Tips for the scroll saw: replace the bouncy insert with something rigid, increase the speed, and check out all the different blade choices there are. Scroll saws are cool because with the right blades, you can cut holes in things with no exit. Just take the blade off, run it through a pre-drilled hole, and re-attach the blade.

I have fish request for a bait... A baby Mahi Mahi...The paint job would be amazing!

So I’m watching these videos out of order and seeing you zoom in on Chips eye while the music lyrics were saying “im goin home” brought me to tears. Mans best friend buddy, RIP Chip

I love it when you can hear Chip hammering water in the background 😂

Scroll saws have a learning curve. Learning blade speed and blade type for the type/grain wood you are using. I used a scroll to make my baits 20-30 years ago. Don't give up on the saw, but perhaps replace the cut ring with a metal one. Your baits rock Brother!!!!!

I love how often he can post with such quality baits

❤️‍🩹 Long live Chip, best wishes to you and the fam Nate. Keep up the amazing, educational, informative and inspiring work. We all love it.

Chip’s a comedic genius

Your debate to cut down the bulbous tail from square to rounded gave me an idea to challenge your skills: Carve a bait that you could make a mold, carve and modify it to make another mold and then once more. Like 3 soft plastics from one chunk of wood.

I'd have been here sooner but I was watching mythbusters. Thanks for filming stuff for us, much appreciated.

The shear content of this channel is literally my favorite thing to watch on any platform ever. . . It’s good stuff. On to the next bait!

Ryan Hall is my go-to live weather channel. Severe weather is fascinating as long as it stays away from home. If I hadn't started making baits I may have gotten into storm chasing. This bait has a forehead that looks quite carpy.

Thanks for making such quality content. You’ve inspired me to start making lures.

9:17 Chip just casually gulping water in the background😂

Love watching your vids every couple weeks!

Bro you're a master on the bandsaw. Dont lose your edge

Love your vids and sense of humour dude.... Commenting this before this vid just cauee i know you put out bangers😆💪

I caught my first common carp a couple weeks ago on just a small curly tail worm and really light line and I couldn’t stop laughing about it for a while!😂 I love your videos so much! Thanks for re-inspiring me to go out fishing again and to try soft plastics! I wouldn’t have had that great experience without it!

You are the guy that keeps me making bucktail lures,everything is an option

You should make a tiger fish lure, that would be some spiffy fun facts and a cool lure

It's official. These videos are awesome 🤘

Hey love ur vids watched them for a while keep up with all the good work

FYI, walleye have no length limit on inland waters, 15 inch minimum only applies to mississippi river pools and a few specific lakes. I still would have thrown him back because it's a bit small (which may be why you mentioned it), but just thought it was worth pointing out.

I was wait for this one. I kept lookin every hour to see when this got up😂

Eventhough my baitmaking have been at a stop for a year because I need a new airbrush compressor and I've got a pike fly setup last year I will never not stop watching your videos 😊

i own both a scrollsaw and bandsaw, the key with scrollsaws in to never use blanks where your fingers are cramped or bunched up to hold onto it.. the piece will just rock on the table due to not enough surface area.. As soon as you use larger blanks the rocking will reduce considerably to where its a minor inconvenience sometimes.. And also put the pressure plate/safety guard down on the piece until its dragging across it with some friction.. the beauty of the scrollsaw is being able to make intricate cuts without always having to back out the blade and cut in again.. you can do something like your baits in pretty much one constant movement.. Also yeah your plastic deck plate is garbage, copy it and make one out of something like a hardwood or birch ply..

never fails to make quality content cant wait to see whats next

That buffalo looked like a ton of fun to catch. Massive and had great fight in him for a good while.

Right on!! Congrats man!!

Nice for you to be back

Bandsaw was the best thing I ever bought. For lure making

All in on extreme weather and lure making!

I don't think you even realize it,best lure maker,and given us good stuff always

I would love to see you make a koi fish lure.

I feel for the guy who sent you that scrollsaw. Brilliant video as ever

Scroll saws work best on thin material

Preciate you owning it. Not every bait can be the bees knees

I'm hooked on the channel. It's only a matter of time that I get that master class...

I want to try and build a bait again because of this man

That buffalo was amazing. Nice catch! Also even though your bait didn't work to catch fish, it looked great. 😂

The most graceful release for a pb buffalo ive ever seen.

absoloutely scrumptious looking bait

I only use my scroll saw for lips and props. Works great for tight turns on lexan. Wood, not so much

Nice bonus fishing, well done.

Have you ever made a Rattle snake "rattle" crank bait? You are a positive influence to the world of bait makers,! Fish on! dude!!

Hey love the vids keep up the good work

Nice catch!

I like the semi sunk in jig head always cool ideas coming out of this channel as usual please make a corky

Getting into one day season!

Banging video love the look of the lure sweet ❤

The scroll saw is a motorised version of the hand held one you use for lips'n stuff. Make a rigid blade inlay for the table, and use mainly for thin materials. You can hammer nails with a sewing machine..

Thats one sexy shad dude. Hve literally been on the edge of my seat waiting for your next vid!🤣😂

Ryan Hall y'all is the second weather dude I watch, along with Oppenheimer ranch.

Nate, I've watched the Grinch episode numerous times and still love it! Maybe you could try a Fred Flintstone just for me? Coop

you could try placing the cans upside down so that air doesnt get in and dry out the contents. i do that with paints etc and its been working so far

Holy crap! That's a big ol carp.

