I trust this man because he reviews this car with beer in hand

“Price just went down” fucking love this guy 😂

After regrettably selling my first tracker, I have finally returned to this video before going to see my potential second tracker. Absolutely love these cars, thank you for your service in the suzuki community Tony

PRICEEEE JUUUUUSSSSTTT WEEEEENNNTTTT DOOOOOWWWWNN 🤣🤣🤣🤣

"People ride around with no top on, let that carpet get soaking wet and sit there for a month or 2" I feel attacked!! 🤣😅

First things I look for 1. 4x4 2. manual trans

I have no idea why I’m so intrigued by geo trackers, but I really want one 😂

Everything he mentioned my tracker had lol I just welded the whole fucking thing back together

There are some more areas to look for corrosion: The body is mounted to the frame at 8 points. The mounting points at the very front under the head lights are okay most of the times, so are the mounting points at the very back. But the mounting points located ca. under the pedals and on the passenger side are rusted very often. The other mounting points are located in front of the rear wheels. These are rusted almost on every Sidekick/Tracker/Vitara/Escudo.

I'm looking at one of these tomorrow that have a stripped interior, the guy used it as a hunter rig and it is (relatively) cheap. Thanks for giving me ideas on what to look for!

This is like the best KZfaq video I've seen in weeks on any subject.

That laugh at the beginning has me on the floor 😅😅😅

just got a 92 tracker for 2500 canadian your website and videos are awesome!!!

I didn't know what to expect in the first two seconds but boy this guy is awesome. V entertaining and informative, thank you!

i love this dudes energy

You were extremely thorough

This guy is sick and he knows what he’s talking about!

Great video my brothers and I have been talking about starting a geo club this video is going to be very helpful

you forgot the most rust prone section of these vehicles. The rear section where the plastic bumper meets the metal panel and that section of the rear wheel well just slightly back of 90 degrees. That section tends to rust right out and looks just fine from the outside. Same thing with the front bumper where it meets the fender.

damn just started looking into buying one this is super useful thank you

This is definitely one of my favorite car videos I've ever seen on youtube

I trust this dude he puts off the best vibes fr

im doing one that was rolled both mirrors gone windshield busted on pass but she still runs and drives like a dream going to sub to this guy

Needed a refresher - I was a sub for a couple years. We had 2 of these. Moved to Arkansas a couple years back. Looking to get another one or 2 or 3. Thanks - Excellent as always !!!!

I bought a 1990 hardtop. It was awesome.

I don't know much about cars or anything but this is my favorite video ever

Guess what?! Price just went down. Looking at trading my car for a sidekick, great info. Thank you!

Thanks for sharing! If i found a beer can in the engine, will buy!!! But seriously, great video and funny!!

I watched this and it helped me to get a better deal on the tracker I bought today. Great video!

Street legal side by side. Mine's a 1990. Manuel shift. Manual hubs. Red/black. Very capiable off road (stock). Reliable as hell but easy to fix any issues out there if you need. Gets down those tight trails without all the extra pin striping. Best in town runabout for fuel, parking, ... and climbing the odd curb. Removable top is cool. I always leave my hard shell (rear & driver sections) sections on then cruise with the driver/passenger section either on or off on a whim. This piece slips in behind either set of seats easily. I use my big pickup for the big stuff and use this little guy for all the rest. Always get offers to sell it ... monthly if not weekly at times ... kinda says it all. Great video👍🏻

just got a new subscriber once the hood popped w/ the miller highski in there. great work, friend!

price just went down. Love it.

looking to buy my first samurai and your videos have been an amazing resources! Thank you so much for putting all this info out there, youre amazing! :)

Can’t wait for the key way video! Been wanting to check mine for a while and will always take your guidance!

"would you look at that" 😁 another Ed Bassmaster fan here.

This video made me laugh every single time he said "Price just went down" 😆

My rockers were gaping open, I filled them with spray foam and actualy put the plastic trim on. Bashed them on some stumps, solid as hell. You also gotta check the rear body mounts in front of the back tire too. 8v valve cover gaskets leak when old. The rear speakers were rotten on both of my trackers.

Dude yes. You are exactly who I trust with this knowledge right here bro. Yes

I might get one for my first car someday hopefully

Proud to be a wisconsinite after watching this lol

Wish I had this available to me before I bought mine! All the tricks! Thanks again Tony!

LOL love the video man! Entertaining but also informative. Keep em coming.

Very detailed and fun buyers guide video man! Price just went up! up! up! 😄😁😄

I like it when the price goes down

My very first car was a purple 95 geo tracker back in 2007. My girlfriend now wife called it a Barbie car, but she still married me so a wins a win lol. Miss that car

First we get the money, then the power, then the respect!

Ive got a 2004 chevy tracker 4 door hard top v6. Almost rust free from California.

Man is right, i bought a geo tracker beautifully modified 3inch lift 32x tires, didnt check it properly it was rotten away, i work 3 yrs to weld out on my free time

Got a 92, had if for 10 years all california miles and the only rust I have is under the driver side tail light😎

4:30 Sets down beer in engine, next to other beer already in engine. Price just went up!

