Happy Birthday Clinton! One day your Sons will have fond memories of spending quality time with their problem solver Dad.

You are amazing dad and it’s very special how you treat your son like partners instead of sons and how all 3 of you get along with each other’s

That roof blade antenna is typically found on the bellies of light aircraft, tuned for 118 - 124 Mz. When a truck is running around a towered airport they have to be in contact with the tower/ground control to get permission to cross runways and taxiways. There used to be a mobile radio in that truck.

Have less work change cabs over, than cut out and replacing all the rust. I think you made a very smart decision, can't wait to see more.

Your commitment to perfection even on "toys" is proof you deliver the highest quality equipment. Very impressive

We had an 89 F super duty back in the day , 460 5 speed with a 12' flatbed , it would flat out get it and would do some pretty impressive burnouts ! I was young and DUMB .

My dad had a 1992 F350 crew cab with a two tone paint scheme, dark blue with silver. Loved that truck. That Bronco you shower is awesome and I love the color. Grandparents had a 1990 two tone tan 2 door Bronco that I wished I still had. Great decision swapping cabs and doing it right by painting the entire cab inside and out. It’s refreshing to see someone on KZfaq actually do a restoration the proper way. It’s wonderful you got to work on it with your sons something I try to do with my son all the time passing on what I’ve learned through he years just like i did with my dad at his company as well. Been restoring trucks, cars and tractors and building oilfield semi trucks since I was a kid. Started learning to weld when I was 12. Rebuilt and did a 24 volt conversion on a D6 Cat that someone had painted hot pink but we repainted it cat yellow. Great times!

R ember one thing ! More boost is more pressure on the pistons and rods.If you are running a stock bottom end.#6 is can be instant death!!

The antenna was for contacting Base Ground control and emergency. Mostly it was used to get permission to cross the runways.

The boss lady better hide the check book QUICK.

Clint is a very smart man, he knows a little bit of everything 😉 nice working with the boys too!!

I could have watched this type of show all day long. It always seems that they end way too soon. Your clips are fantastic.

Your children are learning alot...whether they like it or not. Blue Sky's.

One other thing when my brother graduated from high school he was 18 and 5'10 at the same time I was 11 and 5'10 ,when I was 14 I was 6'4 my brother was still 5'10 and at 15 I was 6'5 and my brother ,fresh from Vietnam, made me hold targets at arms length so he could site in his new deer rifle. At 18 I was 6'8 and didn't take no more guff from my brother, but I still respected his marksmanship he shot a fly on a target at 200 meters even have the target with the fly guts on it, he always had the last say.

That old truck is gonna make some good memories. They will be able to look back in ten years and say to each other remember when we completely rebuilt that old ford. What a job and its just as nice as it was back them. MAKING MEMORIES IS WHAT IT IS ALL ABOUT.......

It’s very ez to see mom has raised the three of you boys very well,

You and your wife did great job with your boys you to need to be proud of what you did and have

Thank you for keeping those young men occupied and learning! What a blessing to have such sweet young men.

My Dad owned a 24/7 on road taxi when I was in high school. Loved the days he would wake me early to ask me to help service or repair the cab and I'd spend the day with him in his workshop/classroom instead of school. Happy belated birthday Clinton.🖖

I just recently subscribed. What a great role model for your sons. I like how the knowledge and patience is passed down through the generations. I look forward to catching up on some old content.

A paint job done right😎😁 Taken apart , disassembled, Scrubbed sanded primed repainted to likings. Well done Special K sausage painter. To the rest of y'all pat yourselves on the back because ya dun good👍👹

Hello from Canada love the show I'm a heavy equipment operator as well plus with all the funds I've saved over the years I've bought a 3/4 ton 4x4 2020 ford I've now got over $90,000 invested on top of the purchase price so trucks are never ending projects I've won multiple awards from showing my beast in diff USA/CANADA SHOWS

In my humble view, the happiest Birthday present you could get would be a weekend like that working with your boys. At least on video, your relationship and easy communication is a joy to behold. And: Happy Holidays!

All good decisions time is cheap when you’re making memories with your boys love seeing you guys work together keep the videos coming

For a really old guy, I still get excited about reconditioning one of these older trucks! I really like this one (except for the weird running boards) and look forward to watching this video. What fun!

🙋‍♂️ I vote for an amber and white strobe kit. And 🙏 please don't forget to transfer the roof marker lights!! Classic HD truck look.

WOW! Gone from a SIMPLE Paint Job, to A Mayor Mission!! Post Happy Birthday to You!!❤❤😊

You made the right choice by getting the other cab. You gave your sons a life lesson. Safety first.

