Building the Sputnik V1.0 40m band ssb/cw regenerative receiver

Рет қаралды 9,248

Жыл бұрын

The sputnik tends to be one of my favourite receiver. This time i decided to make it using a pcb.
The circuit is not mine. It is from YO6DXE visit his website for the circuit and more details:
dxexplorer.com/sputnik-regene...
Thank you for watching! 73's

Пікірлер: 18

@G4KDXlive Жыл бұрын

Simple receiver projects like this can be tremendous fun. They’re sensive - and an adventure!

@sv2tcb Жыл бұрын

I love building these simple receivers and they turn out to perform really well. I am waiting to get my callsign and then more videos with this topic will be uploaded. Thank you for the comment. 73

@5VoltChannel Жыл бұрын

Nice 👍👍

@danielgue8399 Жыл бұрын

Espero que me salga el mío, trataré de hacer el anterior a este de el cual se baso dxexplorer

@EmersonCapuano Жыл бұрын

Hi sir. I did this receiver too and you earned another subscribe.

@sv2tcb Жыл бұрын

Thank you!

@fabiohernandez4694 6 ай бұрын

Hello, I am about to assemble the same receiver, what size is the plate? thank you LU6DKX - Bs As Argentina 73' DX

@sv2tcb 6 ай бұрын

I no longer have the receiver. You can find all information at dxexplorer.com/sputnik-regenerative-receiver/ 73 DE SV2TCB

@jotawski Жыл бұрын

Hi, Where are all components available, I mean as a kit? Thank you very much.

@sv2tcb Жыл бұрын

Hi! This is not a kit. I bought all the components from a local store. The components are common you can find them everywhere! Thanks for your comment

@ThinFreddysFlop 10 ай бұрын

Hi, do u have circuit change drawings for higher frequencies?

@sv2tcb 10 ай бұрын

I have for the 20m band if you want. You change the number of turns of the coil and a capacitor. If you want i can send you the details for the 20m band. Let me know 73

@ThinFreddysFlop 10 ай бұрын

@@sv2tcb yes please, and higher frequencies too? Many thanks!

@sv2tcb 10 ай бұрын

@@ThinFreddysFlop i have only tested it in the 20m band but it can go higher for sure. I will tell you about the coil . On a 2.5cm diameter pvc pipe you wind for the antenna coil (L1) 2turns and for the receiver coil (L2) 7 turns with 0.5mm diameter copper wire. I have 0-30pf trimmer and 100pf capacitor in series. Visit dxexplorer.com/sputnik-regenerative-receiver/ . 73