They like to rust in the firewall and where the bonnet hinges are as well… as well as the front pillars and in the door hinges to the point where the doors will fall off… and in the boot under the bracket that screws over the carpet too … and on the hardtop ones they rust from the inside out where the window washer is just above the back door because washer fluid gets trapping in the top sill and cant get out

Well I tell ya what, I'm just gonna look right at it! 👌

check under the rubber of the door seal at the top of the windows. Those are notorious for rusting right out

You remind me of my Uncle Mike, anyway I am about to buy

There's a really cute 1990 Geo Tracker listed on my local Craigslist. 98,000 miles, $4,200. It doesn't appear to have any rust problems based on the pictures but I wouldn't necessarily be able to tell whether or not they just painted over it or something. I know next to nothing about cars and can't tell if it's in legitimately good condition for a good price. 😩

Thank you for sharing your knowledge. It is very good info with good content this video helped me buy a 95 tropical green tracker 🤟

Switch that beer for a whiskey and it’s Julian from trailer park boys 🤙

it's Miller Time inside that engine lol

you are a god among men for making this video

thats the wrong emblem on the door!! I should know, i've had 47 of them

Dam this thing is clean 😎

Thanks for the video

Million thanks Tony this video it’s super helpful, but can anyone tell me if it’s legal to drive this vehicle in the state of Florida?

Thanks, Julian. Say 'Hi' to Ricky and Bubbles for me, will ya? In all seriousness though, that was an extremely informative video. Thanks for taking the time and effort to do all that, my dude.

If you are looking at an 8valve(samurai same deal) check the #4 cylinder compression, they like to burn the exhaust valve! I haven't seen a sidekick or tracker with crank windows that work well! Just take the doors off to fix that! Also if you put the 2" body lift and you wheel it hard, don't be surprised if all 8 body studs rip out(ask me how I know) but you can just weld in plates and then put bolts thru.

Just bought one of these, price just went up bud. She's mint!

Being in Colorado with all the road salt in the winter you really see cars age after awhile.

I just bought one....its a rough one,dudes been using it to go hunting..but it has title and solid frame.....hopefully it does me right.

Say hello to My little friend!!! Nice shirt

Found a rust hole in the cross member tube located in the center of where the rear bumper mounts. Only saw it when i removed the gas tank.

I’m getting ready to buy my moms old tracker, I’m probably going to pick your brain a lot lol hope you don’t mind

Thuu it s video makes me really confident with my 1000$ geo it’s 5spd and 4wd and has no rust in any of these places

Great vid. You're a top presenter too! Hi from Oz.

I sheet metal screwed the tin 'floor pan' in mine and the fuel tank is held up with cam straps over the frame as the front mounts are gone. You did forget to mention the fuel filler tube, where the body fastens to it. The rear wheel throws crap up and it just sits there.

The worst rust spots I have found on the vitaras is under front guards at bottom of windows and stuff

If Tony Montana went into witness protection in Wisconsin…

'this message was brought to you by Miller High Life.'

The guy litteraly look like Julian from trailer park boy , i mean the face the beard and the drink ...

This guy is great. High Life is the shit too lol

Ask me about the "check engine" light that never goes off. I own a 93.

Oh man im looking at a geo tracker! Guy wants 1500 for it. Red soft top stick shift. Outside looked great but haven't done a full inspection. Are the engines reliable? Doubt it has rust being down here in texas but will test the sideskirts and see if rust falls lol. Thanks for your tips.

Meeeettttaaalllll soft top trim!!!

Because rust you can also lost your rear axel on the highway ha ha.The over the axel link fixed on the frame most time a very "rusty" frame.This Video was brought to you by Miller ha ha.

Just look at it!

Hey man I know you probably get this a lot and might not have time to respond but it’s worth a shot. I have a MINT 1998 Chevy Tracker 4x4 with only 70,xxx miles it has a big sentimental value to me as it was my fathers last vehicle. I hardly drive it because I want to fully restore it. It’s bone stock and no rust runs amazing with the exception of one thing. P0740. It’s the 3 speed automatic 3L30. Mechanics where I live are not very trustworthy unfortunately. I’m tired of just throwing parts at it. I NEED TO FIX THIS! please let me know if you could be of any assistance or if you have time. Love your videos man I would absolutely love to meet you some day! Keep TRACKIN! MIL @ 47 mph Edit: got any manual trannys for sale? 🤔 Also.. are you hiring?

This video is awesome

You for got about the transmission and noise wore out bearings they need to check for that

This dude is awesome

Omg!! Your hilarious ! I just found a tracker near me. Shit .. It is probably junk. Is the car your reviewing for sale? Thanks Man, your video probably saved me some cold hard cash

Great video thanks

first place I look is at body mounts in front of rear wheels and then the body mounts behind front wheels. Those rot easy like their rockers and rear seatbelt bolt. Not as easy to fix though.

Reminds me of Billy Walsh from entourage

All those price went downs lol yeah so that's why mine was free 😂

How warm and flat is that beer? I can help you out with those Miller's

Was hoping for more hidden High Lifes. :P New to this group. Where's a good place to start on vids and lit?

how much do you think black spray paint over the original teal decals and the tracker logo would mark off the price? Im looking into buying a geo tracker.

What are some valve issues that cause white smoke? I have white smoke. Im buying a ton of parts just to tune my new-to-me sidekick and freshen up some things. But i have a little white smoke.

Is this the real life inspiration for Julian from the trailer park boys?

had a 1992 suzuki sidekick 4 door. no major issue until over 200,000 miles. Did have a known wire issue with it and a crack in the radiator. The engine at that point around 236,000 just keep blowing head gaskets and was worn out. sigh.

I turned one of these into a tractor but had to swap a Wisconsin engine into it because the suzuki engine had enough blowby to make a wind mill grind your kernels...