Can Am X3 Rear Window Installation

Рет қаралды 17,739

Жыл бұрын

In this video I show you how to install a rear windscreen on your Can-Am Maverick X3.
Lately it has been really driving me nuts having dust and heat constantly building up in the front dash area from the vacuum created by the front windshield and having a roof. Adding a rear windscreen is quick and inexpensive way to block out the extra dust and heat while also protecting the passengers in the backseat from debris coming in through the back of the cab. Or if you have a two seater, protecting yourself from having crap hitting you in the back of the head.
Kemimoto was nice enough to send me a rear windscreen to show how simple it is to install and add some extra protection on your Maverick X3.
Link for the windshield I used : www.amazon.com/dp/B08KW9833T?...
Save a few Bucks Use Coupon: HCKC58MH 10% on one or 15% on two.
Kemimoto back windshield can cut the dust down by 80%, reduce the noise, keep the cold wind out of the cab in winter, and add protection from debris.
Made of Polycarbonate , which is 250 times stronger than glass.
Follow me On Instagram / mohawkdave555
My Amazon store: www.amazon.com/shop/mohawkdav...
Linktree: linktr.ee/MohawkDaveOffRoad555
Sponsors, Affiliates, And Promo Codes
---------------------------------------
67 Deigns Made In USA Device Mounts- 67d.com/mohawkdave
Diode Dynamics- www.diodedynamics.com/
PRP Seats- www.prpseats.com/

Пікірлер: 32

@kooncat9552 7 ай бұрын

Now you get to fill in all the huge gaps in between the fire wall and the insides, that's where i get the most dust coming in at,,from the back tires

@alainbrouillette7740 Жыл бұрын

I love your front light bar , where did you get it ? And the mount ?

@bigmaccampos509 2 ай бұрын

Im wondering if this will affect with the dust particle seperater at all?? Also the cooling system??

@CaliStang66 Жыл бұрын

Front light bar mount how could I purchase a set?

@billjilbert1607 Жыл бұрын

Did it help with the dust in the cab? I’m think about buying the Bent Metal windshield but the more people I talk to about it the more hesitant I get. Fantastic window from what I hear but I’ve hear with the rear window the heat in the cab even with vents open and no side windows is miserable when hot out. Also they say with a front and rear window the dust still seems to swirl in the cab from the side windows. What are your thoughts?

@michaelwaterstripe4648 Жыл бұрын

It would make more sense to add some kind of spoiler that breaks the vacuum and adds to cabin cooling

@eltigrepeleador 11 ай бұрын

Where did you buy fro t windshield ?

@lifesmemories7868 Жыл бұрын

Did it cut down on the cab noise?

@janeg5869 4 ай бұрын

What did you do with the speakers?

@buggiesandboars 6 ай бұрын

Now you have little to zero air flow over your intercooler. I see the maverick R has a roof scope to combat this issue, but what do you do for the x3? It could be a pretty big drop in performance with much higher intake temps.

@MohawkDaveOffRoad 6 ай бұрын

Maybe 🤔 I should fabricate a scoop.

@dnice6699 11 ай бұрын

I have speaker pods and particle separator. I didn't see you put the pods back on, did you?

@MohawkDaveOffRoad 10 ай бұрын

Yes I did, I cut the rear windshield.

@MAL-zf7yh Жыл бұрын

I have the exact same setup and the exhaust fumes make it unbearable to drive. Do you have this issue?

@MohawkDaveOffRoad Жыл бұрын

I did , so far the rear glass seems to be helping. Honestly any rear glass should help. Easy way to try is to use some cardboard in the back and see if it helps.

@CaliStang66 Жыл бұрын

How did you mount the chase light? Do you have a video mounting it?

@MohawkDaveOffRoad Жыл бұрын

Chase light comes with long channel bolts that mount to existing holes in the roll cage. I just drilled 2 small holes in the windscreen.

@CaliStang66 Жыл бұрын

@@MohawkDaveOffRoad thank you for the help was going to order that light bar after watching you’re previous video about it

@allenelkins628 Жыл бұрын

What about your speakers

@MohawkDaveOffRoad Жыл бұрын

I am still trying to figure out what I will do. I’m actually considering cutting the windscreen to allow the speakers to go back in the same place.

@marcusroberts6756 10 ай бұрын

Did you notice a difference with dust and heat after installing?

@MohawkDaveOffRoad 10 ай бұрын

Yes, it does help.

@Redeemed7 9 ай бұрын

What did you do with speakers?

@MohawkDaveOffRoad 9 ай бұрын

I actually cut holes for the speakers in the wind screen and mounted them exactly where it was mounted before.

@nublife1814 Жыл бұрын

Who makes the roof?

@MohawkDaveOffRoad Жыл бұрын

AFX. I would not recommend it.

@armandobriones5991 Жыл бұрын

@@MohawkDaveOffRoad I just got my windshield from Bent Metal. And I was looking into AFX. Is there a reason you don’t recommend their roof.

@StarknightMT_official Жыл бұрын

Hello, Are you interested in testing products? We would like to invite you to test the X3 Electric Device Table Holder for your Can-Am Maverick X3.

@Redeemed7 9 ай бұрын

I'm a new can am owner and am presently upgrading most everything. Just installed your starknight windshield. I'm interested in testing your accessories

@StarknightMT_official 9 ай бұрын

Thank you very much. We currently have no new products that need to be tested, and we can cooperate if needed in the future.@@Redeemed7

@thelifeoffastony1157 Жыл бұрын

Windshields are stupid....

@lucky13sxs Жыл бұрын

Should have gone with spike powersports rear windshield. Kemi motos rear windshield is terrible. At least with spike its molded and belt to proper profile, and has an adjustable vent for the intercooler.