Butt welding the panel WITHOUT warping it

No video

Butt welding the panel WITHOUT warping it

Рет қаралды 187,949

Күн бұрын

The quarter panel fits but now we need to finish butt welding it. We’re going to show you exactly how to weld a large panel so that it doesn’t get warped from the heat. Then we’ll show you how to prep the metal for body work ✅
** Our 1956 Plymouth Savoy needs some TLC aka rust repair. This series of videos will show what to do when your classic car has rust issues. We're showing the step by step process of how to repair and replace a rusty quarter panel from scratch **
Rusty quarter panel repair - making one from scratch
Fabricating a Quarter Panel from Scratch - 1956 Plymouth
IF YOU ENJOYED WATCHING:
subscribe, leave a comment and hit the like button
/ badchad
CHECK OUT OUR MERCHANDISE HERE:
www.hiltzautoc...
FOLLOW US ON SOCIAL MEDIA:
/ badchadcustoms
/ badchadcustoms
/ macintyrejn
/ ___jolene
MAILING ADDRESS:
Hiltz Auto Co.
RR3
Canning, NS
B0P 1H0
#badchad #1956plymouth #metalfabrication #rustrepair #quarterpanelrepair #fabrication #sheetmetalrepair #restoration #carrestoration #quarterpanelreplacement

Пікірлер: 340

@jjdoyle2037 11 ай бұрын

I like the way he doesn't criticise previous work done. Respectful

@Labergemusic 11 ай бұрын

I've seriously enjoyed watching you make that panel from scratch. Seeing you use a regular welder and simple tools really shows how feasable this can be if you have the determination.

@brucewitcpalek5120 11 ай бұрын

I agree 💯 percent !!

@alanbolton9217 11 ай бұрын

And skill

@taylorj9920 11 ай бұрын

And time

@Labergemusic 11 ай бұрын

@@alanbolton9217 He built everything in front of you by hand. You can see everything he does, "skill" is what happens ONCE you've done what he did in all this series.

@alanbolton9217 11 ай бұрын

@Labergemusic don't know what your point is, mate? Chad certainly has the skill and ability, I am saying others may struggle. It's like playing music some people have it, and some wish they could have it.

@billstolz9587 11 ай бұрын

For everyone who wants a restoration pay attention this is what it takes

@richardsmith-qy6vl 11 ай бұрын

Great job Chad what I admire about you is you never get intimidated by a job and it's challenges you dive in and do your best and put 100% into it everytime thanks for the video.

@CSmith-oz4wp 11 ай бұрын

Patience is word of the day, as they say be quick but don’t be in a hurry. You Chad get so much done in the “live” videos you and Jolene do. Thank you for sharing your weekend with me.

@patrickscanlon1631 11 ай бұрын

Proof is in the pudding chad and you have proven a number of times your system works

@ianharvey5676 11 ай бұрын

Well done jolene this video was filmed and edited brilliantly.

@huevosrancheros11 11 ай бұрын

I have to give Jolene kudos for the excellent camerawork! Very professional, no shaking and precise shots between Chads ear and shoulder and other angles! Nice work too Chad and thanks for the tips and for finally providing some quality in the media that is available to us!

@davidklauer3422 11 ай бұрын

Ever time I think about turning you off Chad, I watch you, and gain more respect for your kind of work You’re old school, and you probably help more people realize that they can do anything if they put there mind to it Good work my friend

@franciscojuliangranadaescu3564 11 ай бұрын

I really like the yellow Fiat 124 Coue that can be seen un the background.

@brentbrown8393 11 ай бұрын

A wedding ring on Jolene would look fantastic, man she does a great Job. Thanks for the Sheetmetal education, I've learned a lot about Sheetmetal work from the both of you.👍

@tracyschmitz9192 11 ай бұрын

I hope Chad and Jolene read this. There is another youtuber named Steve Magnante that does a really good show about junkyard cars. he used to be on Motor Trend show Junkyard Gold, a really good show and now has his own youtube channel. He's a lot like you all in that he posts a new video every day. Well, he's been really sick in the hospital for several weeks with Encephalitis, a brain infection that is very serious. His youtube channel is his livelihood and it would be awesome if you all could maybe say something or maybe people who enjoy your videos would enjoy watching his. He's a helluva a good guy and anything anyone could do for him would be appreciated by many, many people.

