This one really turned out beautiful with a bookmatched top and infinity edges. Things like this are what make woodworking enjoyable!
Пікірлер: 71
@northernhumidor56159 ай бұрын
Great project , a few tips from a lifelong bespoke humidor producer, no need for dominos in you’re long grain glue up , just quality pva glue, also no need to “pre soak” you’re edge joint. Spanish cedar is the standard for humidors( it’s actually a mahogany species), always wear a respirator as the dust is nasty on the lungs. when edge banding try 3m luthiers tape, it has elasticity to apply clamping pressure . We never clamp edge banding.
@SpaltedStagStudio9 ай бұрын
Thanks for the tips! I really need to get better about wearing my respirator around the Spanish cedar. I tend to overuse my domino, but I gotta justify the purchase somehow haha.
@ch3ckmateAI4 ай бұрын
Hello, we are going to make a new Humidor and we don't have much information about it. Can we do this using nails and any wood glue or will these damage the cigars? We have 18mm thick cedar wood and we will not put extra cedar wood in it. We will cover the outside with 5mm mahogany leaves. Our aim is only to preserve the cigars at a very good level, we are not interested in aesthetic appearance. Could you please inform us about how we should do it?
@darkgreen90985 ай бұрын
Man I loved this process, thanks for this posting!
@SpaltedStagStudio4 ай бұрын
Thanks for taking the time to watch!
@TheMoonlightCraftsman10 ай бұрын
Excellent craftsmanship
@SpaltedStagStudio10 ай бұрын
Thanks!
@jimrosson670210 ай бұрын
Great work looks beautiful
@SpaltedStagStudio10 ай бұрын
Thank you!
@andylong658910 ай бұрын
great tip on the backer piece for the sled.
@SpaltedStagStudio10 ай бұрын
Thanks! I definitely messed a couple cuts before I came up with that lol.
@DsHardWoodCreations10 ай бұрын
Very nice work
@SpaltedStagStudio10 ай бұрын
Thank you!
@katzmosestools9 ай бұрын
great video my friend. Love the apron!
@SpaltedStagStudio9 ай бұрын
Thank you very much for watching! Yeah, you can definitely tell the designer of the apron is a woodworker!
@ask_heyoka9 ай бұрын
He only works with the absolute best!
@Dustin-SHiTLUCK6910 ай бұрын
Great work yet again there buddy 🍻
@SpaltedStagStudio10 ай бұрын
Thank you!
@richardpogue495910 ай бұрын
Good video 👍
@SpaltedStagStudio10 ай бұрын
Thank you very much!
@Mustached_CrusaderАй бұрын
Had to do a double take when I saw your push stick. lol howdy neighbor!
@SpaltedStagStudioАй бұрын
Howdy! Kencraft is a great place. The whole family is so helpful. I learned allot from them.
@justinlortie90688 ай бұрын
you spent 18 mins showing us how you made this beauty but only 14 seconds showcasing it. you did great work. you should show it off a lil more =)
@SpaltedStagStudio8 ай бұрын
Thank you! We are still learning the whole video recording thing. I will definitely make sure I do a better job at showcasing the projects though!
@butterflywoodworks237410 ай бұрын
You don’t need clamps for the corner banding, blue tape works fine.
@SpaltedStagStudio10 ай бұрын
Yeah, it did seem to hold it just fine, I just have a hard time entrusting a project to a couple of pieces of painters tape.
@magcolor10 ай бұрын
👍👍👍👍👍
@theacousticpoet10 ай бұрын
Beautiful work! Just wanted to give you a heads up on something. In my research for making similar boxes, I've found a lot of information that says that cedar has a tendency to affect the taste/smell of cannabis. People have been using mahogany as a substitute for cedar.
@SpaltedStagStudio10 ай бұрын
Thanks for the heads up! I will definitely be looking into that. Any idea what species of mahagony?
@theacousticpoet10 ай бұрын
No Problem! I haven't found any specifics on the species of mahogany. @@SpaltedStagStudio
@DsHardWoodCreations10 ай бұрын
@@SpaltedStagStudioperuvian or honduran
@Now_Roger_That10 ай бұрын
I've read the same about Spanish Cedar...Another alternative I've read about would be Sapele...
@josephanthony28656 ай бұрын
Whoa! This is great craftsmanship. Do you make these boxes for customers or is it just for personal use? Impressive!
@SpaltedStagStudio6 ай бұрын
Thank you kindly! I normally make them for customers. I just did this one for the video, though. I really enjoy working one on one with clients to create custom pieces.
@josephanthony28656 ай бұрын
@@SpaltedStagStudio Cool! Where can I find your info to contact you? I’d like to get more info and see about getting one of these beauts on order.
@SpaltedStagStudio6 ай бұрын
I have a website with the same name as my channel or you can just email me justin@spaltedstagstudio.com
@DudiLucantis10 ай бұрын
Muy lindo trabajo. En la tapa le pusiste un medidor de humedad y ¡que es la otra cosa? Abrazos desde Argentina!