I see C&C Trailers is back open for business with that one up on the hoist. 😉 🤣😂🤣😂 DP got you hooked.

At 15:54 when I heard you say, "It's never gonna be 100%", I knew I had to make a comment. Sounds like you need to send this body work project to Robby Layton out here in Utah. He's got a YT channel and you should see what kind of AMAZING work this young guy can do. He would bring this cab back to 100% or even better; I would bet a couple choice body parts on it.

Up in Canada we put salt on the roads during the winter. It does wonders for the body on our vehicles.

The obvious training your sons are getting is priceless. God bless you and your wife for that. My son was difficult but has gone on to become an electrical and soon to be computer engineer and works for a certain university on a certain Large Hadron Collider. It warms my heart to see the young ones take to good things. Would you mind filling me in on the 1st montage music? I play guitar and need to put that piece in my song book.

I like the fact that you raised your shop crew!!@

Wow. What a nice project to do with your sons. The best way to learn.

Clinton, it's good to see you and your boys working on the project together. I miss working with my dad as he passed a few years ago. You don't realize how much you will miss those special times.

Yes the four door Bronco that will be a special video right Hunter!😅😅

You made the right call,trucks that vintage here in Canada are usually toast.

Yup they’re a couple of good young men learning from a very experienced man their Dad you do things right Clint and what ever they do get into I’m sure they will do well you do inspire exultant in your quality of work you do your sons know that you’re down right cool to be around i see in them towards you they do pay attention 👍😎🇺🇸NY

Has to be said. Hats off to you for getting those boys out there and doing useful man stuff with them brother.

That's why I use rust converter on any surface rust & then if I m installing new panels I use weld threw primer so I know anything behind the new panels is protected & I use por 51 which is awesome just rember to use gloved cause it will not come off ur hands only way is to wear it off 😀

Clinton you and your boys are amazing! They are very respectful hard workers and eager to learn! When they get older watch out, there’s no holding them back! Thanks for sharing! Kevin

What an awesome amount of work. So nice to see how well you all work together.

You sure got into a can of warms but it looks like you did the right thing

This is an outstanding project for those two young men to get into with Dad, so much how experience, teaching two youngsters with a good aptitude for the mechanics of how things work. Dad and Mom have two fine young men to work with there, one sees young men like that working along, gives hope that this country still has a future. Thanks for the ride along sir, Merry Christmas to you all.

What an awesome shop these kids have to play in. Hope they realize they are living the dream. I am living vicariously through them!

Going to be a great truck once you ,Hunter, and Tucker get it done. Happy Birthday Clint and Merry Christmas to you and your family and the rest of the C & C crew

Great video and I didn’t envy you having to change cabs but at least you had a good cab. It’s fun to watch dad and sons working on a project together. You are definitely a really good dad. Look forward to the next video on this. Love the channel.

Clint you have the Dream Team with your Sons. I Subscribed keep up the good work.

Thing on the roof is a UHF radio antenna to allow the driver to talk to the aircraft.

Just key in the words F650 Ford. Ford never made a F650 pick up , but a guy made a pickup with with the 12 ton cap. cab and frame using the lighter pick up body panels and I believe it was a crew cab, so you may have to acquire one to finish this.

I enjoyed watching the vehicles being transformed. Your boys work well together and with the leadership shown the task of swapping the cabs will soon be achieved.

Your sons are learning a valuable skill working on trucks and equipment. When you finish a job or project they can look at it and be proud. Great job!

I just love it when you 3 guys are working together.You got 2 hard working boys there.

That is a bummer about the original body, at least you had another cab laying around.

Your dad skills are really showing!!!!!!!!!!!!!!Merry Christmas to all!!!!!!!!!!!!

Clean cab right decision swaping cabs to much labor involved to repair old cab looking forward to seeing how it looks when done Kevin has the right skills to make it a look great

Great family fun! You guys work fast. Happy Birthday Clint from a fellow Scorpio!

Once again the C&C boys are taking on another monster project. I know it we be done proper tho. Thanks for sharing this.

Love this, great job guys

One nice project for dad and the boys!! Hunter and Tucker are taller than Kevin….probably see a lot of things he missed!! One thing about Sausage fingers….he always looking up!! 😂😂 He’s a good guy!!

Good catch ! Glad new paint didn't happen first. Phew. Happy long time back birthday. Had mine on the 28 oct.

Looks like a great father and sons project. At least you have a nice big warm shop to work in and spread things out.

Very interesting video. And happy birthday. Thanks for taking the time to share.

Looking forward to seeing this transformation

Great, another fun project for me to watch. Merry Christmas and Happy New Year.

