Building the Terminator episode 3 CPU port and skull details

Рет қаралды 24,035

5 жыл бұрын

Continuing the with the skull, adding all of the small details such as the CPU port, vents and other shapes and then finishing and polishing.
There's a lot of work condensed into this 20 minute video, it took me around 75 hours in total to get to this point (not including making the video itself).
In this series of videos I'm covering the building from scratch of a working Terminator T-800 robot (endoskeleton). No kits or premade parts involved, I'm going to be constructing all of it myself.

Пікірлер: 63

@Kurr63 4 жыл бұрын

I do not know the words that could properly convey my sincer admiration for your skills as a craftsman! Brilliant absolutely brilliant!!! Bravo sir!! BRAVO!!

@AndysMachines 4 жыл бұрын

Well thank you for the appreciation!

@oilscience9808 3 жыл бұрын

This KZfaq channel is seriously underrated.

@jovintagle2372 4 жыл бұрын

Your skill and patience is the stuff of legend. Truly amazing. 🤘🤘🤘

@AndysMachines 4 жыл бұрын

Well thanks! Yes, it does take patience.

@flexmcpee 4 жыл бұрын

Wow amazing workmanship! Gotta love the Terminator!

@AndysMachines 4 жыл бұрын

Thanks Alex! How's your endoarm build going?

@flexmcpee 4 жыл бұрын

AndysMachines haha I’ve not done anymore. I’ve been making guns for my 1:2 scale, namely the longslide and the uzi 9mm. Came out real nice!

@AndysMachines 4 жыл бұрын

Yes, I saw those on one of the FB groups, nice work! The vinyl skull you did looked really good too.

@flexmcpee 4 жыл бұрын

Thanks Andy. Nowhere on your level though! Excellent work. Looking forward to seeing more!

@SZAPT 4 жыл бұрын

Man, what a beautiful work! I'm sad of this video ain't being more (yet) popular! Wish you the best luck to finish that, it's going to take a while but will be a peace of art!

@AndysMachines 4 жыл бұрын

Thanks. Yes you're right it takes a lot of time, it's hard to convey that in a ~20 minute video.

@SkynetT800 4 жыл бұрын

I'm thinking of the best compliment I can give you! so I will say you're a heavyweight in fabrication!🌟👍

@AndysMachines 4 жыл бұрын

Wow, thanks!

@bedfordshiremodeller4491 2 жыл бұрын

Amazing attention to detail Andy

@AndysMachines 2 жыл бұрын

Thanks!

@venommwolf 6 ай бұрын

Im speechless. Its beautiful.

@maciekm7953 5 жыл бұрын

Wow holy moly 👍👏 Man this is going to be a piece of art. So much amazing work.

@AndysMachines 5 жыл бұрын

Thanks, I'll try and not disappoint!

@deeiks12 2 жыл бұрын

Amazing work!

@jamesfield5346 6 ай бұрын

Wow... That is so awesome...

@redstar749 5 жыл бұрын

OK, I have to say I'm super impressed. I cannot wait to see how this project turns out and what you plan to do with the electronics portion of it. Keep us updated with the videos!!

@AndysMachines 5 жыл бұрын

Thanks! Yes I have a few ideas for the electronics, but it will be a while before I get to that point.

@JustinMacri007 4 жыл бұрын

AndysMachines you shoujd make hud real working cpu abd Arnold voice and terminator theme

@lochfrass1 4 жыл бұрын

Unbelievable Peace of Art!!! Your a true Master and it's obvious that you know exactly how everything need's to look like and how you had imagined it in your mind. Those aren't skillz that you get over night, it's a long road of hard work and always trying to improve yourself. I simply love to watch your videos and I have a large respect for you and the whole project! can't wait for the next Episode, keep up the good work! best requards, Daniel btw.: sorry for my bad english, but I am from Austria :)

@AndysMachines 4 жыл бұрын

Thanks for your appreciation! Though I wouldn't call myself a master, I use too many different techniques to be able to really master any one of them, and it doesn't always come out exactly how it looks in my mind! I'm working on the next episode now and it should be out quite soon.

@SRS-GAMES 5 жыл бұрын

Looks great, I think you probably realise how much is ahead of you now, but I've subbed to follow this series. Dead jealous of your workshop, take me back to my engineering days.

@AndysMachines 5 жыл бұрын

Yes, there's a lot of work involved, not just the building, but the planning also. Maybe I should start keeping a log.

