I Built a plastic model of TAMIYA 1/12 Kawasaki Ninja H2R.
- Reproduced as much as possible the parts omitted in the kit
- Muffler painting that makes the best use of beautiful plated parts
- Steering damper and side stand are movable
- Original coloring with the image of Japan
- Q: The video is long! / A: I know
The white part is the Gaia color Ultimate White (031), and the red part is the Finisher's Silk Red.
The dark part is a gray mixture of Creos Ueno Black (GX2) and the above white, and the gloss is adjusted with a Flat Base (188 or 189). Depending on the location, a small amount of Creos Primary Color Magenta (CR2) or Creos Olive Drab 2 (38) may be added, and the density may differ.
The clear coat is only a part of the tank and cowl, and all are Creos Super Clear III (GX100).
Thank you for many comments and likes in the Builder's view series! I couldn't reply to all of them, so I would like to take this opportunity to thank you.
Please click here for production details:
nandemo-seisaku.com/category/...
*how to make a spiral tube:
• 【プラモデル#04】治具でカンタン！スパイラ...
Please subscribe at:
/ @kenji-plasticmodels
Please follow me on SNS. (Each content is slightly different)
Twitter / nandemo_seisaku
Facebook page / nandemoseisaku
Instagram / nandemo_plamo
Chapters:
0:00:00 Opening
0:00:42 Assemble the engine block
0:03:45 Make a throttle drum
0:06:12 Paint the cylinder head cover
0:07:59 Paint the supercharger
0:11:57 Make a radiator pipe
0:14:05 Make an oil cooler
0:17:45 Chain
0:19:31 Brake
0:21:03 Flame
0:21:44 Side stand
0:25:23 Brake pedal
0:26:26 Engine and frame
0:27:39 Around the swing arm
0:31:31 Wheel's Partial silver paint and rim color line
0:34:06 Erase the tire parting line
0:35:43 Set the rear tires and wheels, and combine the swing arm with the frame
0:36:48 Muffler painting that makes the best use of beautiful plated parts
0:43:45 Production of muffler spring
0:47:07 Steering damper
0:48:39 Front fork processing and sensor part
0:53:14 Brembo brake caliper painting
0:54:20 Connect the caliper and brake hose
0:56:25 Make a brake hose guide from an aluminum plate
0:57:50 Paint the front fender
1:01:35 Combine around the front with the frame
1:02:12 Make handles
1:07:44 Exterior parts
1:10:06 Put carbon decals on the base of the meter and the supercharger intake pipe
1:17:37 Metal transfer
1:18:26 Open the tank side cover and attach the mesh
1:22:26 Paint the side cowl separately
1:22:57 Paint and install the screen
1:26:16 Install the movable steering damper made in the first half
1:26:55 Make an instrument panel（Uses LCD protective film）
1:29:14 Installation of fairing
1:30:27 Complete!
#model car building #Fullbuild