@user-gb6re9eg3i 11 ай бұрын

ANOTHER LEARNING EXPERIENCE FOR US, CHAD! THANK YOU!

@rob1965ify 11 ай бұрын

Chad, thanks for showing welder settings, and type of disc used. It really helps in learning, to know a little of the tool tech. Also, fantastic camera work Jolene. Your filming is like we're standing right there. And you naturally know what to focus on. Thanks

@bryancostlow8508 11 ай бұрын

Excellent metal work Chad. Good work Doug & Excellent camera work Jolene. Thank you all for sharing your knowledge & expertise.

@TheSilverEagle 11 ай бұрын

Chad that Native American head on your shop should be inside and protected from the elements. It's too beautiful to let it rote in the sun , rain and snow.

@jimcoplan9502 11 ай бұрын

This is working out great. hand formed and placed. Chad and Doug got it right. Jolene is amazing with the camera work too.

@davidpark9727 11 ай бұрын

Picture perfect, just added another 50 years to a great old car !

@dral9657 11 ай бұрын

This along with creative thinking is why I LOVE THIS CHANNEL . I can be a harsh critic but I am hoping my sincerity wins the day .

@shawns57garage 11 ай бұрын

That Binford 6100 metal prep tool is awesome

@MrRasZee 11 ай бұрын

i guess a damp rag will cool if you aint got an air compressor . id have to give this a go . amazing how chads welding method does not warp 👍👌

@ShannonpdpHammond-yy7yh 5 ай бұрын

some people hide great knowledge keep it away from others, Chad here just expanded my know how.!!! thanks man!!

@jdxjim 11 ай бұрын

Man--I didn't think you were going to get that large panel straight and looking good--I was wrong---Looks Great !!!

@jerrymason6027 11 ай бұрын

Boyyy,it looks slick as hell after you put the grinder on the panel, I relly like the looks of it chad,,I think it’s gonna turn out pretty,,hi Jolene an fina,,,,😅, luv you guys, 👍👍😀

@genarogarcia1087 11 ай бұрын

Fantastic! "Back in the day" schools used to offer vocational classes such as bodywork, machining, woodworking etc. many of which are no longer being taught. Also don't let anyone tell you otherwise you are a godsend for the "right to repair movement" in a disposable world. I believe your daily tenacity in sharing your experience will bring you many blessings. Thank you Chad and Jolene.

@chrisnoeske8904 11 ай бұрын

I love watching the master of his trade. Simply amazing

@oliverw3646 11 ай бұрын

Serious talent! Spectacular work!

@garypenne8114 11 ай бұрын

Very impressed with making a quarter panel from scratch. Really turning out nice.

@davehunt4031 11 ай бұрын

Thanks for teaching me Chad.

@henryallisonsr8318 11 ай бұрын

Chad you and Doug and Jolene are doing a great job. It's nice when you can see people work together and get along with each other and enjoying what you do. Hi Jolene you are doing a great job with the camera God bless and have a blessed night

@Sully_media 11 ай бұрын

How can people say this man does not know whst he is doing. I challenge any of the niegh sayers to complete that quater panel and make it look that good.

@bardricmacgregore4863 11 ай бұрын

I learned today.. thank you very much Chad.. good camera Jolene!! Til next..

@OldBondoBilly 11 ай бұрын

I love your projects. I don’t have time to watch like I used to, but I watched this one cuz you said no warpage. When you said full blast on the welder, I knew I would like it. I use .030 flux core with 80 amps for 20 gauge (90 amps for plug weld) and do it about the same way. I like it cuz it’s much less grinding 😊😊

@Zanehoward88 11 ай бұрын

Anyone of us could use the contour machine to clean a panel. I sure would have loved seeing the process of forming the metal at the back under the fin

@georgeclements2742 11 ай бұрын

Excellent tutorial. It shows that you need skill to butt weld long panel seams but you also need patience. You just can't rush a job like that. Thank you and good wishes.

