Extreme Fast Milling Machines in Action - Brother Mill 5 Axis Machining

Рет қаралды 320,527

2 жыл бұрын

Extreme Fast Milling Machines in Action - Brother Mill 5 Axis Machining
#cncmilling5axis, #cnc4axis, #machinist
Brother CNC Machines
website: machinetool.global.brother/en...
M200X3 machine: machinetool.global.brother/en...
S700X2 machine: machinetool.global.brother/en...
KZfaq: / brothermachinetools
Disclaimer: CAD/CAM SOLUTIONS is not affiliated with the businesses whose products are shown in this review. Any trademarks depicted are the property of their respective owners.
Please contact us to email address: uocnguyen.meec@gmail.com
Thanks for watching!

Пікірлер: 91

@smythie888 7 ай бұрын

I love the spin clean and dry sequence 👍

@rayp.454 4 ай бұрын

Brother has been making these speed demons for a long time. Nothing faster than a turret tool changer.

@benthurber5363 9 ай бұрын

"How fast can you get your cycle times?" Brother: "Yes."

@aerialcat1 7 ай бұрын

I really liked the ‘spin-dry’ cycle.

@Thoma5380 7 ай бұрын

I'm used to work in a machine shop but damn my heart almost broke at every close movement in simultaneous 5 axis approach.

@William97864 6 ай бұрын

The ATC is insanely fast, smooth toolpath and excellent programmer, job well done

@assassinlexx1993 6 ай бұрын

That trick of spinning the part to drain / flush. Is very clever. The dentist idea of rinses and spit.

@derekb4731 4 ай бұрын

I'm retired from an Aerospace company as an Inspector, I used to have to do F.A.I.R (First article Inspection report) on parts like this, an absolute nightmare until we could include the CNC program

@Beerbatter1962 7 ай бұрын

As Titan would say, "That's the sound of money right there!". The tool changer speed is most impressive.

@asakayosapro 7 ай бұрын

As long as it doesn’t turn into a *money shift* , we’re good

@Katchi_ 6 ай бұрын

Who?

@13anomalous16 Жыл бұрын

good lord I'm now realizing how slow our Brother runs in comparison to this video, at my shop, OP1 and OP2 would take a solid 20-30 min. Good to see that there is plenty of room to increase productivity with simple feeds and speeds, and width/depth of cut.

@adammiller4879 9 ай бұрын

Brothers are absolutely insane, we have them at our sister company but not where I work, I want to program one so bad😂

@feynthefallen 7 ай бұрын

Don't be too ambitious. At these speeds, a tiny imperfection in the material, the cutter or the program and you'e picking bits of end mill out of the walls. Slow and steady wins the race.

@adammiller4879 7 ай бұрын

@@feynthefallen not in production it doesn’t

@vzxvzvcxasd7109 7 ай бұрын

How, as a business have you not limit tested your machines?

@lincolnsawyer5076 6 ай бұрын

@@vzxvzvcxasd7109 lost of owners are scared to do "damage" by running them "fast", and they are used to the older slower machines so its all they know to program slow feeds and speeds. Our brother machines don't run as fast as this one but we run them pretty good, this video blew my mind though.

@Franklinguy759 3 ай бұрын

The Brother is cool, Also the dynamic tool paths. Yea I’m a cnc guy.

@shawng9541 4 ай бұрын

I could watch that tool change all day!

@staysheep800 3 ай бұрын

That tool change is insane

@r3Pbl4 6 ай бұрын

Отличная оптимизация, великолепная работа! 👏

@lordmado3918 7 ай бұрын

Damn this machine is clean

@viktorlukasevich4834 12 күн бұрын

super , bravo!

@Xezma 7 ай бұрын

Those step overs are crazy

@luckgrip252 4 ай бұрын

Not only stepovers, but plunge feeds also, for example - drilling and tapping.

@bazzingabomb 2 ай бұрын

This must be the Daddy not the Brother, laying down the law showing how it should be done.

@sferg9582 6 ай бұрын

Mouth agape, Eyes agog! Wow.

@AandHAutomationllc 8 ай бұрын

Amazing

@Convolutedtubules 2 жыл бұрын

So productive...

@corbbinrabus 2 ай бұрын

Torque wrench to break it loose, good ‘ol handle for second op. 😅

@orobinczaia5527 7 ай бұрын

Ooh wee! that would take me a long time on a manual!

@ronaldwitteman2134 2 ай бұрын

Brutal.

@user-tc9gh5np3c 3 ай бұрын

Огонь!

@thierryallain280 6 ай бұрын

je suis fraiseur tourneur ajusteur de métier et suis impressionné de la vitesse de ces fraiseuses numériques!!

@pimmelberger9967 7 ай бұрын

I had to put it on slow, won't my heart broke down😂❤

@hogtownhenry 7 ай бұрын

Poetry in motion.

@MagnetOnlyMotors 7 ай бұрын

Good thing they’re not in a hurry !😮

@arsehole420 6 ай бұрын

good programmer, i'm fixing slow programs every day, but nothing like this. that tap will snap eventually at those speeds.

@danny4368 2 жыл бұрын

Time is money :)

@leonschumann2361 7 ай бұрын

crazy chip to chip time

@IEA_455 7 ай бұрын

No fning way. Man it’s hard to believe this isn’t sped up

@metinevrensel Ай бұрын

how have you choosen spedd feed ae ap tool acording to part material.

@chrishill6276 7 ай бұрын

And the operator is wearing surgical mask in case he contaminates the coolant.🤣🤣

@santboiboi375 Ай бұрын

Como aceleran la cámara!!!! Es aluminio ???

