Went to my friends shop and it helped he had a stand to hold up the cross member to take out both bolts. Easy install. Great videos you guys put out to help with self install.

Installed this morning on my '23 TRD Off Road. Simple to do, tight and secure. No rattling. Great product. Did it in my garage using a 3 ton jack. Just slightly raised each side, one side at a time, for easier access.Tires didn't even come off the ground.

Just installed the shields on my own ‘23 TRD Pro. The one thing I did not hear mentioned in the video is that the replacement bolts and nuts are 9/16” and not metric. Perhaps this is a recent change in packaging. Other than that the install went smoothly, less than an hour to do both sides. Thanks for the super helpful guide!

When installing the rubber snubber using a small screwdriver, make certain to sterilise and sharpen the screwdriver so as to make a clean puncture wound in your hand. Bandaids are also recommended.

I installed it today on my 2018 5th gen 2WD. It fits perfect no rattling. I spoke with the Cali raised LED rep and they fixed the rattling on the driver side and provided longer security bolts.

Terrific easy to follow instructions, especially the 2 front bolts. I used a 6- inch C clamp to lower the back of the brace into position to install the 2 aft bolts after seating the front 2. This just eliminates the need to press, hold & attempt to catch a few threads.

Great vid. Thanks for the installation tips!

I like these instructions better. Camara work and instructions are great

I agree with many of the other comments. Excellent and very easy to understand instructions. The best visual installation video I’ve watched so far. Bravo Zulu 😊

Excellent installation video. I didn't realize this was only for 4WD V6 versions.

Just did this on my 22taco today. Easy peezie lemon squeezer. The cat shield is big time heavy duty.

Great video!.. I have a 16 4runner sr5 2wd.. can I install this too? Thank you so much

Thanks Yota

Hi, I could not find a shipping policy on your website. Do you offer international shipping (specifically to Toronto, in Canada?)

Good job 👏

So I just received my Cat shields, took me 2 hours to put them on but should have taken 1 hour because I ran into huge problems. First off the driver side is right up against the cat, once I got it in it was okay however the edge of the shield is on my traction line both on the driver and passenger side. I wish I could shear photos here. 2 hours of regretting my purchase it ended up great except for the fact that it’s on my traction lines. At least I think that’s what they are.

That South Park skit was hilarious. I spit up my beer. lol 😂

Do the outside bolts first on the trans mount.

What is the required torque for the security bolts and the 12mm bolts?

great video, clear and thoughtful! I want to ask about those four holes that the two short brackets fastened to the frame, are they nut-serts? is there a nut welded on the inside of the frame cavity? or those holes are just threaded "tunnels"? My 4runner's front sway bar mount hole was damaged due the the welded nut breaking off.

#caliraised why not burr the corners so customer’s don’t get cut from them, just another couple of minutes to grinding them/dull them down?

Great video but, aint it a shame we even have to do these types of things nowadays........

very cool. anyone know if it'll fit a 4th gen 4runner?

Bought them as soon they released them!! And since day 1 when I’m in reverse they make a rattle noise… now the rattle noise is constantly 😢

Went to install the shields on my 4runner and had a problem with the Security Hardware. It seems the bolts are not long enough so the threads don't catch no matter how much force I use pushing up. I tried the OEM bolts to see if there was a difference and the OEM bolts wouldn't even catch. There seems to be some thickness with the shield and the OEM brackets that is the problem. I have 2 choices...send longer bolts or I will have to return product, which I'd rather not do. Please advise.

Is it ok to use one of the security bolts at each end of the support members instead of both security bolts on the outer bolt connection?

Will these work with cbi skid plates? I know they say they work 99% of all aftermarket skids but with the cbi skids, those brakets are removed and not reinstalled.

is anyone experiencing a quickie noise when the frame flexes.?? anyone?

Is there a wait time or are they ready to ship?

What would prevent a thief from just ordering one of these kits for a couple hundred bucks and then they will have the "special" tool. How long would it take to cut that off with a cordless angle grinder?

Do you anticipate a 2WD probuct?

The torque spec is brrrrrrrtt.

Would this fit an FJ cruiser

I threw these on my 4Runner and there’s a groaning noise at low speed. Any ideas as to what that could be?

Do these fit on 2007 4Runner

My car started vibrating and rattling at around 400 RPM when the car is on Drive, stopped, and AC turns on. I believe it’s due to the cat touching the shield. Is there any one else with the same problem? How do we create clearance so the car wouldn’t vibrate and give rattling sound? Thank you.

I have the same problem, rattles and shakes the whole car

Any issues with 2023 models with KDSS?

Just installed mine. Does it matter that the driver side is touching the cat?

Is doable without the lift? if so is it hard? Thanks in advance!

What’s the name of that front bumper? Where to buy?

Where did you get eh tail lights?

Do i need a lift or in my garage doable?

Miller cat protector is better.

I just installed mine on a 2023 ORP. The passenger side is fine but I notice on the driver side, where the CAT has a heat shield and it has a clearing problem. It fitted but leave no gap between the heat shield and the CAT shield. They touched. I notice some vibration when driving. Do you have similar issue or am I installing it properly? Any recommendations? On a side note, Isn’t it weird there’s no heat shield on passenger side but only the drivers side? Thanks

ONLY for 4wd. They don't seem interested in 2wd.

Folks ! When installing on the Tacoma leave the spacers out and also use stock bolts that hold transmission cross mount. Cali has this change out because the security bolt hole does not line up if spacers used. Yes, Tacoma kit the same as the one install here.