@philipjohnson2608 11 ай бұрын

Chad what wonderful workmanship brother thank you for sharing such beautiful work. Nothing but the best to you and Jolene.

@martylb 11 ай бұрын

Chad kicking ass again.

@darren7 11 ай бұрын

Fabulous repair chad all credit where due he is a great body stylist ,jolene has filmed another great educational program thank you guys

@keithmccormick1272 11 ай бұрын

Back in the day say 1960's , we used to braze weld one inch and quench with a wet cloth , worked the same . Enjoyed your video

@martylb 11 ай бұрын

Chad kicking ass.

@anthonyconcrete 11 ай бұрын

10 points of 10. You are really good! 👌👍

@davidsimpkin1213 11 ай бұрын

Looks really good Chad !!! great work also Jolene !

@gerrycomfort7027 11 ай бұрын

I NEVER NEW YOU COULD DO THAT WITH THAT MACHINE VERY COOL MAN CHAD ALWAYS ONE STEP AHEAD

@dral9657 11 ай бұрын

This is where your experience in this area ,is why I am interested and my respect is at its highest level. Your patience here is obvious as well . Very good guys ! Jolene ,although I haven’t given credit that is probably overdue, thank you for doing what you do and doing it well !

@troyadams1076 11 ай бұрын

Great job looking good 👍🏻

@JimmyMakingitwork 11 ай бұрын

Quarter panel came out and great and it's obvious that experience makes a difference! Only way to get experience, get to work!!! Haha

@randylenart9674 11 ай бұрын

Very good job on making that quarter panel from scratch

@shake-the-earth1 11 ай бұрын

Great tip Chad. You would definitely know since you probably welded sheet metal from the earth to the moon and back.

@mitchelllavalley3497 11 ай бұрын

Beautiful just Beautiful and it dose not have paint on it yet Great job Chad!

@mdogg1604 11 ай бұрын

I've learned something......your welds are like dance moves....weld one, two, three, cool, skip, weld one two three......

@kevinmcleod7580 11 ай бұрын

Hook up with a air line and cool it down ! Thumbs-up I'm remembering tips you gave out to the Hiltz family's. Yup I'm still watching and learning but now I'm remembering the basics so let's get started .

@robertnoble4865 11 ай бұрын

Once again Chad proves he is the "Master of Metal"!!

@richardjennex6583 11 ай бұрын

Good evening Jolene and chad hope you had a wonderful weekend also thank you so much for sharing your information and knowledge

@temahenoniania6623 11 ай бұрын

Good job to chad and Doug looks amazing and queen jolene on the camera

@Hneely 11 ай бұрын

No doubt that is the largest panel I’ve seen welded on any car. I’ve watched a lot of channels before I discovered Bad Chad, and any more I really don’t watch much of the others, there is only so much time in a day. Just awesome watching this tonight.👍

@johntretten4712 11 ай бұрын

Chad, I have a 56 Dodge (for 38 years) and Love the work your doing on this Plymouth, Excellent camera work Jolene

@stevenhodges338 11 ай бұрын

The guarter panel all ready looks great.

@mikeross5820 11 ай бұрын

Fantastic job Chad,That panel looks great.Great job Jolene.

@bluepov 11 ай бұрын

I'm learning a helluva lot from Chad but it would be nice to be able to hear what he's saying.

@heyjer8000 11 ай бұрын

nice work edit - after all that welding you bet we've seen grinding before!

@barnsy4602 11 ай бұрын

I don’t work on cars but I love to watch you fix and build cars ❤

@amyallemand9144 11 ай бұрын

Realistic work type of job making it have value a future

@ferguscosgrave7510 11 ай бұрын

Big difference between the two sides looking good thanks

@rozijohari59 11 ай бұрын

I do appreciate your work Chad.. Good job..

