8:30 in the video I hope no one ever goes through what I have been through the last 4 months. I finally crashed my bike after 5 years of riding a motorized bicycle. It was because of me losing sight of the fun of just riding and just chasing power. I got my first ride to the hospital in an ambulance and got my first surgery 2 months later. The most intense pain of my life period. 3 fractures and 3 torn tendons will do that. I will be in recovery for a while. It did a massive power wheelie 98.5cc shift kit bike and bucked me off landing on my left knee. Please be careful anyone reading this lol don't be like me😅

You do good work. My building days are about over. My Arms are weak. Ebikes are my mode of transportation now. Still ride my 4 stroke Schwinn. Be 68 his month.

Small 2 bangers are a bug of their own! Once you catch it you can't shake it!

Thanks again for your time and work

I'd love to see a V-twin kit for bicycles at some point, just for fun.

Very cool, I have same questions that lead you to get this cylinder just cause I’m curious myself how my work stacks up too. Nice vid, thanks for post.

Very cool review. My favorite company 5-6 years now, every one I build sells in a week and it’s been a couple dozen now.

Thanks for ANOTHER GREAT video 😁

Just went on 1st ride of the summer with a $100 old kit I had laying ard and man going to that from the phantom what a big difference lol

Thanks for the informative video 😊

GRET to see a two stroke video once again... I started to lose hope...!!!!

i have 3 california wildcat motors they are dependable many many miles on them they take a beating but i like em. cheers

Excellent vid bud. I like how you compared your port work to the "pros" port work.

Bro it's a beauty I'm working on mine now 🙂🕊️

Love the content man keep up the amazing work. I'm also from Louisiana we should meet up and go on a ride if u like.

In this video I seen I guess an excerpt of an older video which I've been looking for where you had the sandpaper on the glass table and was fixing the squish Gap issue you were having with that cylinder and head what video was that I can't seem to find it I have a brand-new zeta Firestorm 80 that I've had for months and the only thing holding me up is figuring out what grit sandpaper do I need to use to get to squish Gap right if you can help me out with that information it will be greatly appreciated and by the way I love your channel man I've learned so much from watching your channel over the last two years I was thinking about taking it to a machine shop but don't really want to have to pay that cost which is going to be probably 50 bucks or better

Cool bike man , love your videos ❤

I haven't seen one of your vids, in a little bit. Does it feel much better having a little bit of suspension (as apposed to the Cranbrook forks)!? Also, I've heard big complaints about the clutch levers from the CMB kits? Would it be easy to swap the clutch lever out for a better/pin style one?

How do these bikes do up hills? I live in a mountainus area, and im wondering if they are any use to me

Nice video... thanks for the info...IV actually looked at those before....are you going to be running the new BT 100V2 engine that just came out with the reed valve set in the cylinder like the minerelli

Need help with my f zero n having trouble lining up the chain

I'm also using the same cylinder from California motor bikes. Im on a 40mm stroke bottom end also. So rtv the base and head? I was wondering about this. I'm going to give this a try. Thanks for the awesome videos man!

Hey hover can you do a video on running only one piston ring and what you think about it and also have you ever gotten a cylinder off Amazon that you just can’t use it’s garbage

What made you choose a Maxxis Hookworm on the front with a Serfas Drifter in the back? Was it tire clearance or grip vs durability? I can see the Maxxis Hookworm fills the front fork to the max, and no bigger tire can fit. Did you choose a Serfas Drifter out back because the Hookworm at 2.5" didn't fit the rear (my Hookworms are bigger than 26"x2.5" with a wide rim), or was it the tires you had available and chose the one with better grip up front? If the latter, good choice. I think the Maxxis Hookworm is the best track bicycle tire for a motorized bike. Just so you know, they make em skinnier and in smaller tire sizes. The 24" Hookworm is a lil over 25" inflated on a 50mm rim, nearly a normal 26"x2.125" inflated height.

Hey there, Ive been following you for a number of years back when I was flying drones all the time. Im homeschooling my young kids ages 8 and 11 and was thinking of refurbishing a moto bike as a sort of small engine repair class this coming year. However looking at your viedos, maybe it might be more interesting and knowledgeable to build a bike like yours so we can all learn together how motors work. Do you have any suggestions on where to start looking for a project or any other you tube videos that might follow a build from start to finish?

Can you test running some cheap cilinder on motor oil or vegteble oil

Did you break those in before doing your tests, or just send em? I was cringing a little bit at full throttle on a new engine cylinder. Whoops, I spoke too soon. You said they were new when you tested later in the vid.

Have you seen the new Zeda max 100 and are you going to buy one

i recently purchased the zeda firestorm 80 kit but i don't really know what frame to put it on I'm a big guy 6''4 240lbs,and I honestly like the frame in this video do you mind telling me where its from. this one looks like it'll hold me lol. I'm a first time builder but I'm looking to get into the hobby and looking forward to upgrading

I've got a question bro, I've got a yd100 build and it ran flawlessly but recently it just bogs even when fully warmed up, is it clogged jets or a different issue?

Once again, how are the wheel sets holding up? What about the other performance/upgrade parts you've used on this bike? Has anything actually failed?

Hey I’m looking at the eBay kits and just wondering is it a clutch handle? Like a manually operated clutch? Also, are those eBay kits reliable?

What is a good off road frame/bike. for a morterized bike

Been meaning to ask you but kept forgetting. What kind of mirror is that? I noticed it doesn't vibrate very much as mine does.

Would a tomos exhaust make it quiet? If I welded a new adapter

LA do you help people with parks

Do you have to use the read valve with the third transfer

What did you put it on ? A pk80 bottom end ?

🎉 it's the real thing 🎉

Mint

But did you order one of the minarellis from them?

As fast as you are going, fill the lane. Do not ride the side like a bicycle, people will treat you like one. All the debris is in the bicycle lane too, why would you want to ride in that? You go fast enough to take a lane. Ride near the center stripe at all times. You can take the lane, own it.

😛

When you ride a 2 stroke you never lose the motor love 💗 more power but not a junk motorcycle moped/bicycle for life lol 😂

It's been a number of weeks when you installed the bullet train on one of your bikes. Have you had enough time to form a more detailed opinion?

10:57

Needs a better pipe

about time you ride a real bike :P

That's why I went electric. 25mph is about as fast as I want to go on Chinese bike hardware and it's legal here. A gas bike might be more fun but, I'm getting too old to evade the police.

I'm a 4 stroke guy, don't hate me :P

First?