But it's still America. Focus on the video purpose instead

thanks, i've left them the way they are in this video, and so far so good. nothing is melting or burning.

because you bought cheap lights, good quality ones come with that electrical thing.

@@94SexyStang Yeah I appreciate the feedback. I ended up sending them back not because I had any issues but, before I even installed the first light the housing was pretty lose and the other was tight. But, thanks though

Dang I have an 09 Camry and was hoping these would work

Hi, this is high beam/DRL video. Hope that helps.

Can you take some photos of your factory H7 headlight housing socket and plug to send me for a look? Because there are some different adapters for H7

Did you installed after-market headlight assembly? For 2015 Camry, the OEM headlight high beam is 9005, low beam is H11. You need to take photos of your original clip to have a look, I can check it for you

canonlybeme4life I was the exact same car and issue

Less heat and last longer

Less issues HID are annoying and expensive man but not going to lie HID has the best white color no LED can match it I been on the look for bright white LED for my Camry because I love the white HID I have in my Escalade

There is no flickering after install LED bulbs on low beam

Unless you have a Hybrid, most headlights shut off while engine is cranking.

no

Can they be installed in a closed headlight fixture with no ventilation?

Amaraaa PUBGKillaa Yes they will fit perfectly my friend because I have the same car you have which is 2011 Toyota Camry and they fit exactly 100% Remember that if you are shopping from online like amazon or eBay which is you will save money instead buy them from the places that selling parts like auto zone and the other anyway back what I want to tell you if you shopped like I said from eBay or amazon and specially eBay is cheapest prices but when you shopping parts for your car they usually ask you about your model and make all the car info and they usually tell you if it will fit or not

I turned mine a little bit (maybe half turn compared to the stock bulb). The bulbs are a bit more snug than the stock bulb, but so far so good.

thank you, now i know.

What do you drive? Probably need to disable the drl.

All LED’s flicker when not at full power, they cannot be “dimmed” like halogen, so they pulse. OEM just does a better job at hiding the flicker

Have the same issue but I just don’t run the DLR anymore

Yes I did turn a little bit to keep it in place. The bulbs are a bit more snug than the original, but so far so good.

Angel Luna still run strong

@@randomreviews7210 better than morimoto??

You can, no problem at all.

I suggest you can dig a hole in the dust cover, that the led bulb can through it. The cooling fan get big space for heat dissipation

here is the link: www.ebay.com/itm/282316565987 hope that helps

www.amazon.com/Headlight-Bulbs-Conversion-Chips-12000LM/dp/B088NT5M9S/ref=sr_1_4_sspa?dchild=1&keywords=LASFIT+LS+Series+H11%2FH9%2FH8%2FH16+LED+Headlight&qid=1600264676&sr=8-4-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzU0VRNFBSN1EwOUxMJmVuY3J5cHRlZElkPUEwODkyNzY4MjhZUUhQQVNCMFhXVSZlbmNyeXB0ZWRBZElkPUEwNzYyNDQwWFNHNUk1VTNIUUJGJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

just open up your front light bulb and check for the model type of knob..for example like this 2014 - 2017 Camry series is H11 for low light and 9005 for high. just look at typed and u will find the right one for your camry 07

The exact same measurments apply for a 2007 Camry LE 2.4, I have the same car and they insalled

LASFIT Auto Lighting thanks for the information.

Rumer1 aftermarket dust covers that have vents

I have a 2017 Camry too and I keep my headlights on auto and at night they always automatically go to high beams in not changing the drl

haha so far so good, but we can only hope that it is legal...

R. Cooper to funny