C4 Fabrication 5th Gen 4runner Rear Differential Skid Plate Installation

Рет қаралды 3,135

4 жыл бұрын

Did our video help you? If so, consider buying us a beer: bit.ly/3feE6tJ
*PLEASE READ THIS VIDEO DESCRIPTION FOR HELPFUL INFORMATION*
In this video, we show you how to install a C4 Fabrication Rear Differential Skid Plate on a 5th Gen Toyota 4runner.
*C4 Install Video*
• 2010+ 4Runner (non kds...
*PARTS*
C4 Rear Differential Skid Pate
www.c4fabrication.com/product...
*HELPFUL TOOLS*
If you're looking for other tools not used in this video, check out Timmy's Master Tool List.
www.amazon.com/shop/timmythet...
*6 Ton Jack Stands
amzn.to/2MM91w6
*Heavy Duty Rubber Wheel Chock (This is just one. I recommend buying two) amzn.to/3lNC3MG
*CDI 3/8" Drive 10-100 Foot Pound Torque Wrench

amzn.to/2U2vUA4
*1/4" and 3/8" Flex Head Ratchet Set (used the 3/8" ratchet in this video)
amzn.to/2ql8nNA
*Stubby 3/8” Flex Head Ratchet - (it use to be available for sale separately but now we can only find it as part of this 4-piece set) amzn.to/39kQVit
*3/8” Drive Regular Extension Set
amzn.to/2OehCao
*3/8" Drive 6 Point Metric Standard Socket Set
amzn.to/32WIh0M
*3/8" Drive 6 Point Metric Deep Socket Set
amzn.to/37iQjVt
*Flex Head Box End Wrench Set
amzn.to/31x8BOo
**As Ebay Partner Network members, we earn commissions from qualifying purchases.
**As Amazon Associates, we earn from qualifying purchases.

Пікірлер: 27

@g.fortin3228 Жыл бұрын

I'm going to order this one, looked at the options and this one looks to be made really well. I'll also use blue loctite on the threads to help avoid rust and help them not vibrate loose. Thanks for the great install video, it was well done.

@TimmyTheToolman Жыл бұрын

You're welcome. Good luck with the install.

@AntonioClaudioMichael 4 жыл бұрын

Very nice skid plate for the Diff love that it protects the u joint and flange and the actuator for the e locker great install video Timmy

@TimmyTheToolman 4 жыл бұрын

Yep, C4 products are very well thought out and built.

@AntonioClaudioMichael 4 жыл бұрын

@@TimmyTheToolman i agree 100%

@ericforberger 2 жыл бұрын

Thanks guys! Just used this vid to install mine.

@TimmyTheToolman 2 жыл бұрын

You're very welcome.

@AntonioClaudioMichael 4 жыл бұрын

Great video Timmy

@TimmyTheToolman 4 жыл бұрын

Thanks Antonio.

@scubbarookie 4 жыл бұрын

Thank you Tim and Sean. Also special thanks to Garret and Caleb for making this possible. This skid plate is nice! Do they make them for a 3rd gen 4runner? 😨

@TimmyTheToolman 4 жыл бұрын

Currently, C4 isn't making anything for 3rd Gens but maybe they will decide to break into this market. I have a rear differential skid on my 1998 made by Bud Built. Here's a link to the video I made installing it: kzfaq.info/get/bejne/hc18ebiExs3dcpc.html

@FeistyKev 4 жыл бұрын

Quality stuff

@TimmyTheToolman 4 жыл бұрын

Yes, C4 makes very nice products.

@osleimonteiro5726 4 жыл бұрын

Hello Timmy, how are you! I don't miss any video from your channel, because I see a lot of love and professionalism with our 4Runner. I know that my problem is not relevant to the video, but I hope you can give me some tips. I have a 1997 4Runner 3RZFE engine and I am experiencing problems with strong cracking when hanging in side trenches (chassis twists). when the wheels go up and down together nothing happens, only when one wheel goes up and the other goes down, does the cracking happen. I’ve already checked, pivots, bushings for steering end trays and they’re all OK. I hope you can give me some tips. Much obliged! Oslei - São Paulo - Brazil.

@TimmyTheToolman 4 жыл бұрын

Hey Oslei, good to hear you're a fan of our channel. In regards to your problem, sway bars, control arms, coilovers, springs and body mounts are what I would inspect. Something sounds loose or worn out and is shifting causing the cracking sound. It sounds like it could be a metal on metal area rather than a bushing that might be squeaking. Figuring something like this out can be frustrating because it's not like you can reproduce it while you're under the rig examining things. Now, if you had access to a fork lift and you could get under the tires to flex the suspension and see if you can determine where the noise is coming from. You might also set something up or maybe there a loading dock curb you can drive up on to flex the suspension while a friend is outside watching and listening to get a clue what's causing the sound. I hope my suggestions help you figure it out. Happy Wrenching!

@osleimonteiro5726 4 жыл бұрын

Thanks Timmy for the tips, it really is not easy to find out, I already took several specialists and Toyota itself and they could not find out! I will try to simulate as you suggested! thanks!@@TimmyTheToolman

@TimmyTheToolman 4 жыл бұрын

@@osleimonteiro5726 Well, hopefully with a little flex simulation you and a buddy can figure it out. Let me know if you do.