@SpaltedStagStudio10 ай бұрын
Lo siento, esto es a través de una aplicación de traducción. Es un humidificador. ¡Qué locura ver este vídeo visto desde tan lejos! ¡Gracias por ver!
@DudiLucantis10 ай бұрын
jajaja You can speak in English, in South America, we get used to speak in another language. But i like speak en castellano. Éxitos hermano!
@madbaroncalls10 ай бұрын
Nice box, where did you get the humidor kit?
@SpaltedStagStudio10 ай бұрын
Thank you! I found them on Amazon.
@jassibrar84184 ай бұрын
What a beautiful humidor!! Does anyone know the name of the bit he's using to notch the wood for the hinges??
@SpaltedStagStudio4 ай бұрын
I'm mostly doing it with a router plane. Super simple tool, but very accurate!
@hcamardelle20 күн бұрын
Probably a dumb question but do you have a link for the marker you used? I LIKE that! Great video. I think I want to make a couple of these and a previous poster is correct...show the end product more. Good job on the humidor and the video. Keep it up!
@SpaltedStagStudio20 күн бұрын
It's been a bit since I made the video, Im guessing you're talking about the what mark I used to mark on the walnut? If so that's actually a Pica Pencil. You can get a couple colors for it, including white. I'm definitely getting better at showing off the product or at least trying to. Thank you for watching!
@hcamardelle20 күн бұрын
@@SpaltedStagStudio Thanks!!
@fredpierce609710 ай бұрын
My Bestie takeaway was 17 coats of lacquer….. I tend to be a bit stingy and self rushed on finishing but I’m going to smarten up.
@SpaltedStagStudio10 ай бұрын
It took me more than a few ruined finishes to do so myself haha. I'm a very impatient person, so it's a work in progress.
@fredpierce609710 ай бұрын
@@SpaltedStagStudio the voice of experience must be listened to…..
@jameslockwood51139 ай бұрын
explain to me the saw blade you used during the period of cutting dados and miters. Silver blade with very large gullets. Explain why you like that blade please.
@SpaltedStagStudio8 ай бұрын
It's a 24 flat tooth freud. I also have a CMT from Katz-Moses that works just as well. Generally low tooth count with large gullet is for ripping. It gives the saw dust plenty of room to be ejected. In this particular case, I use it for its flat teeth. Allot of blades have alternating points, which leave an uneven dado/rabbit. Flat teeth give you a much smoother finish. These two blades are very high quality. They last a long time and have thicker carbide teeth so when they do dull you can have them sharpened.
@themessenger23566 ай бұрын
So you can make a humidor box out of any wood as long as it’s lined with cedar?
@SpaltedStagStudio6 ай бұрын
Thats my opinion, yes. I' have made a few of these, and all of them have held the moisture content very well so far.
@danielhamilton426910 ай бұрын
Great-the only problem is your smoke box looks like a chest X-ray.
@SpaltedStagStudio10 ай бұрын
Hahaha. I didn't see that! I feel like bookmatches are like ink blot tests. It's interesting to hear what people see in them.
@dennislaskowski37736 ай бұрын
What were the two things on the inside of the lid?
@SpaltedStagStudio6 ай бұрын
The guage Hygrometer and the other piece is a humidifier. You can just add a couple of drop of water to it and increase the humidity a bit.
@nidalawad12506 ай бұрын
Great and beautiful, where can I buy Spanish cedar?
@SpaltedStagStudio6 ай бұрын
I get mine from a local hardwood dealer. I'd assume most would carry it. Thankfully, it's pretty light, and you don't need much of it, so if needed, I'm sure you can find it online.
@nidalawad12506 ай бұрын
@SpaltedStagStudio thanks, i am in UAE, and I tried Amazon, only thin lists and small pieces available.
@SpaltedStagStudio6 ай бұрын
I wish I could be more help, unfortunately I'm not familiar with other areas. I feel like ordering online is going to be very expensive. I'm privileged enough that most things are readily available at dealers near me.
@nidalawad12506 ай бұрын
@SpaltedStagStudio Thank you, dear Sir, and Merry Christmas to you. I have a lot of friends in the USA and Canada who can buy for me, if you have any adeess or contact that I can use, it will be greatly appreciated.
@SpaltedStagStudio6 ай бұрын
Merry Christmas to you as well! Sorry for the late reply. I personally use a place called Kencraft in Toledo, Ohio. I think your best bet would get ahold of your friends and have them check their local hardwood dealers. It's a fairly common species, so I would think most are gonna carry it or at least be able to order it for you.
@rjcorrea66405 күн бұрын
Do you sell this at all?
@SpaltedStagStudio3 күн бұрын
I do! This particular piece was donated, but I do make custom pieces.
@rjcorrea66403 күн бұрын
@@SpaltedStagStudio awesome, do you have like a site i can use to order?
@SpaltedStagStudioКүн бұрын
They will all be custom-made. If you google Spalted Stag Studio, my website should pop up, and you can email me.
@JorgeDelgado-ip9dc5 ай бұрын
Can I buy ?
@SpaltedStagStudio5 ай бұрын
You can visit my site and shoot me a message. We can definitely discuss it!