Toyota 1.8L PCV Valve Location - Positive Crankcase Ventilation - Corolla - Matrix -MR2

Toyota 1.8L PCV Valve Location - Positive Crankcase Ventilation - Corolla - Matrix -MR2 - 2ZR-FE

Рет қаралды 111,717

8 жыл бұрын

DIY PCV valve & location Toyota with a 1.8L engine. Not hard at all to change the PCV (Positive Crankcase Ventilation) Valve. You will need a 10mm socket and wrench and a 19mm opened ended wrench.
Typically these get stick and you will burn oil or see smoke come out.
DIY Spark Plugs 1.8L Toyota Engine:
• Corolla 98 - 08 Toyota...
Vehicles that have this engine:
2003 Pontiac Vibe
2004 Pontiac Vibe
2005 Pontiac Vibe
2006 Pontiac Vibe
2007 Pontiac Vibe
2008 Pontiac Vibe
2000 Toyota Celica
2001 Toyota Celica
2002 Toyota Celica
2003 Toyota Celica
2004 Toyota Celica
2005 Toyota Celica
1998 Toyota Corolla
1999 Toyota Corolla
2000 Toyota Corolla
2001 Toyota Corolla
2002 Toyota Corolla
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla
2003 Toyota Matrix
2004 Toyota Matrix
2005 Toyota Matrix
2006 Toyota Matrix
2007 Toyota Matrix
2008 Toyota Matrix
2000 Toyota MR2 Spyder
2001 Toyota MR2 Spyder
2002 Toyota MR2 Spyder
2003 Toyota MR2 Spyder
2004 Toyota MR2 Spyder
Matrix and Vibe PCV (Positive Crankcase Valve) Replacement on a 1.8L 1ZZ-FE engine. Their are slightly different PCV valve part numbers depending on the make and model of vehicle. Commonly overlooked part that has a big impact in overall engine and emissions sustainability. Service manual suggest inspecting the PCV valve on this series engine every 30k miles Link to additional details on Pontiac Vibe PCV replacement: forums.genvibe.com/phpBB3/view...
If the hose is cracked or loose fitting, on the 2003-2008 Vibe/Matrix the replacement hose part number is W0133-1746428, this appears to be universal between the FWD and AWD models.
Questions, Comments, Concerns:
bundysgarage@gmail.com
Twitter:
goo.gl/n4Yjw8
@bundysgarage
On The Web:
www.bundysgarage.com
Music by Randall Kent: As seen on NCIS
• Randall Kent - Going H...
All Rights Reserved 2016
© Copyright 2016
Bundys Garage
All rights reserved. This material may not be published, broadcast, rewritten or redistributed in whole or part with out the express written permission. Contact: bundysgarage@gmail.com
DISCLAIMER - DISCLAIMER - DISCLAIMER
Due to factors beyond the control of BundysGarage, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. BundysGarage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. BundysGarage recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of BundysGarage, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the end user and not BundysGarage nor any of it’s subsidiaries.

Пікірлер: 104

@Wrenchingdaily 5 жыл бұрын

Why use the large profile adjustable wrench if you have the correct 19mm open end wrench? You wouldn’t need to remove that plastic rail to make room if you used the correct tool

@alinturcoman5284 Жыл бұрын

sure, i just used a deep 19mm socket

@gennaro4941 Жыл бұрын

Thank you for the video. Cheap enough part that EVERYONE should change

@MYUTUBE0808 6 жыл бұрын

Great advise, thank you saved a lot of money and time!

@ricardoquezada7133 4 жыл бұрын

Thanks for being so informative.

@bundysgarage 4 жыл бұрын

My pleasure!

@showgirlsaroundtheworldada4484 4 жыл бұрын

Great vlog!

@stevejette2329 3 жыл бұрын

Harbor Freight sells a set of three pliers, $9, with ends to fit three different size hoses. I thought it was silly but glad I bought them.

@EKAutoTech 8 жыл бұрын

great video. i just replaced the same thing on a matrix. I used a deep well socket and ratchet to remove the valve.

@bundysgarage 8 жыл бұрын

+EK Auto Tech 19mm socket baby! You didn't have to move that plastic rail, did you?

@EKAutoTech 8 жыл бұрын

no i didnt.

@cwmoriarty 7 жыл бұрын

It's 22mm on a 2.4L Matrix (2009 XRS), FYI. I had to use a deep socket and put anti-seize paste on the new valve.

@JoseGonzalez-jo7cc 11 ай бұрын

Gracias muy bien explicado bue dia Jose

@raider762 5 жыл бұрын

O gee. So easy. I will probably replace a lot of these at work for some easy money.