@Bravo4Whiskey 4 жыл бұрын

The eyes sir, have been some very impressive makership (if I found the correct words right now)

@markusoz1660 6 ай бұрын

Amazing work!!! 😳

@JonSpink 5 жыл бұрын

Thats fantastic

@AndysMachines 5 жыл бұрын

Thanks!

@xtremeink 4 жыл бұрын

You know what you should do... make the cpu port open and pop the cpu chip up on a servo, that would look sweet 😃

@AndysMachines 4 жыл бұрын

The port does unscrew but there's currently nothing behind it. I might add a chip later but it depends how much space I have left, the skull is going to be full of servos and electronics controlling other things like the eyes.

@EDcase1 10 ай бұрын

Wow, and I thought I had patience 😆 I definitely don't have the skills

@jeffersonsam5316 2 жыл бұрын

Very cool

@xtremeink 4 жыл бұрын

for FOOTS ACHE!!!! this is amazing pal! I cud watch this all nite!.... you got some skills there... god! take my money :) out this world! love it!!

@AndysMachines 4 жыл бұрын

😁👍

@InsanityNerve 4 жыл бұрын

This is awesome! Nice work man! I wish I had the tools to be able to pull this off myself.

@Jstride Жыл бұрын

So coolastic

@bedfordshiremodeller4491 2 жыл бұрын

God knows how much that this is gnna weigh once it,s all finished😱⚖

@102professor7 4 жыл бұрын

Grand👍

@jazcreations 5 жыл бұрын

Just found your build.... Really like your approach.... Let me know if you'd ever like any help, still got heaps of reference stuff if you need any.... I be watching your progress keep up the good work

@AndysMachines 5 жыл бұрын

Wow, thanks Jamie! I've been a fan of your channel for many years and you've provided me with the inspiration to have another go at this. I'm trying to keep everything as light as possible as I plan to add animatronics later, which is why I'm building it from sheet metal, but I may need to cast some parts. I'll be in touch if I get stuck on any of the details!

@jazcreations 5 жыл бұрын

@@AndysMachines By all means let me know if you need assistance and whereabouts in the world are you ?

@AndysMachines 5 жыл бұрын

I'm in the UK, about the furthest opposite point on the globe!

@johnoktavec 4 жыл бұрын

no bondo was harmed in the making of this film!

@octaviushorsfield9045 Жыл бұрын

underated asf, ima try this and fail

@justsomeguywithanfc1324 4 жыл бұрын

So this is how skynet would build terminators if there wasnt an assembly line.

@JustinMacri007 4 жыл бұрын

He's more avanced

@PretzelSage 3 жыл бұрын

skynet definitely didnt start with assembly lines. They needed humans to build alot of things at first

@user-lw5kq1fc7b Жыл бұрын

Сложная конструкция головы проточка загибы прорезы . Могли бы по проще сделать .

@comradeweismann6947 4 жыл бұрын

I'll be back

@mariashatova9987 6 ай бұрын

Skynet could not do better)

@pollyg562 6 ай бұрын

i wonder what % of this could be made from found partss, i see the tricep on the real guy looks like the bottom of a drum pedal

@AndysMachines 6 ай бұрын

For the original movie prop they used a lot of found parts and standard hardware parts, many of the small details on the skull are model RC parts, the recesses on each side of the skull are actually the gearbox casing from a Tamiya RC car. Not sure what they used for the arm pistons, but could well have been parts they found or adapted.

@user-lw5kq1fc7b Жыл бұрын

Сами себе усложнили.

@user-lw5kq1fc7b Жыл бұрын

А почему болты именно шестигранные а не простые под гаечный ключь так может проще на шурупах было сделать чем на на болты шестигранные.🤔 Сами себе усложнили.

@Star69ca 6 ай бұрын

Видео не про то как схалявничать или кликбейт, славянин.

@user-lw5kq1fc7b Жыл бұрын

Сложная модель конструкции могли бы и заделать по проще.😆😆

@bedfordshiremodeller4491 2 жыл бұрын

Are you using any 3in1 Oil? Because it,s metal screwing into metal? 🤔🤷‍♂️⚙🔩

@AndysMachines 2 жыл бұрын

No, but I generally try to make the screw and threaded hole from different metals to avoid galling. stainless into stainless can be bad and aluminium into aluminium worse.

@bedfordshiremodeller4491 2 жыл бұрын

@@AndysMachines True