Freegaokdde I As drunk 7Stretch Fy ch

The best setting for the widest range of activities and lighting conditions is "Intelligent Auto" which optimizes the camera settings to the recording environment you are in.. Pressing the "Intelligent Auto" button will change the Recording Mode. Please consult the Panasonic HVC-720 operation manual for more details: service.us.panasonic.com/OPERMANPDF/HCV720.PDF Please contact us via e-mail if you have additional questions: askbh@bandh.com>Mark

If you run into any problems using this product, follow the steps below: 1. Check the items under “Troubleshooting,” and inspect this product. 2. Disconnect the power source, attach the power source again after about 1 minute, and turn this product on. 3. Perform [Initialize]. If you select [Initialize], all settings, including the clock setting, are reset. 4. Contact your Sony dealer or local authorized Sony service facility. Also, change the memory card and make sure there is adequate light for a less grainy/noisy result. The Intelligent Auto setting should be ideal for most shooting situations. >Mark

The best thing to do is experiment with different settings. To test shoots where you try the various settings and see what works best. You could also start in a fully automatic mode and as you get more comfortable with the camera try the various manual settings. Thanks! -Joey P

Thank you for watching.

That camcorder has a 37mm filter thread. You can use a wide angel adapter like this one from Raynox. bhpho.to/3dtrLf0 Thanks! -Joey P

@@BandH thanks a bunch!!! Subscribed :)

Depending upon your camcorder model, you may want use a remote control. Please contact us via e-mail if you have additional questions: AskBH@BandH.com >Mark

I am sorry, but if the camera does not have a way to change the language within the camera there is not going to be any software which will make that possible. Thanks! - Joey P

You do not have to be locked to this "rule of thumb" ratio. Your particular camcorder may not offer full manual adjustment anyway. You may want to try a neutral density (ND) filter. Consumer grade camcorders are typically designed t work most easily at their auto settings. Often the manual settings are tedious or tricky to maintain. Please e-mail us if you have additional questions: askbh@bandh.com >Mark

White Balance mode is accessed from the Touch Screen: White Balance: Automatic White Balance function may not reproduce natural colours depending on the scenes or lighting conditions. If so, you can adjust the White Balance manually. ≥ Switch to Manual Mode. (page 63):See the manual, pages 63/64 and 145: bit.ly/38YX4hf >Mark

Let us know via e-mail the brand and camera model and your B&H order number. Please contact us via e-mail if you have additional questions: askbh@bandh.com. Mark S.

+jack murphy - There could be exposure, mode, or control settings that should be adjusted or reset. Please send us an e-mail detailing the issue along with the brand and model number of your camera. Please send to: AskBH@BandH.com. >Mark

Your camera most resembles the Canon HFM50 Mia highlights in the video. See page 168 of the owner's manual 1. Manually set the white balance to suit the conditions. 2. Control the light by using the different exposure settings. 3. Control the shuter speed. 4. Use reflectors or other light sources to add light. 5. Use the IS setting on the camera for a stable image 6. Use a tripod or other dolid, stable support 7. Make sure the lens is free of dust. See page 168 of the owner's manual: static.bhphotovideo.com/lit_files/45018.pdf Please contact us via e-mail if you have additional questions: askbh@bandh.com.>Mark

Just go to iMovie or DaVinci resolve and mute the clip.

+Shannda Panda lease consult the SONY Owner's Guide for detailed recording instructions: static.bhphotovideo.com/lit_files/45541.pdf Please contact us via e-mail if you have additional questions: askbh@bandh.com >Mark

+hasan hussain I would recommend sending and email to askbh@bhphoto.com. Please let us know the exact model of Panasonic camcorder as well the model of the TV you are using. Once we have this information we would be better able to assist, thanks. *Andrea

All lenses will have a minimum focusing distance. You may simply be too close to your subject. >Mark

We are sorry to hear of any issues you are facing. Feel free to email us directly at ask@bandh.com so we can better assist you. Thanks! -Joey P.