@derbacksteinbacker4942 Жыл бұрын

... and remember, try to keep toolchanges to a minimum, they add time! that brother guy: cringe...

@sparfuchs6454 7 ай бұрын

at the GROB company in Germany we say it's sweet but not bad

@ch1lep4s1lla6 Ай бұрын

im recently trying to learn more about machines, can i ask what is that thing that goes out of the machine? sorry for my ignorance it looks like water but what is it?

@Island.dweller 7 ай бұрын

are you offering demo units? hehe

@lintelle2382 7 ай бұрын

not sure why I thought it looked so weird for the guy to get in there to change the part at such a slow speed. guess I was expecting Flash Gordon or something...

@tireballastserviceofflorid7771 7 ай бұрын

What kind of tolerance can be held at this speed? And how long do the lead screw last? Really impressive.

@CatNolara 7 ай бұрын

Might be direct drive, so no lead screw needed. No problem with aluminum, but not steel/cast iron since metal dust would clog the magnets of linear motors. Tolerances would indeed be interesting.

@tireballastserviceofflorid7771 7 ай бұрын

@CatNolara Linear motors in that capacity would be hard pressed to hold toleranceat that high of speed. As for metal in the mechanics that's not a problem. I used to open up mills half as big as a house that cut production cast iron to extreme tolerance making tiny needle sized chips. Never did we have chips get in anything. Billows and shielding are amazing things when properly installed and maintained.

@CatNolara 7 ай бұрын

@@tireballastserviceofflorid7771 I work in the manufacturing of cnc machines with linear motors daily, it's more common than you might think. Precision comes down to the quality of encoders and drivers, the linear motors can handle it with no problem.

@tireballastserviceofflorid7771 7 ай бұрын

@CatNolara I'm fully aware of how they work and their limitations. As well as whether or not, chips get inside critical areas.

@Skyisnotalimit 7 ай бұрын

Looks nice! I wish i could do that. I have got at my work most only welded parts, even given lets say 10 part of one sort, they are all in diffrent bends out of tolerance and need holy water and a bible to be good after machining.

@metinevrensel Ай бұрын

can you share with us these your part files for tutorial. thank you

@VinhNguyen-tr6ep 5 ай бұрын

How can u calculate the spindle speed and the F ???

@keegansimpson340 5 ай бұрын

Spindle Rpm = (SFM x 3.82) / tool diameter Feed Rate = RPM x Chip Load x Number of Teeth Chip Load = Feed Rate / (RPM x Flutes)

@Thro8LVibes 3 ай бұрын

Me watching at 2x 👽

@gwater12345 7 ай бұрын

Suppose I receive an order for 10K. How many days will it take to produce?

@castroorstad8215 7 ай бұрын

It is clear to see that the person who programmed the machine has not worked with the parts themselves afterwards. Thread holes are not countersunk afterwards, but before threading. kzfaq.info/get/bejne/f5-lacKitJjKn58.html

@johnmorack7619 7 ай бұрын

Amen to this comment..the program is meant for show. Its amazing to me how this impresses people still when we have been cutting chips like this since the 90's

@pavlosniarchos336 2 жыл бұрын

Zase aluminium. Proč všichni machrujou jen do hliníku?

@TheKeule33 Ай бұрын

That's not fast - that's normal speed

@johncardea837 3 ай бұрын

I was running jobs on linear motor machines 20 years ago 😂

@ballchrome1201 2 жыл бұрын

why so rush....😅😅

@mwip972 10 ай бұрын

because time is money

@NejMoss4873 5 ай бұрын

I was a tool maker years ago. Did a lot of machining. You have NO hope in making that part.

@Yourmomsplacefasuppa 4 ай бұрын

Speak for yourself

@oulinsaeteurn9078 Жыл бұрын

I could do all that in one operation. Not bad . Why would you chamfer those holes when you spot them already??Should at least add a probe for the second side. Never trust a movable stop.

@jonbaker3728 Жыл бұрын

I don't see a spot drill operation.

@mattlepird8241 7 ай бұрын

Curious how you would it in a single operation.

@NoBodzSvK 7 ай бұрын

@@mattlepird8241use a saw and cut it off from a side where is that half circle pocket

@mattlepird8241 7 ай бұрын

The saw is then a second operation....@@NoBodzSvK

@whtkngofc 7 ай бұрын

Spot drill? They used carbide drills, no need to spot. HSS too slow!

@HuskyMachining 7 ай бұрын

this is cool and all but damn would I pay a Buffalo nickel for some "boring" set up videos for a part like this with a brother VMC. I would watch an hour long video of someone's finger hovering 0.01mm above the red button while they send each op. It sounds boring but I'm thinking of what machine to buy next and those things matter.

@hermansugiharto7543 7 ай бұрын

❤🫶👍

@schmatzek1 Ай бұрын

Wieso eigentlich Endmill und nicht einfach Mill? Es heißt ja auf deutsch auch nicht Endfräser.🤷‍♂️

@richard63 Ай бұрын

That's only aluminium. You won't be going that fast with K110 or similar.

@Hanal503 2 жыл бұрын

For kids😂😂😂😂

@J1GS4W_13 6 ай бұрын

when i see videos cutting aluminum like this i just laugh. Cmon Hot shot do this with some tough steel not aluminum which can be cut with the tip of my fingernail Marone!!!

@RiseOfSky 6 ай бұрын

Come on hot shot make me this part faster.. there are machines built for heavy cuts in tough materials, there are machines made to be fast in soft materials.. oh and keep in mind you drastically loose torque at high spindle speeds, so seeing these hefty cuts at that speed is absolutely jaw dropping even in aluminum