BULLETPROOFING A CP4 FUEL PUMP?!

Рет қаралды 83,831

3 жыл бұрын

CP4 Pump? This High Pressure Fuel Pump is found in your 2011-2014 Ford Powerstroke and 2011-2016 LML Duramax. These pump have been known to fail for a number of facts and assumptions. One fact as we discuss on the channel is our customer truck died, would not start and was towed to the shop. After pulling the Fass Filters and finding metal in the filters we went to the VCV on top of the CP4 pump. As shown metal was minimum "this pump had not yet failed." But one problem existed metal was in the entire low and high pressure fuel system. Watch to see our approach towards this issue and our solution to this problem.
For more information please email👇
Sales@pointblankperformance.com

Пікірлер: 244

@wheresbrent 2 жыл бұрын

Yessir I'd love to see a cp 4.2 and cp4 teardown and comparison!

@marksr1907 Жыл бұрын

For those of us with oversized tanks that low point mount for the low pressure tank pickup is no bueno.

@soggybottomfarm2575 2 жыл бұрын

Love the video and clean install but all this sure makes the 7.3 zilla look more appealing

@danielcalle6822 3 жыл бұрын

Very informative video. Thanks for educating

@walterk1221 2 жыл бұрын

That was the most beautiful low pressure fuel system install ever! Most that I have seen are hacks that look like "get a grip garage" did them.

@kenbailey3499 3 жыл бұрын

That is a clean install, one the best I have seen.

@bradsmith5838 Жыл бұрын

Can the air dog system be used instead of the fass? Thanks, love the powerstroke videos (6.4L owner with over 200k no engine problems just rebuilt the rear axle due to catastrophic failure, 09 elt ex cab manual shift cab chassis

@Elektricbrn 3 жыл бұрын

Like others have said, that is a super clean install. I was curious though, with the sump are you able to reinstall the tank shield? Also, do you have a model number for the FASS you would recommend and for those CNC clamps that you used? Great video.

@dansdiesel3576 3 жыл бұрын

Airdog has a great location first off and they have a water port to drain. MAINTENANCE IS KEY

@machinegundrone1518 3 жыл бұрын

Great video and info. Couple of ?'s were all 15's equipped with the 4.2 upgrade? And what are your thoughts on the H&S Motorsports 121003 Fuel Filter Conversion Kits for these trucks? Thanks again I am subscribing.

@rcjunkies816 2 жыл бұрын

Great video and very detailed on how the system works so I have 2015 Chevy duramax lml that Unfortunately I was hit hard when my cp4 went out do u think I should go with a cp3 or go back with cp4 i purchased a fass lift pump which gives u more horsepower cp3 -cp4

@dv7431 2 жыл бұрын

Nice install

@SHOWTIME070 Жыл бұрын

So i just bought a 2011 f250 6.7 . An ive heard of metal getting to the engine thro the fuel system siezing it up. So whats my best option so i have no worries????

@tbl8560 Жыл бұрын

Did I miss the install of the Exergy Fuel Saver Pressure Regulator with 25micron screen to eliminate metal going downstream taking out injectors?

@Sam1986E 3 жыл бұрын

I have a new diesel Jeep wrangler Rubicon. It has the CP4.2 in it

@davelosonczy1537 3 жыл бұрын

Ty👍👍

@Eaveszx14 3 жыл бұрын

My greatest concern on this install is traveling through brushy woods or highway debris flying up and cutting or snagging the fuel line that is exposed on the belly of the tank. Great video tho.

@edwardrock1666 3 жыл бұрын

Good video

@jaronvaughn6134 3 жыл бұрын

Get a CP4 Disaster Prevention Kit and install it on your CP4 and you won’t have to worry about injectors, rails etc when your CP4 bottom end comes apart. If you have a FASS set up, put a 2 micron filter on and forget about it, no worries