Hi Joseph, depending on the camera you are using, the settings vary. For smaller camcorders like this, you will have aperture or sometimes it's called iris control. At night you're going to need as much light going to the camera's sensor as possible. So, typically you would make your aperture or iris wider (the number is smaller f2.8, f2 etc) to let in more light at night. Sometimes, cameras like these will have gain control that will let you boost the image for low light shooting. But be careful, this can introduce noise or grain into your video image. If you are shooting with a DLSR or mirrorless camera, using a combination of wider apertures (depending on what lens you are using.) and boosting the ISO will do it. The trick is finding an image that has an acceptable exposure or look. Certain DLSR or mirrorless cameras have tools like waveforms or histograms to help with exposure.

hi there is no iso on my camcorder just iris control and shooting at night that happens

Hi Joseph, send us an email at: askbh@bandh.com and we can further assist you. Thanks!

Understood. The camera may be emitting motor/lens noises as it focuses. You may want to consider having it serviced. >Mark

Please e-mail us: askbh@bandh.com >Mark

@@BandH ok, thanks.

I don't see why not. Since you have that camcorder already shoot some content with it, edit it and load it to KZfaq to see the results. Panasonic camcorders are very nice in general, even the older models. Thanks! -Joey P

@@BandH it doesn't work that good!!!! Search Wahib Khan and watch how to make a bouncy egg !!! It is shit! I got a Canon DSLR to vlog with..

Possibly. Please e-mail us your camcorder brand and model number. We will be happy to research this for you. >Mark

+moo obrien Footage from the Veho VCC-005 MUVI HD NPNG Action Camcorder (bhpho.to/1UXOS1T) is both Mac and Windows compatible. You will need editing software compatible with High Definition MPEG AVC/H.264 1920 x 1080p /30 fps files. Adobe Premiere Elements 14 (DVD) B&H # ADPE14WM - bhpho.to/1MUQcQ5 Mark S

+mychemicalticcitobyatthedisco - See the owner's manual: bit.ly/1pbnxPT You can erase your recordings one by one or all at once. • Press the [MODE] button to select the playback mode.• Select the video or photo thumbnail view. 1) Press the [MENU] button [Control(Left/Right)] button Delete. 2) Select an option by pressing the [Control (Up/Down)] button, and then press the [Control (OK)] button. 3) If you selected Select Files, image thumbnails appear. Use the [Control (Up/Down/Left/Right)] button to move to the photo or video you want to delete. Press the [Control (OK)] button to mark images for deletion. The garbage can icon appears on the photo or video. Repeat Steps and for each photo or video you want to delete. Press the [MENU] button to delete the photos and videos you selected. The message corresponding to the selected option appears. Use the [Control (Left/Right)] button to select Yes, and then press the [Control (OK)] button. 4) If you selected All Files, the message corresponding to the selected option appears. Use the [Control (Left/Right)] button to select Yes, and then press the [Control (OK)] button. • Deleted images cannot be recovered. • Do not remove the power adaptor or memory card while deleting files, otherwise the storage media may be damaged. • You can also delete your recordings in single view.• To protect important images from accidental deletion, activate image protection. • Protected images cannot be deleted. To delete a protected image, cancel the protect function first. • If the write protection tab on a memory card is set to lock, you cannot delete. • You can also format the storage media to delete all the images at once. Be aware that all files and data including protected files will be erased. • The Delete function does not operate if the battery charge is insufficient. We recommend you use the power adapter to avoid power-loss while deleting. >Mark

B and H Ty!

Please send us an email to askbh@bhphoto.com. Let us know the brand and model of the camcorder you are using so that we would be better able to assist. *Andrea

Depending upon the camera: Checking a memory card's available space or used space Press the [MENU] button. Touch [ Recording Setup ] -> [Available Space in Memory]. Check the available space. Displays a screen where you can check the total space available on the SD card and the SD card's speed class. >Mark