No video
Crane Hook | Boundary blend | Surface modeling in Creo Parametric
Рет қаралды 32,991
3 жыл бұрынThis tutorial is about surface modeling in Creo Parametric. In this tutorial, you will learn how to create a crane hook using boundary blend in Creo Parametric. Boundary blend is a powerful tool for surface modeling. You will gain insight into creating the crane hook through surface modeling using boundary blend in Creo Parametric. So let's get started.
Join this channel to get access to perks:
/ @cadxtraining
Playlist:
• Part Design in Creo Pa...
• Complex part design in...
• Sheet metal tutorials ...
• Surfacing in Creo Para...
• Plastic Design in Creo...
• Assembly Design in Cre...
• Detailing the drawing ...
• Gear design in Creo Pa...
@CADxTraining #CADxTraining #CADx
/ @cadxtraining
/ cadxtraining
t.me/CADxTraining
@vickyoo5 3 жыл бұрын
Very informative I'm learning lot. Thanks in advance for the future videos
@edzak7257 5 ай бұрын
I, too, had trouble in getting the boundary blend to work using all 3 sketch references. To solve I did this: 1. Boundary Blend: Profile sketches #1 & #2 2. Fill both ends of blend from step 1 3. Merge blend & both fills, then Solidify 4. Create Revolve (Nose of hook) 5. Boundary Blend edge of revolve & center profile sketch 6. Merge blend from step 5 then Solidify 7. create last revolve, hole, cosmetic thread & chamfer Done!
@CADxTraining 5 ай бұрын
Good
@rafaelalmeidafioravanti4834 Жыл бұрын
Congratulations on the course. Thanks. I am learning a lot. Do you have a video on how to make a 3d drawing a 2d one with dimensions? Just like the drawings you use to draw.
@user-dy9ve8pr7p 4 ай бұрын
I like your videos😊
@Kaalathekaali 4 ай бұрын
Sir everything fine at last after boundary blend if i select tangent it shows error if its free its ok what to do?
@CADxTraining 4 ай бұрын
Change the file accuracy and try.
@swarajbiswas3056 3 жыл бұрын
Hello sir. Can crane hook be modelled with swept blend or blend ? I have tried several times, but goal is not accomplished .
@CADxTraining 3 жыл бұрын
No, it is not possible by swept blend are blend. You cannot maintain all the dimensions using swept blend. There are two guide curves in crane hook. If you use swept blend you can only maintain One guide curve.
@joseaidhernandezdominguez4233 4 ай бұрын
God, you're the best
@ROHITmq3rp Жыл бұрын
Best tutor.
@cherylveliganio6601 Жыл бұрын
I'm having difficulties with this but still its so helpful. I will redo it many times till i able to get it. I'm having difficulties with the datum plane
@CADxTraining Жыл бұрын
Change the file accuracy to 0.001 and try
@harikumark6371 3 жыл бұрын
Hello, I am getting error like "try adding curves between curves no.0 and No.1 in the first direction" while adding nodes in Boundary Blend, can u help me with that? @CADx
@CADxTraining 3 жыл бұрын
Your path and sketch section must be connected with each other to form the boundary blend. So create datum points on the path and take the reference of these datum points while creating the section. You will not get any error. Watch the video carefully to see all the steps followed.
@adityagodase1485 Жыл бұрын
Try by using two control points
@chezhianj8117 Жыл бұрын
How do you keep your drawing on left and sketching
@madhavabonam1019 Жыл бұрын
I find this tutorial was very helpful, but I am unable to form a boundary blend with the third section at the revolve. When I select the top and middle section(sketches), shape is generating, but when I click for the third section as profile of the revolve it's not showing any preview. Could you please help me out if I am making some mistake. I am getting some preview if I don't select the paths, but to get the required shape the blend is not generating with the paths.
@CADxTraining Жыл бұрын
Change your part accuracy first. Make it 0.01
@madhavabonam1019 Жыл бұрын
@@CADxTraining I tried changing the accuracy to 0.01, but it's not working yet.
@CADxTraining Жыл бұрын
Just give a last try. Change the accuracy to absolute and make it 0.0001
@madhavabonam1019 Жыл бұрын
@@CADxTraining It's still not working, I will start from scratch once again and will see if it works. either way thank you for the quick reply
@ranjubala5732 3 жыл бұрын
How to add auxiliary view arrows in creo?
@CADxTraining 3 жыл бұрын
Why you need that?
@ranjubala5732 3 жыл бұрын
@@CADxTraining For indication of direction of auxiliary view from parent view just like section arrows.
@CADxTraining 3 жыл бұрын
Create a symbol for import as a symbol to creo parametric
@manishshekhawat5529 2 жыл бұрын
HI Satyendra, I am trying the same way you showed here but my blend is failing in 2nd direction. what to do?
