No video

Can rebuilding my E36's entire cooling system fix this mystery noise?

  Рет қаралды 3,068

Logan Taylor

Logan Taylor

Күн бұрын

In today's installment of the e36 build series, I attempt to fix a mysterious rattle / squeak on my e36 convertible. e36s, e46s, and even e90s and newer BMWs are notorious for developing scary noises out of nowhere, and it's always difficult to diagnose a car noise you can't quite locate. Today, we dive into my BMW e36 328i's cooling system and serpentine belts to fix a squeak/rattle. Will it work? Who knows.
Things we cover in this video:
- Draining / flushing the radiator and block to remove coolant from the e36
- Tearing down the serpentine belts + cooling system so we can rebuild it
- Rebuilding the e36 cooling system with all new, metal parts (new thermostat, aluminum thermostat housing, all metal water pump)
- installing new belts, pulleys, and tensioners on the front of the M52
- bleeding the cooling system (notoriously difficult on e36 BMWs, and I share a quick tip for bleeding the system without overheating your e36/e46!)
I hope you enjoy this installment of the e36 build series :) if you have a mystery noise coming from your car, I hope this is somewhat helpful.

Пікірлер: 31
@sergiovhhic1730
@sergiovhhic1730 2 жыл бұрын
Dude you're so underrated. Big thumbs up!
@logan-taylor
@logan-taylor 2 жыл бұрын
thank you so much bro!!
@ahmedkhan6080
@ahmedkhan6080 2 жыл бұрын
Supppppppwr underrated!! Literally saving my life with my e36, insanely helpful 😭😭😭
@logan-taylor
@logan-taylor 2 жыл бұрын
thanks so much i appreciate that!!
@dominiccampobasso8616
@dominiccampobasso8616 2 жыл бұрын
one of my favorite e36 KZfaqrs, love the vids bro
@logan-taylor
@logan-taylor 2 жыл бұрын
thank you so much man that means a ton, glad you like the videos 🙏
@Treeees
@Treeees 2 жыл бұрын
Just found your channel and I'm loving binging the videos! Did you make your license plate holder yourself or order it?
@logan-taylor
@logan-taylor 2 жыл бұрын
Thanks so much!! That’s so nice thank you for watching. And the actual mount itself (that mounts the plate off center) is from Amazon I think, it’s been working well so far: a.co/d/2mpRISG
@sibusisoprince.
@sibusisoprince. Жыл бұрын
12:42 what a beauty! Wow. What colour is it ?
@logan-taylor
@logan-taylor Жыл бұрын
ty ty. The paint code is 288 Moreagrun (morea green)
@ChrisWade0690
@ChrisWade0690 Жыл бұрын
The main tensioner is a mechanical tensioner and the replacement is a hydraulic. Not sure if the hydraulic is better, but that's the only part that's available now.
@logan-taylor
@logan-taylor Жыл бұрын
i discovered this later - makes so much sense. the bolt difference is a pain but otherwise the hydraulic version works excellently.
@dylanbenjamin5686
@dylanbenjamin5686 Жыл бұрын
Great content 🤌🏽
@logan-taylor
@logan-taylor Жыл бұрын
tyty 🙏
@dylanbenjamin5686
@dylanbenjamin5686 Жыл бұрын
Bro Like Honestly your context is great I was shocked when I saw the subscription count 🙏Keep it up your channel will blow up ⬆️ Keep us posted with Dory 🤌🏽Love from South Africa 🇿🇦
@logan-taylor
@logan-taylor Жыл бұрын
thank you bro!! Maybe one day ahah. More dory stuff soon!
@S1ckbg
@S1ckbg 6 ай бұрын
if your heat is not strong its probably a bad heater valve.
@r0xy149
@r0xy149 2 жыл бұрын
what radiator and expansion tank would you go for?, also would you swap to electric fan?
@logan-taylor
@logan-taylor 2 жыл бұрын
Probably mishimoto for both, although i’ve heard mixed reviews on some of their other products. Also, people say the expansion tank design makes bleeding the system a bit trickier, but having a metal piece in there is worth the hassle to me. Regarding electric fan: I’ve considered it to help with throttle response + avoid the clutch fan exploding randomly (which is bound to happen at some point lol), but when i do expansion tank + radiator i’m just planning to replace the OEM clutch fan to avoid any headaches with electronics/possible overheating. As long as the clutch fan keeps the car cool and doesn’t explode i’m happy.
