Love my Fix It Sticks! So great for working on my firearms.
@hulltacemergencymeddr.hull437010 ай бұрын
Excellent! I’m so glad I watched your presentation. I decided even though deer hunting has already begun in Oregon, I was going to mount my Trijicon Credo 1-8x on an FNH short heavy barrel Police Sniper Rifle. I’m having Amazon deliver you exact setup today! I bought the rifle at the suggestion of a Navy SEAL sniper that I met on JBER in Anchorage, while I was working in an ER and teaching some Tac Emer Med to USAF PJs who were doing some training in the ER. I did get to care for a Grizzly Bear attack victim, as I watched my Rucking handgun progressing from a 357 Mag revolver ➡ 44-Mag as I watched Grizzlies from my home’s window ➡ 500S&W once I had a close encounter with 2 different Grizzlies in the winter. The rifle has a MIL-STD-1913 Rail above the bolt. I’m attaching a Quick Release SPUHR 34mm Mount + Rings, learning about Fix It Sticks as I wait. ⚕🇺🇸
@ZachDoesBricks5 ай бұрын
Love this video, I would definitely invest in their brass hammer head as well for this particular kit to use in tandem with the roll pin punch. I’ve been strongly debating getting the works as I’ve seen many firearms enthusiasts use these fix it sticks, and I myself am becoming more and more enthralled in the wonderful world of pew and all things mechanical. Currently working in fast food and it makes the cost very hard to justify, but I think I’m sold after watching a few reviews of it, yours included. Keep up the good work brother, you’re very well spoken and the straight to the point no nonsense explanations are perfect for me, subscribed :)
@oceres4 ай бұрын
NICE! I thought to myself, the only thing this is missing is a hammer, boom! Thank you!
@NextMRV5 ай бұрын
This seems like a decent kit but I can make the same kit with name brand tools from snapon Klein ect for about half the price and it’s less than half the price
@ceehads4 ай бұрын
Anything designated for guns, pets, or babies automatically costs twice as much 😆
@poerelative1877 Жыл бұрын
The pick you referred to is for removing the slide stop on a Glock. It's sharp end would catch the top of the spring so you pin the spring in the bottom of the lower while you slide the slide stop out. Putting it back in is the same as taking it out, in reverse.
@hazehendrix71333 жыл бұрын
Good thorough review. Thanks!
@DeFenderCo3 жыл бұрын
Glad you enjoyed it! Thanks for watching my homemade content.
@cncmillman Жыл бұрын
3:17 instead of using sharpie paint pens for your automotive projects I would recommend getting "Schraubensicherungslack" (screw securing and thread-sealing paint) from Germany which comes in a lot of different colors. I use the Baeder brand.
@DeFenderCo Жыл бұрын
I'll check it out. I appreciate the recommendation.
@fixitsticks Жыл бұрын
Appreciate the review!!
@DeFenderCo Жыл бұрын
Thanks for making such a nice product!
@michaeldavis2524 Жыл бұрын
I think you mean inch pounds!
@88hammar2 жыл бұрын
15 ft. Pounds seems excessive. You sure it isn’t inch pounds?
@DeFenderCo2 жыл бұрын
It 100% was inch pounds. I work on cars where I'm used to saying foot pounds, so I misspoke out of habit.
@victorglaviano Жыл бұрын
It is in/lbs!
@alexandre03193 жыл бұрын
Good stuff. Love this channel. Also, the open door behind you is very distracting.
@DeFenderCo3 жыл бұрын
Good feedback; I wasn't expecting my daughters to be home or bring their friends with them.
@FreestyleFTW92 жыл бұрын
Keep making great vids👍
@tacratt609111 ай бұрын
Are you a mechanic? You have some cool toys!
@86steventura Жыл бұрын
Only wish it already came with the 2 in bits for that price. The all in one is too thick with most handgun optics and will scratch or destroy your screws at an angle.
@williamwimmer54733 жыл бұрын
whats the total weight on this?
@DeFenderCo3 жыл бұрын
I am not with it to weigh it, but for sure under 2 lbs. Probably around 1.7lbs.
@nunzionapoli63252 жыл бұрын
How accurate was the torque wrench?
@DeFenderCo2 жыл бұрын
Its super accurate. I checked it against my Snap-on 1/4 drive torque wrench and it was spot on.
@ejaokay2 жыл бұрын
I don't get these, they're crazy expensive, and there are cheaper options that are more accurate? There are adjustable torque limiters online with +/- 5% accuracy while these are +/- 6% accuracy.
@3vil3lvis8 ай бұрын
The issue with the philosophy of Buy Once, Cry Once is that it doesn't take into account breakage, theft, loss, and the power of iteration. It's rarely one and done.
@jayj41428 ай бұрын
1. Secure your s***. 2. Don’t lose your s*** 3. Diminishing marginal utility.
@3vil3lvis8 ай бұрын
@@jayj4142 1.) Are you of the opinion that thieves are incapable of opening locks? Are you guarding your stuff 24/7? If so do you even own your stuff, or does your stuff own you? 2.) Not talking about that time you didn't lose something, rather that time that you lost something. Have you never lost anything? Do you think people do that intentionally? 3.) What do you even mean? The power of iteration refers to incremental improvements over the lifespan of a product. For example the fix-it-sticks in the video are the old version and a new ratcheting version is on the market. Improvements happen and so you are never finished buying stuff. Buy Once, Cry Once is a logical fallacy that sets the unreasonable expectation that you are done paying forever.
@Rossski3 жыл бұрын
Wish this entire vid wasn't out of focus
@DeFenderCo2 жыл бұрын
I also wish I had noticed that before editing the whole thing. forgot to put the camera on auto focus for 2 videos in a row. I hate myself.