Got the 21 degree the day it came out and love it. Went through 3000 nails so far no problem. It's a beast. But I would use better batteries.

I love mine. Ty for the video. I own lots of ryobi

Bro nail gun 101!!!!! Never have your hand that close to your receiving wood ( when you were nailing the boards up right)

The two-nail mode are sequential mode (single fire) and bump mode (rapid continuous fire upon bumping) I have Ryobi pin, Brad, and finish nail guns so I may give their framing nail gun a try. Although I have several pneumatic farming nail guns, I don't have a cordless framing nail gun. But I am formular with the Ryobi AirStrike technology from my Ryobi AirStrik finish nailer. So, I'll give it a go, great review, thanks.

Just a heads up, for the ryobi "HP+" tools such as this one, you're supposed to use an "HP" battery. They have a couple extra contacts on them, and they apparently unlock extra performance from the HP+ tools. Though frankly I'm not sure exactly what that might be. Maybe some sort of fancy battery management? (since there's the two extra battery contacts). The HP batteries work with all other ryobi tools though. Also the 2ah battery you had will technically work, it will just be even slower to recharge the internal air cylinder (that is used for firing)

It's about time Ryobi!!😊❤

Definitely picking up up for an impending project. Never used anything like it other that a staple gun. I have lots of Ryobi tools. Looks like a decent tool.

was trying to decide on 21 deg or 30 deg and you helped me go with 30 deg,good vid just watch the hands i was cringing on that smaller wood. stay frosty and head on a swivel.

Great vid dude, keep these up 👏🏻

That’s going to make things a lot easier for you brother.

Man you guys got some good looking lumber where you’re at. Wish I could buy lumber here that was half as nice

That an HP tool and you are using the Ryobi batteries that are not HP. So you are not getting the tools full power

I have been waiting for one of these to come out for years.

That’s a win for me, I’ve had a dewalt the recoil and fan noise was too much , and with a paslode buying gas ammo was getting expensive if you doit professionally

Good review. Kinda from the practical, non-commercial use point-of-view.

Excellent video! Been wanting to try the nailer myself. Quick question. What camera do you use for filming? You have great video quality! Love it!

Building off what @mattw4211 said, that 750 nails per charge is for the 4.0 HP battery. The battery you got is not the HP battery. So, you should still get quite a few nails with one charge, but it would likely be less than the 750 nails.

So what's the purpose of the 21 vs the 30 degree nails? Is there any benefit from one to the other? I notice you got the 30 degree one.

Any battery nailer should be oiled properly. Oil striker rails and then turn gun upside down and oil down striker until you saturate striker pump. The gun will run all day when lubricated, also don’t buy cheap nail of any size.

If you read the manual you will have to top that gun off with air eventually but It should go through a couple 100 nails but I'm not for sure what it came from the factory I know mine does. The one I have is a rigid frame nailer but it's the looks identical to that 1. They Probably came out the same factory just use different plastic. When looking at the nailer itself where you have to take a plastic plate off it's in front of the magazine that little indention like it's Hiding something that's what you're looking for you've got to take that plastic. Off and it will reveal a nozzle. You can attach an air hose to it. It does come with an Allen wrench. It's probably hidden around the magazine that's where mine was good luck.

Good thing about screws is when you make a mistake you can remake it easier lol

Can u use it to nail hardy cement board siding ?

bump fire multi shot.

Great info nice to know. Question i also bought a 30 Ryobi frame nailer gun for the first time. Can i buy 21 degree nail and put it in my 30 degree nail gun. Yes or no please let me know. Thank you

Bro its called rapid fire and thats your dept guage depending on how deep you want to set the nail

thanks helped alot

keep your hand further back when nailing connections or you will have a nail in your finger

Until you skewer your hand😂

Once you get a nail in your finger you’ll know better to hold your hand back far enough with without even thinking about it. 🤫🤣

You don't need that many nails just to demonstrate lol

Watch your hand when you're doing that. You had it a little too close to where those nails were going in.

Man your hands are way to close for comfort on those studs there bud

"A couple of nails didn't seat quite as deep as the others...." Let me translate that, it means you're pulling out your hammer. Fail.

I’ve got second hand embarrassment for this guy

When one of the battery breaks return them to h.d. get the 3 pack battery. Can get the brad nailer. Return the nailer buy another kit. Keep the brad nailer or return it again. Can get a 6 piece for 200. Full kit plus nailer for under 240