@bernarddiantonio3722 6 ай бұрын

Thanks for sharing your awesome talent 👍. Simple straight forward instructions, with common tools and resources.😎

@user-uu9wo8gl1m 11 ай бұрын

Beautiful work Chad and exactly what the best shops in the world do.. except it’s done by the Chad Master! Thank you for showing us your way! Awesome. 32:24

@SilverBack. 11 ай бұрын

Sweet fix Chad, Great video footage Jolene 🙌🙌🙌🙌🙌🙌

@larrybailey43 11 ай бұрын

I like what that tool does !

@tombob671 11 ай бұрын

Once again the master of his craft makes it look easy. Chad you are that master! Thank you!

@BillMac69 11 ай бұрын

😂its turned out great and i like the shape around the rear lower fender it actually looks better than the original i think more rounded ...And i think its funny no comments from the critics on this saying how they could do it better or they do it this way ...why because 99%have never made or attempted to make a whole quarter panel...

@charlielemmons5525 11 ай бұрын

The quarter fender looks great. Maybe should have put a coat of rock guard on the inside. Hopefully the other side will be easier. Chad and Jolene are awesome.

@duanedale2505 11 ай бұрын

A lot of hard work and precision well done

@jessiejames2155 11 ай бұрын

Finding a gem that doesn't need 50 patches =what an awesome catch !

@waltmarks9720 11 ай бұрын

Very nice job Chad and Doug. Great video Jolene looks wonderful 😀

@ashleydubbeld9236 11 ай бұрын

👨‍🏭👍👍👍👍👍👍👍awesome job on the new quarter panel all from scratch wow you are truly a craftsman and artist being able visualize in your mind’s eye it’s so great two people helping you on your project builds to me it looks like you guys get a long really great 👍 Jolene always with awesome camera work thank for letting the in on channel and the amazing content 👍👍👍👍👍👍👍👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏is it me or did 57 Chevy steal this fin design 🤔

@ratt727 11 ай бұрын

Good tech session

@ejharrop1416 11 ай бұрын

Qtr panel looks epic!! Very nicely done. Going to be a solid car. Thank you, take care and peace out.

@user-li5er3rr5q 11 ай бұрын

Best video yet have a better understanding what it takes to replace a rear quarter panel fabrication and welding and how to solve problems when they come about cause they always do .The car is looking fantastic thanks for being a great teacher.

@clarkpink1955 11 ай бұрын

Inncredible work made from scratch

@peterwade1796 11 ай бұрын

Wow Chad, this is amazing. Only you would have the brains and ability to do this. Thanks for showing us that it can be done with minimum equipment.

@elvisleitte6703 11 ай бұрын

Lhe considero um dos melhores construtores/artesãos automotivos DO PLANETA. VOCE É SENSACIONAL! Elvis Leitte, Brasil ,🇧🇷🇧🇷🇧🇷

@michaelbristol6467 11 ай бұрын

That's a thing of beauty Champ 👏 1 more side and that'll be the worst of it all done. 😉✌

@stellaestrada7406 11 ай бұрын

Great job so far Chaddy!! Amazing work! So inspiring

@yarkie1 11 ай бұрын

Great job guys!

@jerrylameront3846 11 ай бұрын

you are the man CHAD . I always used a cold cloth but that looks a lot better . 11:11

@StephenCann-to4mr 11 ай бұрын

That's does a great job on quarter panel looking good Chad and Jolene is good on the camera

@petefranghis738 11 ай бұрын

Good Job Jolene, your camera work is great.

@Frontireadventures 11 ай бұрын

A fine piece of handiwork. Craftsmanship.

@edwardmathewson9458 11 ай бұрын

Learned a lot about wielding, thankyou.

@davidmobley5984 11 ай бұрын

Hello hello everyone great job

@ernestlewis1718 11 ай бұрын

this guy is amazing plus jolene is super on the cameria many times im thinking get a closeup and bam she does a closeup love this program thank also to you tube

@chrismedaris4873 11 ай бұрын

That is super cool ty for showing this man them welds are crazy good

@bobbybelcher6800 11 ай бұрын

beautiful work !

@regmartin3629 11 ай бұрын

Nice work Chad. I also like the editing too, nice change Jolene. I like this style better than an unedited, real time video. We all know Chad is a super hard worker, and he never skips a step in a repair, so skipping to the next phase in the video is ok.