That's what i was thinking😂😂

They made it complicated on purpose, to make money off of people spending 300 dollars to get their glass replaced.

Según q se puede pero necesita las herramientas adecuadas y las máquinas. Y la experiencias. Felicidades excelente trabajado.

@@srmonit He even made it easier, means he skips some of things you could straggled, like how he removed the battery.. . it isn't how he removed it here easily, . i did mine like this. Just want Thanks him

here is the screen i found: www.amazon.com/gp/product/B089YJ6G96/ref=ox_sc_act_title_2?smid=A3MTGM3JLL6808&psc=1

at least $150 but if the screen breaks you have to pay for a Full new Display.

120$ now cost jus update

@@cambofixing where abouts are u located

Do u do mail-in repairs

I was actually thinking to replace my s10plus glass, then i saw this video. Nevermind😅

80

90 to 94 c

Kya price Mein glass change hua tha mere bhai

yes can

Please tell me your address

You dont. This is a fake glass

Or you can buy a used phone where glass in intacg but not the display

٢ثع٥

s

Ll

안녕

Reason they use specialized ovens or heating plates is to get an even temperature all over the glass where the glue is and so that they can set a specific temp so that it doesnt get so hot that it can break other components on the phone because of the heat. If you do this using a hair dryer or heat gun you just got to make sure you spread the heat around evenly and touch the phone sometimes to check that it doesnt get to hot. And as you start to remove sections of the glass where the glue is more softened up, stick thin things inbetween the glass and the phone that can be temporarily jammed there so that when you keep trying to get different parts loose, the previous work is still intact. And if the glue isnt loose enough and gives you a hard time removing different spots, then take the hairdryer/heat gun and heat up the specific area as to where the glue is still stuck. Its tidious work but not hard, just got to stay patience and it will com off fairy easy. NB: just spread the heat out evenl from a small distance away from the phone while also pointing it towards the edge of the glass where the glue is, so that the glue slowly stops working and thereby you can get an small suction cup that you can place on the glass you are trying to remove so that you have upwards pressure from glass/glue that you are trying toReason they use specialized ovens or heating plates is to get an even temperature all over the glass where the glue is and so that they can set a specific temp so that it doesnt get so hot that it can break other components on the phone because of the heat. If you do this using a hair dryer or heat gun you just got to make sure you spread the heat around evenly and touch the phone sometimes to check that it doesnt get to hot. And as you start to remove sections of the glass where the glue is more softened up, stick thin things inbetween the glass and the phone that can be temporarily jammed there so that when you keep trying to get different parts loose, the previous work is still intact. And if the glue isnt loose enough and gives you a hard time removing different spots, then take the hairdryer/heat gun and heat up the specific area as to where the glue is still stuck. Its tidious work but not hard, just got to stay patience and it will com off fairy easy. NB: just spread the heat out evenly from a small distance separeted from the glass on phone, the area you want to be focusing the heat on is around the edge of the glass, it is under the glass edge that you will find the glue/tape that holds them together. Now, having an suctiun cup to put on the glass will gives you some leveredge, because as you are lifting/light force with the suction cup, it will help the whole glass loosening in the areas where you heated properly and made the glue looses its job. And have guitarpicks/thinmetal or other items that will help pry bigger gap between the glass and the phone, they wiil be handy when the suction cup pulls up and reveal where you can start using exm. Guitarpick to pin inbetween gaps that came from upwards stress that is fixed with.a suction cup that can lift the entire glass. So all you gotta do as the glass comes slowly up, then all you got to do is slowly drag a pick, sharp thin knife or other examples you can find to cut away the glue that is between the phone and glass as the suction cup lifts it up and shows the gaps that wiil show itself, and that where you start slicing into the glue. Its an really easy job, dont stress it or overthink it, if you follow these advices you should be easily able to do that. And dont try to force the glass off, it will only lead to tention and stress which will result in a broken glass. just take your time and if it gets harder to loosen as you go then just apply heat gently to that spefic spot and around it and then keep going getting the rest lose. Its mainly rinse and repeat😉😊

...Help as to save money:)

isopropyl alcohol

Thank you so much

How much bro

If your touchscreen is broken you have to replace the whole display unit. Pro: the repair is way easier, Con: a display is just short of 250€ on eBay.