@michelod.i.y.5202 5 жыл бұрын

I found this video useful, I think I'll try it with a 19mm deep socket.

@bundysgarage 5 жыл бұрын

It’s not hard to do at all. You can do it!

@michelod.i.y.5202 5 жыл бұрын

@@bundysgarage thanks I have a 2001 Toyota Celica vvtli. I think in the US you call it a GTS. 👍

@tigergray1100 5 жыл бұрын

It's 22mm not 19mm

@superkari28 4 жыл бұрын

i agree

@ricodeguzman5338 5 жыл бұрын

for 2010 corollas, can you find it in the same location? thank you.

@Janith1980 Жыл бұрын

What is the other hose that comes out from the left of the video out from the top of the crank case (rocker cover) and what is the use of it as opposed to the PCV valve hose. Thanks

@Foshogi 3 ай бұрын

are we all just going to ignore the vacuum hose splitting when the hose went back on the pcv lmao

@victorjasso2930 8 ай бұрын

Hi great video on pcv valve. Any idea where vehicle speed sensor located on 2003 toyota matrix xr 1.8l automatic? Where I thought located bottom back of engine by transaxle not there. There is a little cover there but no wires connected. Any information appreciated. Thank you.

@keithrice6649 2 жыл бұрын

Hey I have a Toyota Corolla and I accidentally didn't put oil in the motor but I did put oil in it a day later and my motor started ticking the car runs when I put it in driver shuts off what do I got to do to fix that problem

@mostrols 5 жыл бұрын

Ca you show me the location of knock sensor of toyota celica 1.8, 2009

@sunlite9759 5 жыл бұрын

Why didn't you use a box wrench on the PCV valve? You showed one? With a box or socket wrench no need to remove harness wiring!!! Just another step that may break the plastic. No tape on the threads?

@stevejette2329 3 жыл бұрын

Sun - Mine came from the dealer with thread tape.

@rubenroque347 8 ай бұрын

Very informative - FYI: 3/4 SAE will also work on a 19MM Metric

@johnathanware8023 8 ай бұрын

You mean 3/4th SAE

@modisezikode8699 5 жыл бұрын

What was the mileage at the time of replacement.

@DonaldAmico-cz7bk 3 ай бұрын

When would it be easier to remove the bolt with just a deep socket 19 mm?

@TheNewma225 7 жыл бұрын

Novice question: The coil pack wiring has a plastic hose-like case around it. I managed to crack the hose slightly. Am I OK to just cover it with some electrical tape? Should I test the coil packs to make sure the wires are OK? My engine is idling a little rough. I doubt this is the culprit (think it's the PCV hose) but should I eliminate the possibility with a check?

@bundysgarage 7 жыл бұрын

+Caitlin Newman if there was a misfire from a damaged wire then your check engine light would be on. A cracked plastic wiring loom would not effect performance.

@TheNewma225 7 жыл бұрын

BundysGarage thank you! nice to rule that out.

@signsofdivinity1310 5 жыл бұрын

please I need help!!! My pcv valve i got it replaced found it on a junkyard but it has a leak but not on the side you are showing in the video...on the other extension of the valve ... Is black tape an option???

@bundysgarage 5 жыл бұрын

No tape will not hold it. Go to Rockauto.com you can find a new one there for super cheap.

@gasolinaquema8416 5 жыл бұрын

I need help! I can not remove the hose from the PVC valve. Any ideas on how I can remove it? It moves around the valve but won’t come off

@bundysgarage 5 жыл бұрын

Pull on the hose real hard or cut the hose with a razor blade length wise.

@candacepales4282 7 жыл бұрын

What is the part number number of the push pins?

@zackman815 5 жыл бұрын

Your hose split a little when you put it back on. Mine did the same thing. Do we need to replace the hose?

@stevejette2329 3 жыл бұрын

Just cut off about a half inch.

@billsmith1486 5 жыл бұрын

You do not use an adjustable wrench very often, do you?

@bundysgarage 5 жыл бұрын

Why do you say that?

@robertnordeen4631 2 жыл бұрын

How do you know when that goes out? Is it replaced on a regular maintenance? Can't you just spray it with carb cleaner in a pinch? Will it show a OBD2 code? Do I have it in a 2012 Toyota Corolla Sport 1.8l?

@bundysgarage 2 жыл бұрын

Yes it’s in a Toyota 1.8L It will not show an OBD2 code You can spray it with carb cleaner in a pinch It’s a regular maintenance item Change it every 50,000 to 60,000 miles.