Scroll saws work better on thinner pieces of wood and with different blades, really good for curves. High speed on the saw, slower push with your hands. Let the tool do the work. Wander less than a bandsaw too. Definitely a learning curve.

Use a finer blade for the scrollsaw , put a ply bed over the existing floppy one

Wow! That's DIFFERENT 🤯

@marlingbaits I had the same issue when I tried one. They are meant for this wood and artsy type projects

Was the scroll saw mounted to the table? I like mine for some stuff, but wouldn't abandon your bandsaw!

Always a joy watching you make baits. Could you make a Vampire Bat for Halloween and do fun facts about them? Thanks

I have used a scroll saw to cut a couple hundred lures, but have had opportunity to used a band saw on only a couple. Hands down!, the band sand is the much quicker and easier tool to use. Scroll saws are great for thin material when you need to cut precise detail, but not so much with 3/4 and 1 inch stock. I feel your pain!

The scroll saw can be a great addition. It’s like a hammer and a driver each tool has their uses.

I have a band saw and scroll saw. To be honest, both are great to have, but neither are perfect for every job. I like scroll saw for certain things, but thickness of material really determines how it goes

I want a "that was the chair, I didn't fart" tee shirt 😂

I think you need those really thin wire looking type blades for that so you can turn easily as you're cutting.

Silly question here... is that blade upside down on the scroll saw? Shouldn't the blade pull the wood into the surface of the work surface and not away from it? Every scroll saw I've used had the teeth pulling down. But he's a master with the bandsaw so stick with it.

I actually liked the one with the chartreuse body line...I feel like that would work well here in TX

Heck yeah I watch weather events even when they aren’t nearby. It’s exciting seeing storm chasers intercept tornados. I find weather just fascinating in general. Sounds like you watch Ryan Hall Y’all.

I asspire to make baits like you.

i know you make baits but what if one day you made a rod and a bait and tried to catch a fish on both? it would be pretty cool to see you make and paint a rod!

I know nothing about tools, including scroll saws. But that doesn't look right 😂

Super generous guy. but yeah, I prefer my bandsaw over a scrollsaw too. I wonder if the blade would have made a difference. I find companies don't send their products with good blades generally, even on my bandsaw. Cut like butter once I replaced the one that came with it.

Bob Saggett 😂😂😂😂 I felt that one.

The scroll saw can be handy, but for sure I’d prefer the band saw. I have found that if it’s grabbing and kicking the work up, I flip the blade over so it’s grabbing and pulling the work towards the table. No clue if that’s the right way to use it, but it seems to help. 😂

That's the first carp of any species that I've seen caught o artificial bait. Very cool.

Yup! Follow Reed Timmer and Vincent's streams whenever there is a chase going on

Some more tips for the scroll saw you should hold the wood with a firm grip against the table so it doesn’t flop around and you should buy some good quality blades and it may take a bit to break them in too.

Am I the only one that says “One Day!!” Like Nate in causal conversation and get sad when people do not know what it is from? 😅

I watch the weather events frequently but i work for a tree service that occasionally goes to other parts of the country to aid in clearing power lines to restore power

Have you ever seen a frankenspitz lure? Might be an interesting lure to try and put your own spin on the design.

The scrollsaw I have is a old one and the plate is made all out of metal and I made a lot of fish lures with it and it does take time to get used to it

Bro! You gotta start hitting us with an ON To The TEST TANK! When it comes to the test tank.😂

Trying to work out why I like the cut of this guys jib. Then worked out that we’re the same age nearly to the day.

Yep, have Ryan, Andy and crew on when the naders come to dinner.

That lure has goats balls 😂😂😂😂

for the scroll saw, try replacing that middle bit with brass or copper.

22:14 😂 How cute Chip.

Ahh the sound of a German shepherd drinking and I can vision the water trail lol😂

How bad did it suck coming back from Florida? I came back from Jamaica to find we were having second winter in Maine. I hope you get the chance to get away again soon and catch something awesome!

I have an idea you should try with your wood lures. if you use a crumpled piece of brown paper bag and rub it on the white basecoat like using sand paper it smooths out the paint for the next layers and it will give you a nicer clearcoat.

My man is throwing shade today lol 😂 05:50

Ryan Hall is my weatherman too!

I watch Ryan hall alot, just enjoy the weather, I'll turn it on for like 10 minutes and realize 3 hours has gone by lol

"Still really jumpy and weird" me too bro. Me too

Nate: I feel for ya.' buddy! I own 4 band saws and a 30 year old Craftsman scroll saw. The scroll saw hasn't been used 3 times in 30 years, for the exact same reason you don't care for that one! It vibrates and chatters all over the place and I'm always afraid I'll lose a finger using it? I've seen some seriously delicate craft work done on them, but that's not me I guess? I don't make baits (or I haven't in years), but I still love watching YOU do it. You're a master. I've been a Subscriber your a few years now. Always look forward to seeing what you'll make next?? :~)))) God bless: Dave

I would suggest making you a metal plate to replace the plastic circle. I don't know much about those saws so I have no clue how they are suppose to act.

I think this bait looks awesome! 👌 Hopefully, it's just a location thing. Looks like it could put in some work!

my ban saw had the same problems .... i cut a piece of wood and screwed it to the top of the platform to make it more rigid and put my holder down further than it needed to be to make it hold tighter and most of my problems went away !!!!!!