Or do you mean something else?

@carlosvargas2907 3 жыл бұрын

Look for string resonance, the principle is the same, just velocity of mechanical waves depend on sound velocity of the medium you're to vibrate. If you couldn't find an answer, I'll try to help you.

@Bruno-P 2 жыл бұрын

Are the hamsters/mice hurted by ultrasounds?

@TonyLing 2 жыл бұрын

I've read that it is a bad idea to US items when they are rattling around at the bottom of the tub. Is this true?

@yodad4776 10 ай бұрын

That looks like a darlic

@JM-yx1lm 3 жыл бұрын

I thought having the part on the bottom like that was bad? And also having the water level low like that?

@imurbestfriend5678 2 жыл бұрын

I think u interested in karma sutra😂

@Jamie-st1up 2 жыл бұрын

@Hamster Time EN Hi I'm a student and i can not really open or view lay6 files or spl7 files. Is it possible if you could upload with jpeg or pdf? I'm sorry if its inconvenient.