@robertnordeen4631 2 жыл бұрын

It's probably time to change it. It might even be original. I bought it with 154k mi. Just broke in.

@robertnordeen4631 2 жыл бұрын

I thought this was going to be an easy fix with a pliers and a mm wrench. Wrong. It's all backwards and upsidedown. That thing is behind the manifold. Dumb place for that. They are for the garage not the people's car.

@kgb0070 6 жыл бұрын

Dude, did not you put a seal on the pcv thread?

@bundysgarage 6 жыл бұрын

You don’t need to.

@nihonkokusai 4 жыл бұрын

The spring will get weaker in time so 120k mls is a good mileage to replace or every 10 years.

@Mikah-pd1jd 5 жыл бұрын

I have this same exact car ... replaced the pcv valve following instruction from this video ... everything went well other than car won't start now with new valve ... I did notice some thread is out on the new one ... old valve seated on to an exact ... could this be why my car won't start ?

@bundysgarage 5 жыл бұрын

Really? The car should start even with the PCV not installed. Did you remove anything else?

@Mikah-pd1jd 5 жыл бұрын

I also replaced the coolant temperature sensor cuz I got a P0128 code ... everything went well with that ... but yeah, that's about it.

@wasihunterefe4108 2 жыл бұрын

how mach Lter oil

@mrg5853 6 жыл бұрын

How can i find out which engine i have? 2005 corolla S model

@bundysgarage 6 жыл бұрын

Your car has a 1.8L engine. If you ever need to see the specs for your car or any car for that matter, go to decodethis.com and enter the VIN

@mrg5853 6 жыл бұрын

BundysGarage thank you!

@DougHinVA 2 жыл бұрын

A new PCV is cheap and cleaning the old one may SEEM to work well and still be not working well. Just put in a new one and pay the small charge... maybe $7-12 max.

@enriqueatala2567 2 жыл бұрын

Hola, tengo toyota Corolla 2008. con 235 mil kmts, el auto falla y los sintomas son estos: arranca y conforme se va calentando las rpm suben a casi 2000 rpm. Luego al andar en calle o carretera si lo dejas en punto muerto las rpm suben y bajan de 2000 y bajan a 1000, hasta que en un momento si paro el carro quedan en 2000 rpm. hice una prueba, saqué la goma del filtro de aire, así tenía acceso al cuerpo de aceleración, puse en marcha y poco a poco tapé la entrada de aire que entra a la válvula IAC, hasta quedar completamente tapada , entonces el motor se detiene, eso me dice que no hay entradas de aire adicionales. Otra prueba, en frio y con contacto puesto, medí al conector hembra que le enchufa a la IAC, puse negativo tester directo a bateria y me dio 12 volts con el cable negro y azul y luego medí al cable de tierra (negro) y no dio nada de voltaje y despues al otro cable, que creo es señal y midió 0.14 volts, también le cuento que desconecte el conector del IAC, el carro anda y hace el mismo problema. Me preocupa mucho que pueda ser la ECU la que pueda estar enviando un voltaje inapropiado. Gracias por su ayuda

@f1346m 4 жыл бұрын

Can a bad Pcv cause a multiple misfire code??

@bundysgarage 4 жыл бұрын

When was the last time you changed it? I saw one go 175,000 miles that was never changed and the intake had carbon in it. Not really bad but maybe a little longer the car I might have started causing a misfire condition. What code(s) does the car have?

@dosbaggos5575 7 жыл бұрын

What is that loop hose to the right?

@bundysgarage 7 жыл бұрын

+Rick Davidson it's a vacuum line

@dosbaggos5575 7 жыл бұрын

BundysGarage used car i bought and they stuck a not snug gas hose on it. Had problems i'ding it.thx.

@jonsmith919 6 жыл бұрын

Nice video, you should spray it with pb blaster if threads are seized

@bundysgarage 6 жыл бұрын

PB Blaster sucks! If you need a good penetrating oil mix 50/50 of Acetone and Automatic Transmission Fluid. Works wonders!

@stevejette2329 3 жыл бұрын

You said a 19mm wrench fits just right ... then used a Crescent. Which did not fit well ... ??

@bundysgarage 3 жыл бұрын

Man everyone’s a critic...

@stevejette2329 3 жыл бұрын

@@bundysgarage 😂 Please don't take anything I say too seriously. I am a Celica guy. Just bought a 2001 and found out the engine is from a Corolla or matrix. I am trying to find casting numbers but no can do.

@DougHinVA 4 жыл бұрын

the PCV valve is easy to remove.... take it out and clean with spray PCV valve aerosol cleaner or even MAFS aerosol spray...CHEAP insurance to clean BOTH valves and be careful with the tiny MAFS attachment screws.