@CADxTraining 2 жыл бұрын
You need to increase the file accuracy I guess!
@manishshekhawat5529 2 жыл бұрын
@@CADxTraining may be. the blend is complete upto initial two sections but it is failing when i connect to revolve section.
@Rajesh360 3 жыл бұрын
in youtube less video available about creo
@sonuKumaryadav-ld7qz Жыл бұрын
Hello sir I'm unable to make it while I'm putting control points it's not giving results
@CADxTraining Жыл бұрын
Change the part accuracy. Make it .001 and try. If it works let me know.
@sonuKumaryadav-ld7qz Жыл бұрын
@@CADxTraining how can I change accuracy can you tell me please
@CADxTraining Жыл бұрын
I have already posted a video on KZfaq. Search for that.
@sonuKumaryadav-ld7qz Жыл бұрын
@@CADxTraining ok sir
@piyushpritam2567 2 жыл бұрын
How to do give dimention manually?
@CADxTraining 2 жыл бұрын
Look for dimension option. Or just right click and select the dimension option.
@ajayn4480 2 жыл бұрын
How could u mention M52 IN DRAWING and how could u show section 2 in drawing sir
@CADxTraining 2 жыл бұрын
Watch this to know more. kzfaq.info/get/bejne/e5d7gMh8s7TJfaM.html
@ajayn4480 2 жыл бұрын
@@CADxTraining sir one more doubt I saw almost all your sheetmetal videos. By viewing that I understand that two methods to make quilt one by making traingle extruded part and then using quilt form another one using revolve option and then quilt . While using quilt on revolve surface a deformation arrows are strangely located somewhere .I'm able to make quilt form How could correct that sir
@CADxTraining 2 жыл бұрын
I didn't get your question.
@ajayn4480 2 жыл бұрын
@@CADxTraining sir while using quilt form surface selected and mentioned with colour green but flip arrows are located somewhere on the object
@martinmartin4974 3 жыл бұрын
Can u post how to install creo?
@CADxTraining 3 жыл бұрын
You need to search in KZfaq. Already there are several videos available.
@martinmartin4974 3 жыл бұрын
Ok sir👍
@jamsteven9726 3 жыл бұрын
How can you put the pic on Model Tree? Thanks!
@CADxTraining 3 жыл бұрын
It's done by video editor. Not part of Creo.
@jamsteven9726 3 жыл бұрын
@@CADxTraining OK! got you, thanks so much!
@muniraj5395 Жыл бұрын
@@CADxTraining how could you please explain that
@user-rc5fy8nc5m 3 ай бұрын
I failed in the feature of boundary blend
@CADxTraining 3 ай бұрын
Change the file accuracy and try
@user-rc5fy8nc5m 3 ай бұрын
@@CADxTraining control point ， I used a broken point in the second sketch of direction 1. Successfully use the geometric points created in the sketch
@nikhilverma2796 2 жыл бұрын
How to solidify it
@CADxTraining 2 жыл бұрын
Watch the video at 21:50
@adityagodase1485 Жыл бұрын
hello sir,boundary blend feature fails after giving control points.
@CADxTraining Жыл бұрын
Increase the file accuracy and try
@adityagodase1485 Жыл бұрын
@@CADxTraining by taking two control points it is working, but is it correct ?
@CADxTraining Жыл бұрын
Modified the third control point according to the surface formed. After that you can select that point.
@adityagodase1485 Жыл бұрын
@@CADxTraining how to modify ?
@CADxTraining Жыл бұрын
Share your part to me. I will check. Which version of Creo parametric are you using? email2cadx@gmail.com
@sanjaynatarajan4906 2 жыл бұрын
you just read out the way you are doing, but you have to explain how the methodologies works!
@MSV7 Жыл бұрын
I haven't create boundary blend. Why?
@CADxTraining Жыл бұрын
You are asking yourself.
@MSV7 Жыл бұрын
@@CADxTraining how create boundary blend. I am many times try but not able to create hook.
@CADxTraining Жыл бұрын
What is the problem you are facing.
@MSV7 Жыл бұрын
@@CADxTraining I am follow your show in video 1st direction created but 2nd direction not created.
@MSV7 Жыл бұрын
@@CADxTraining kindly give me a your mail ID, I will attach my drawing.
@Rajesh360 3 жыл бұрын
plz upload creo video more
@denvalatkinson4617 Жыл бұрын
this doesn’t even work
@CADxTraining Жыл бұрын
Change the part accuracy. Make it .001 and try. If it works let me know.
@xxhimanshubakshixx Жыл бұрын
@@CADxTraining not working
Camden Bowen
Рет қаралды 1,2 МЛН