Cabinet Levelling Feet from Hafele

Рет қаралды 13,197

3 жыл бұрын

3 variations on the ‘integrato G’ levelling feet. Also known as plinth adjusters, for levelling cabinets for fitted furniture. With reference to all the correct codes at www.hafele.co.uk
You can order hafele products via many ironmongery suppliers including Isaac Lord and Hart wholesale (www.blum.org)
More information on these and even more variations on this type of levelling foot can be found in this blog post:
www.buymeacoffee.com/p/85807
Finally, if you want to see the finished project on which we used those low profile feet it’s this one:
pCCwLJsrD1...

Пікірлер: 32

@md-fq9ye 7 ай бұрын

This is not Hafele , it is Italiana Feramenta ...great video..😊

@morganskinner3863 3 жыл бұрын

Oooh, they're nice adjusters. Hadn't seen them before, but these will be useful for an upcoming project I have in the wings. Thanks for posting!

@Alastair_Freebird 3 жыл бұрын

Morgan Skinner I’m glad it was helpful 👍

@robleach431 3 жыл бұрын

Just what I needed thanks!

@am11744 3 жыл бұрын

Glad it's not just me who finds the halefe codes hard work 👍

@manuelmedina4577 3 жыл бұрын

Thanks mate, just what I was looking for right now. I knew the 40mm one but not the 25mm. Thanks again!!

@Alastair_Freebird 3 жыл бұрын

I’m glad it was helpful 👍

@martinperezdelasheras1538 3 жыл бұрын

absolutly Helpfull... just what i was looking for. Greeting from Canary.

@Alastair_Freebird 3 жыл бұрын

Martin Perez de las Heras I’m glad it was helpful, thanks for letting me know!

@monty7891 2 жыл бұрын

Thanks were very helpful

@wandabout 3 жыл бұрын

Really useful- thanks

@Alastair_Freebird 3 жыл бұрын

Great, thanks for taking the time to comment

@apostoloskoritas9149 3 жыл бұрын

Good bless you

@kiwdwks 3 жыл бұрын

Thank you!

@Alastair_Freebird 3 жыл бұрын

Mark Aramaki you’re welcome I hope it helped

@kiwdwks 3 жыл бұрын

We both are in the same line of work and I enjoy following you. Wishing you all the best especially in these crazy times...

@Stranney 3 жыл бұрын

Your videos are really helpful, thanks for sharing. As a rule of thumb, how many of these feet would you use per metre? Cheers, Peter

@Alastair_Freebird 3 жыл бұрын

Hi! For the integrato G type I might only use 6 on a long ladder plinth (up to 2.4m long) just to quickly level it and then I would fill in the gaps with support blocks. With the very low profile type I might put them every 400mm ish if it seems harder to put other supports in between

@richardkeith2778 3 жыл бұрын

Congratulations on your 10k milestone. Quick cheeky off topic question if I may. My daughter lives in Sheffield, and is looking for someone to do a garage conversion. Do you have any contacts you can recommend. Thanks

@Alastair_Freebird 3 жыл бұрын

Richard Keith hi thanks, although it is only 10k not 100k yet! For general building and conversion works I can recommend Alan Lamb at Buildwiser on 07779 712646

@matttreerat8673 2 жыл бұрын

Love the channel and the vids, that it inspired me to make a big wardrobe (2 units together). It's 2.4m long, 2.2m high, 620cm deep. I have just made the plinth base with 8 of those adjustable feet from your vid above. The unit total weight is about 350 kg and the feet will be sitting on the floorboards. Should I use any sheet wood under the feet to distribute the weight load on the floor boards? Or just mount the 8 feet on the plinth so they align with the joists that are under the floorboards? Thanks in advance and keep up the good inspirational vids!

@Alastair_Freebird 2 жыл бұрын

Well now, I have actually moved away from using ladder plinths in favour of black plastic adjustable legs which remain accessible after setting the heavy carcasses in place. I had issues with slight settlement of ladder plinths once loaded. So your idea of lining up the feet with the joists is a good one if you are going to use this method!

@matttreerat8673 2 жыл бұрын

@@Alastair_Freebird The plinth went into position last night. Half of the feet were over the joists. Once levelled, I used your method of using L brackets to preload it and recheck the levels. Then 12 support blocks over the joists. Today the units are sitting quite nicely on the plinth. Thanks for your advice and vids.

@tombristowe846 3 жыл бұрын

I notice at the 4min 02 point that the bit of wood you've used to demonstrate the levellers is engineered. Do you use that a lot and is it freely available? Thanks.

@Alastair_Freebird 3 жыл бұрын

Tom Bristowe I get edge-laminated sheets of radiata pine (the one you saw) and oak, from a great little supplier called Optimum Timber Supplies in Mexborough

@Alastair_Freebird 3 жыл бұрын

kzfaq.info/get/bejne/l66YiZOSnrmxZKs.html

@tombristowe846 3 жыл бұрын

@@Alastair_Freebird Thanks very much for getting back to me with that. All the best.

@vitalygrom3788 3 жыл бұрын

Shame they don't come with cover caps. In case you want to level the carcass directly off the floor without any plinthth. Gonna end up with 30mm great holes in the bottom of the unit.