@stevejette2329 3 жыл бұрын

Doug - Yes ! They are tiny. The clean MAF sensor made a huge difference !

@toyoscio 6 жыл бұрын

Oops he meant the 1ZZ-FE

@toyoscio 6 жыл бұрын

You mean the 1ZZ-FE. 2ZR-FE PCV is under the intake manifold

@mrg5853 6 жыл бұрын

toyoscio whats the difference between 1zz and 2zr?

@toyoscio 6 жыл бұрын

Mr G. The 2ZR-FE has Dual VVTi for both intake and exhaust, plus it had/has Toyota's Valvematic system. Maybe this is why these engines don't require periodic valve adjustments:}

@jacintogonzalez7146 Жыл бұрын

You left out the part were the hose WILL crack unless replaced new .

@bigfootswatching9986 3 ай бұрын

Use only Oem parts!! Use a Socket wrench!!!

@tardeliesmagic 6 жыл бұрын

Invest in some tools mate it'll be worth it,bit more than a pony that's all.

@godfreygumuzah5806 Жыл бұрын

My Toyota fielder is having low idle

@Doctordeath131313 3 жыл бұрын

You may want to invest in hose pliers, instead of pulling and possible hose damage.

@stevejette2329 3 жыл бұрын

Doctor - YES ! Harbor freight hose pliers work great. Three sizes for $9.

@p1n3apple21 6 жыл бұрын

so its not a 2zrfe

@toyoscio 6 жыл бұрын

Lol, nope he probably means 1ZZ-FE

@jacquelineperry5873 5 жыл бұрын

Dealership claim to have removed my motor to replace a seal leak.all was wrong was a bad pcv valve and a split in pcv hose.didnt remove motor or they would have saw hose.lowered transmission to replace seal.told me didn’t see bad pcv hose cause of black cover on it.took my money for removing a motor.

@-MrRichBiker1967 5 жыл бұрын

scumbags!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@tiukawni 5 жыл бұрын

thats A 1ZZ-FE TOYOTA NOT A 2ZR

@samhicks1670 5 жыл бұрын

how do you know this? I own corolla and don't know what mine is .

@macc240038 4 жыл бұрын

Old school. You remove the valve. You shake it to see if the valve is moving . You blow out the dirt. You spray degreaser in the valve. You blow it out again. Shake the valve. Is it moving freely ? Yes ? Put it back in. No need to buy a new one. Case closed.

@Doctordeath131313 3 жыл бұрын

I agree under normal circumstances, however, if one comes across a valve that is plugged end to end, I would just replace it .

@stevejette2329 3 жыл бұрын

macc - Mine was $7. Worth it for the peace of mind.

@metaframe2k 7 жыл бұрын

03:30 Work with the tools required more skills!

@bundysgarage 7 жыл бұрын

+Aobes what are you talking about dude

@-MrRichBiker1967 5 жыл бұрын

lmao...you said, what I was thinking..lol .you can tell a mechanic, when you see one. and they DO NOT where rolex watches while working on cars..lol

@-MrRichBiker1967 5 жыл бұрын

those, "pliers" are called channel locks...just for future reference! lol

@chocolate_squiggle 3 жыл бұрын

Man I thought I was pedantic sometimes. Besides, my dad taught me these were slip-joint pliers :-)

@stevejette2329 3 жыл бұрын

@@chocolate_squiggle Yup. Channelock is a brand.

@patswanepoel3447 2 жыл бұрын

gOOD VIDIO BUT WHERE DPOE THE OTHER END GO??????????

@DougHinVA 6 жыл бұрын

what he fails to explain is just how to get the CORRECT replacement when NAPA online list 4 and all 4 say 'may fit your car' ! No... I want the damn one with correct threads that is a match for my car.... not one that does not fit. It's a simple valve to replace and NAPA cannot narrow the one you need with the engine model and year and car model ?

@bundysgarage 6 жыл бұрын

Don’t shop at NAPA

@Fcubefilms 7 жыл бұрын

And this is for???

@bundysgarage 7 жыл бұрын

+fernando fierros shits and giggles

@Fcubefilms 7 жыл бұрын

BundysGarage &-

@bundysgarage 7 жыл бұрын

+fernando fierros are you really asking me what this is for?

@AZDESERT2024 5 жыл бұрын

I think he's asking - what were the symptoms that were fixed by replacing the PCV valve ? The old valve was moving freely and appeared functional. Was it necessary to replace , or were you just replacing as preventative maintenance because it was old ?