It’s good to see fathers and sons were together in the shop by the way anything else after 30 years old we don’t count the birthdays no more lol

Merry Christmas C&C and happy birthday

As a long time High school teacher of very young adults and trainer for Civil Air Patrol cadets headed for the three academies, One thing is very hard to “bust.” Crossing arms crossed the chest show a defensive posture. Need impress with positive stance. Hunter is very fortunate to have you for a dad but he does not know that. Keep up the great instructions for the boys soon to be young men before your eyes.

Would like to say merry Christmas 🎅 🎄 to the C & C Equipment team hope you all enjoy your day on Sunday and a happy new year 🎉

What an undertaking. Good thing you have Hunter and Tucker to help. God bless

Awesome teamwork guys.

Good learning experience for the brothers

Merry Christmas to your family and the entire crew

Great project with the boys! Merry Christmas to you All

Excellent life lessons. Great to see you sharing your knowledge.

Well the 87 cab looks great way to go I think happy belated birthday Clint great watch guys 👍👋🇨🇦

I'm in the metro Detroit area and was privileged to witness some of the prototype and preproduction development of ford's trucks. lifting the cab and fender assembly as a unit was a standard service procedure, put the truck on a lift, unbolt everything underneath lower the truck reset the lift, raise the cab and roll the chassis forward to service the driveline/engine components and then reassemble, actually faster and less likely to damage the body/paint. Use the clean Texas cab, Canada doors if they clean up good. Swap out the upper firewall pieces by drilling the spotwelds and separating the panels with a scraper. Odds are the welds are in the same places on both truck,s so alignment is easy with an icepick Check VEHCOR's channel for the easy way to remove and replace panels at the factory seams for an undetectable repair, he builds totals for resale and shows how to replace panels like the factory builds the vehicles

Well damn...some unpleasant surprises popped up. Everything has a solution depending how much time you want to spend on repairs. Great family project for you and the boys.

"No, the trailer shop is not open"... I laughed way too hard when you said that. Rust sucks. I've changed many cabs over the years due to rust. You said it right, it could be patched up but it's never the same. If I find a rust free cab for my dodge, I'll gladly take the time to swap it vs patching. And that's saying something considering I'm a body shop technician. Great video!!!

Here's hoping you all at C & C and your families have a Happy Christmas and Merry New Year

The Truck is looking good there 🤠

Okay Clinton happy birthday and Merry Christmas to you and your family and everybody there at C&C equipment keep up the good work on the videos and I'll keep watching God bless have a great day say and we'll see you on your next this is Bob from Vero Beach Florida God bless you all

💯% Right course to go. 👍Great to see Tucker and Hunter get some good daddy time in the Fo rd Project. Priceless.❤

Oops for sure Looks like the boys are going to learn body and Fender work in addition to their mechanical skills. Probably prove to be invaluable except that their cars will all be plastic when they buy new ones. Merry Christmas to you guys.

Merry Christmas to all the hard working guys at C& C Equipment.

Merry Christmas to you and your family and all the staff loving the videos mixed content

Good job very Enjoyable

Love to see the boys working and learning every aspect definitely going to be awesome too see the finished product. Yall have a Merry Christmas and a Happy New Year.

Soon enough Hunter and Tucker are going to be able to tear their trucks apart and put them back together in a weekend. I love the videos with you working with the boys.

Happy Birthday and Merry Christmas

Clinton you going to have to thing what your going to tell the boss. Happy birthday Clinton. You know your going to here I told you so. The boss is going to blow a gasket Kevin going to laugh his head off. Sorry for all the trouble at least you got the boys to help.

Great work teamwork makes the dream work,Happy Birthday Clinton and Happy Christmas and New Year to you and all your family.Also wishing the same to Kevin and the rest of the team.

Great work guys love the videos MERRY Christmas to everyone at C&C equipment

Oh man oh man on the next C&C Equipment video Mr Clint and sausage fingers build a new dog house for Clint and his project ford lol love the videos thow keep ‘‘em coming EH 🇨🇦🇨🇦🇨🇦🇨🇦 Have a merry Christmas too everyone

Holy cow what a can of worms Such a deal to have Sons who are good hands and plenty of parts.

A Very Merry Christmas to You, Your Family and all the Gang and Buds at C&C Equipment!!!

You and your boys do wonderful work. Merry Christmas to you all... and Kevin.

Great video! Thank you!

You are fearless! Great video! I'm looking forward to watching this entire sequence. Merry Christmas, stay well, stay safe!

Happy late birthday, and merry Christmas to all Ray from Oregon