How to Reseal Your CAV Injection Pump Part1 (From an International Harvester B414)

Рет қаралды 3,458

Ай бұрын

This video is part 1 of stripping a CAV injection pump to reseal it.
Hello, I'm Lance (aka Bundy Bear), and doing these videos is my hobby. I do own Queensland Tractor Spares in Australia where I sell parts and offer technical advice to customers.
Parts seen in our videos can be purchased from www.queenslandtractorspares.co...
We have a lot more than we can offer on our website available to us and in our store. If you don't see what you would like please email info@queenslandtractorspares.com.au or call 1300 850 097 and we will help where we can.
I do try and help with technical advice at bundybearsshed@gmail.com if you have a question or are having trouble with your project.
The CAV manual is in the technical section of the Queensland Tractor Spares website above.
#bundybearsshed, #tractorrestoration, #tractorrepair, #tractorvideos #crcindustriesau #sparex

Пікірлер: 23

@hansrose7404 14 күн бұрын

Lance, 5 years ago I followed you resealing another CAV and was able to get my JD 5300 back in service. My issue was the pump head had seized and sheared off the rotor. It took me a while to find a new pump head, but was then able to get it back together and working ..It runs great and I wanted to send my thanks! Regards from Pennsylvania!

@peterjubb5395

What a talented mechanic ( technician) you are Lance. I completely dismantled the CAV. DPA Injection pump on my old MF 30 (French horror horror) Tractor and rebuilt it with a kit from Queensland Tractor Spares. I followed the instructions from your MF video No. 14 & 15. I found it so easy to do although I did at times have a few nervous moments. In particular when the governor weighs fell out of the basket. I did think “What a bastard.” But I got them back, bleed the system and away it went. I must admit I was relieved when fired up. Thanks to your instruction I saved myself a lot of money.

@charleshart6992

Excellent video Lance - you always make understanding the process relatively easy!

@manfromthemist1958

G Day Lance, just the job, just getting home from Aberdeen after visitng Marshall for a week and needed something to chill down to, traffic was crap and I see you've got a new video out, bottle of wine and Lance nothing could be better.

@kentseymour2084

It's been 50 years since I have taken an injector pump apart. Loaned a friend my book on doing this and never got it back.

@markwright6230

Very informative video Great job Lance.. Thankyou for making your videos very easy and understandable for the lay person....

@pm270100

good vid well done but i got an old TEF ////PS how hard is hard as 🤔🤔🤔🤔😁

@jefftheaussie2225

Lance, We have a Massey 1105 with the turbo 354. The pump has a pulsation damper on the front of it which is letting fuel out of the equalisation hole in the front of the damper and making a big mess. From my internet research it appears there are two different ones depending on the pump serial number. I will get that number later. Does QLD Tractor spares have these dampers and is there anything I should know about replacing it? Thanking you, Jeff.