Building the Go Bar Deck for my Acoustic Guitar Build

Building the Go Bar Deck for my Acoustic Guitar Build | Building an Acoustic Guitar

Рет қаралды 4,329

Күн бұрын

Its time to prepare the Go-Bar Deck for the acoustic guitar build. I first designed a set of radius dishes in Fusion 360. Then I got some hands on time with a cool CNC machine to cut out the dishes. After assembling them with some threaded rod, the go bar deck is ready to go. I can't wait to start gluing some acoustic guitar braces.
Check out the Super Grit Website (#notsponsored) - www.supergrit.com/
See the Go-Bar Deck in use - • Building an Acoustic G...
-- Visit My Website--
www.homebuiltworkshop.com/
-- Check Out My Handmade Guitars --
www.hayleyguitars.com/
-- Save 10% and get some awesome CA Glue from Starbond --
bit.ly/2WJmxbL
-- Ways To Support HBW --
www.homebuiltworkshop.com/sup...
-- My TeeSpring Store --
teespring.com/stores/home-bui...
-- My Amazon Affiliate Store for recommended products--
www.amazon.com/shop/homebuilt...
-- Join the HBW Built not Bought Facebook Group --
groups/homebuiltworkshop/
-----Connect on Social Media-----
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
----- My Mailing Address -----
Home Built Workshop LLC
P.O. Box 84
Peyton, CO 80831
-- Join in on My Weekly Live Stream (events calendar) --
www.homebuiltworkshop.com/eve...
Please remember when using tools of any type, there is the potential for injury. You are responsible for your own safety. Make sure you know how to use your tools properly, work at your own risk, be safe, wear your safety gear, and most of all, have fun!
#guitarbuilding #acousticguitar #homebuiltworkshop

Пікірлер: 29

@borgonianevolution 2 жыл бұрын

Nice build. That tip on using floor sander disc's instead of a "specially made for luthiers" sanding disc at probably twice the cost is gold. Not sure how much you plan to be using this but you may want to put in some sort of sleeves in the MDF where the rods go thru. Gonna be a lot of in and out as well as wobble and the file action of that all thread. Those hole will go wonky pretty fast.

@homebuiltshop 2 жыл бұрын

I'll definitely be adding to this jig. I'm planning to double up on the thickness and probably adjust the length of the threaded rod too. Its a work in progress at the moment.

@justinmcintyre2753 Жыл бұрын

I can't tell you how appreciative I am of all these videos you're making. I'm tooling up to start building my first acoustic, and I'm all about the diy tools! I hope your channel explodes with subscribers. Keep it up!

@homebuiltshop Жыл бұрын

Thanks! Spread the word. Good luck on your build. It's an amazing project. I'm planning to start my 2nd very soon.

@martinholloway7694 Жыл бұрын

Great video! Thanks for taking the time to make this content. Really good stuff.

@FrugalFixerSpike 2 жыл бұрын

nice Jeff, Peace and Progress!

@paulwaldrop 2 жыл бұрын

looking good

@MarceloMallmannDias 2 жыл бұрын

Nice!

@sentpacking3879 2 жыл бұрын

Great video. !!!

@SkyscraperGuitars 2 жыл бұрын

Great stuff Jeff!

@homebuiltshop 2 жыл бұрын

Thanks man!

@hacgarimman9660 Жыл бұрын

That's genius how you just turn it over and it's ready to rock. Very clever. New to your channel. Subscribed for the acoustic building series and I've seen a fair few great ideas already. Well done. Thinking out the box. Keep up the great work matey!

@thefreese1 6 ай бұрын

A couple tips : .1 you shouldn't have to contour sand your neck block to the shape of the mold . Because your mold should be absolutely flat right there in the area that your block is supposed to be . Because the first thing you do when you attach the neck is to sand the outer part absolutely flat and perpendicular to your centerline. This is critical so that your neck will fit tight against the body while maintaining the centerline.. also helps in routering out the V-block. So actually sanding it to the contour makes it so you have to sand it even thinner .. ask me how I know..lol 2. I think your go-bars might be a few thousands too thick. And make some shorter ones because as you get away from the middle of the deck the space is shorter . Also helps to have the top plate with the radius facing up so you don't have as much of a variance of bending on your Go-bars.

@myhermitlife 2 жыл бұрын

💥💥💥💥

@crazyrees23 3 ай бұрын

What was the sand paper size?

@robertr4193 2 жыл бұрын

I think you might want to shorten the lengths of the all thread as well it would also make if a bit more ridge. You also mentioned in your live stream that you wanted to double up on the thickness of the MDF which will help as well. It is plenty high enough. Maybe take off 10" to 12" inches

@homebuiltshop 2 жыл бұрын

I agree that it could be shorter. Like this whole process, it's a learning experience for me. The all thread will be easy to adjust the height. I will be getting some material to make it thicker as well. We'll see how this works.

@borgonianevolution 2 жыл бұрын

Wouldn't the shorter height just make it harder to bend the flexy stix into place to hold the braces during glue ups?

@robertr4193 2 жыл бұрын

@@borgonianevolution The Flexible sticks would just be adjusted in lengths to match the shorter distance between the top and bottom. Also in the long run the fiberglass rods he mentioned that he may switch to would also be a better option providing a more consistent pressure I believe.