@czerka
@czerka 2 жыл бұрын
@@logan-taylor mishimoto stuffs fitment is pretty good. There were a couple things I had to grind a bit to get enough clearance but it was really minor. I drove mine for years in Texas heat without a fan on the stock radiator setup. You're fine without one but the mishimoto efan is easy to install and wire up. A vacuum coolant fill kit takes all the effort out of bleeding and allows you to test for leaks before putting coolant in, totally worth getting one.
@logan-taylor
@logan-taylor 2 жыл бұрын
@@czerka this is all great info, thanks - I don’t mind minor modifications/grinding at all. And if the radiator can handle texas heat i’m sure it’ll handle seattle’s overcast 50 degree days just fine lmao. You may have convinced me to go for an electric fan after all... hmm.
@czerka
@czerka 2 жыл бұрын
@@logan-taylor its really simple, if you get all mishimoto stuff, it'll all fit up together. To wire it you can tap into the windshield sprayer pump for keyed power, the battery jump point at the top right of the bay for constant power, and there is a factory ground near the strut tower in the same area.
@logan-taylor
@logan-taylor 2 жыл бұрын
@@czerka sounds simple enough - thanks for the advice. I’ll check it out.
@2JZP
@2JZP 2 жыл бұрын
can you please drop links for the parts? or part numbers.
@logan-taylor
@logan-taylor 2 жыл бұрын
sure thing: - belt and drive kit: www.fcpeuro.com/products/bmw-accessory-drive-belt-kit-11287636378kt - metal impeller water pump: www.fcpeuro.com/products/bmw-water-pump-11517527910h - Aluminum thermostat housing: Terisass Thermostat 11531740437 Aluminum Car Engine Coolant Thermostat Housing Cover with Gasket for M3 Z3 E34 E36 11531722531 www.amazon.com/dp/B07TD5Q2BQ/ref=cm_sw_r_cp_api_i_YZW1P57MASTEEYNRXFHB - BorgWarner thermostat: www.fcpeuro.com/products/bmw-thermostat-92c-wahler-oem-11537511083 - BMW blue coolant: www.fcpeuro.com/products/bmw-coolant-antifreeze-82141467704 Don’t forget a few gallons of DISTILLED water to flush the system! Then have an extra gallon or two on hand to make a 50/50 mix of coolant/water when you refill the system :)
@2JZP
@2JZP 2 жыл бұрын
@@logan-taylor thanks alot man keep up the good work.
@logan-taylor
@logan-taylor 2 жыл бұрын
No problem at all! and thank you :)
@blixe2749
@blixe2749 2 жыл бұрын
Hey bro you have a Instagram
@logan-taylor
@logan-taylor 2 жыл бұрын
yeah!! Rarely post on my personal, but transitioning to 100% car content soon: @loganandrewtaylor
81 year old daredevil wants a Surron e-bike…  #surron #ebike
0:26
Giving my E36 a rear end makeover
11:33
Logan Taylor
Рет қаралды 8 М.
艾莎撒娇得到王子的原谅#艾莎
00:24
在逃的公主
Рет қаралды 50 МЛН
Box jumping challenge, who stepped on the trap? #FunnyFamily #PartyGames
00:31
Family Games Media
Рет қаралды 33 МЛН
黑天使遇到什么了?#short #angel #clown
00:34
Super Beauty team
Рет қаралды 43 МЛН
E36 Cooling System Bleed DIY
15:30
Quinn Clark
Рет қаралды 84 М.
Mystery of the Gurgling Heater Core
7:04
spelunkerd
Рет қаралды 382 М.
I put $10000 Worth of Parts in a SCRAP Volvo V70R
26:21
WheelemVerb
Рет қаралды 722 М.
I Got Another Car! Can I Get It Running???
13:13
Gio BMX
Рет қаралды 2,3 М.
Modding my E-Ride Pro with Surron parts (it almost worked)
9:19
Logan Taylor
Рет қаралды 32 М.
reparer son compteur e36 pour zéro euro ?
20:59
Dr bidouille
Рет қаралды 3,2 М.
WhistlinDiesel Cybertruck Durability Test #1
21:55
WhistlinDiesel
Рет қаралды 21 МЛН
Will it Explode?! Cheap Turbocharged V8 | Tony Angelo's Stay Tuned
35:17
I Built a Transparent Boomerang (it's lethal)
13:10
Mike Shake
Рет қаралды 3,9 МЛН
艾莎撒娇得到王子的原谅#艾莎
00:24
在逃的公主
Рет қаралды 50 МЛН